No matching filters. Try another name.
Total Oilfield Rentals
Candidates need a valid Class 1 driver's licence and all required training certificates. Experience operating winch tractors or bed trucks in oilfield settings is an asset.
winch tractor, bed truck, winch line, trailer, chains
Dexterra
5+ YOECandidates need a high school education plus an apprenticeship or Journeyman certification, at least 5 years of plumbing experience, and knowledge of plumbing, gas fitting and HVAC codes. They must be able to lift up to 45 lbs, read and sketch details, and maintain a strong commitment to health and safety.
power tools, hand tools, PEX crimpers, threaders, torches
Dexterra
5+ YOECandidates need a Journeyman Plumbing certificate, Gas Fitter Technician certification, a valid driver's licence and about 5 years of plumbing experience. They should be able to use hand and power tools safely and work both alone and in a team.
PEX cutter, Crimping tool, Drill, Torch, Pipe bender, Manometer
Dexterra
5+ YOECandidates need a Journeyman Plumbing certificate, Gas Fitter Technician certification, a valid driver's licence and about 5 years of plumbing experience. They should be able to use hand and power tools safely and work both alone and in a team.
PEX cutter, Crimping tool, Drill, Torch, Pipe bender, Manometer
Arcadis
12+ YOECandidates need 12 to 15 years of civil or water engineering experience, mostly on site, with a bachelor's degree in a relevant engineering field. Registration as a Professional Engineer with EGBC is expected before mobilisation, along with knowledge of BC and AWWA standards and buried pipe construction.
Documentation, Welding, Inspection, P.Eng., Plumbing, Communication skills
Arcadis
10+ YOECandidates need a Civil Engineering degree and 10-15 years of municipal linear infrastructure experience in Ontario, including GTA project work. A P.Eng. is a strong asset, and trenchless construction experience is highly valued.
AutoCAD, Civil 3D
Neegan Burnside Ltd.: A diverse, majority Indigenous owned Civil Engineering and Environmental Services company focused on Indigenous and First Nation community clients,…
2+ YOENeegan Burnside Ltd. needs candidates with a diploma in civil, environmental or construction management, or drafting, plus at least 2 years of AutoCAD and Civil 3D experience. Strong attention to detail, organization, and Microsoft 365 skills are also required.
AutoCAD, Civil 3D, Microsoft 365, SharePoint, PDF editing tools
The Redpath Group: Established in 1962, The Redpath Group is an experienced, full-service solutions provider to the global underground mining industry.
2+ YOECandidates need at least 2 years of mining experience, Ontario Basic Underground Hard Rock Miner certification with the listed specialty modules, and the ability to read mine plans. Strong safety awareness and the ability to follow written and verbal instructions are essential.
jackleg drill, stoper drill, long tom, pneumatic drill, bolter, scoop tram
The Redpath Group: Established in 1962, The Redpath Group is an experienced, full-service solutions provider to the global underground mining industry.
2+ YOECandidates need construction mining experience: five years as a lead construction miner for supervisor, three years for leader, and two years in a related construction role for miner. Ontario Hard Rock Underground Common Core certification is required, along with the ability to read civil and mine prints.
jackleg drill, stoper, LHD unit, scissor truck, boom truck, shotcrete sprayer
The Redpath Group: Established in 1962, The Redpath Group is an experienced, full-service solutions provider to the global underground mining industry.
2+ YOERedpath needs underground mining experience of at least two years for miners and truck drivers, and some mining environment experience or a transferable skill for offsiders. Preferred credentials include the Ontario Basic Underground Hard Rock Miner Common Core, and candidates must be able to read mine plans and follow WHMIS and Five Point Safety System rules.
LHD, scoop tram, bolter, jumbo drill, pneumatic hand-held drill, scissor truck
The Redpath Group: Established in 1962, The Redpath Group is an experienced, full-service solutions provider to the global underground mining industry.
2+ YOERedpath needs miners with at least 2 years of mining experience, Ontario Basic Underground Hard Rock Mining certification (U0010, U0068A, U0068B, Common Core), and the ability to read mine plans. Candidates must work safely in hot, confined conditions and follow WHMIS and the Five Point Safety System.
LHD, scissor truck, scoop tram, scaling bar, pneumatic hand-held drill, mechanized bolter
Weatherford: Weatherford International plc (Nasdaq: WFRD) is a leading global energy services company.
Candidates need a high school diploma, 0-2 years of oil and gas experience, basic computer and math skills, and awareness of NDT, NDE and ATEX policies. Strong troubleshooting, reading and writing skills and the physical ability to do the work are also required.
hammers, hoists, cranes, drills, wrenches, precision measuring instruments
Weatherford: Weatherford International plc (Nasdaq: WFRD) is a leading global energy services company.
Weatherford needs candidates with a high school diploma, 0-2 years of oil and gas experience, and basic computer and math skills. Strong problem-solving, reading and writing skills, and the physical ability to do the work are also required.
Hammers, Hoists, Cranes, Drills, Wrenches, Precision measuring instruments
Bridgemans Services
Candidates need barge equipment and crane or rigging experience, plus Marine First Aid/CPR, MED DVS, WHMIS, Fall Protection and Basic Rigging certifications. A CWB FCAW welding ticket is an asset.
Vibratory hammer, Derrick barge, Pneumatic drill, Skid steer, Telehandler, Boom lift
MacKay Contracting
Candidates need previous pipelaying experience, the ability to read construction drawings and a valid Class 5 driver's licence. They must be able to work in confined spaces and outdoors in all weather, lift up to 23 kg, and be flexible with hours and travel.
laser level, grade rod, transit level, tamping equipment, light vehicles
SCR Mining & Tunnelling
2+ YOECandidates need at least 2 years of experience as an underground development miner, with jackleg heading or Long-Tom experience an asset. They must be able to follow instructions, work well in a team, and be legally authorized to work in Canada.
Long-Tom, hand-held pneumatic drills, scoop tram, scissor truck, chain blocks
SCR Mining & Tunnelling
5+ YOE5+ MgmtCandidates need at least five years of supervisory experience in development mining and a strong understanding of safe mining practices. They must follow verbal and written instructions and be legally authorized to work in Canada.
hand-held pneumatic drill, scissor truck, chain block
West Red Lake Gold Mines: (TSXV: WRLG; OTCQB: WRLGF) is a mineral exploration company that is publicly traded and dedicated to creating value for its shareholders by…
3+ YOECandidates need at least 3 years of underground hard rock mining experience, ideally as a scoop operator, plus knowledge of mining methods, ground control and mine safety. Strong safety commitment, teamwork and physical fitness for demanding underground conditions are required.
LHD (load-haul-dump), Remote mucking system, Ore chute, Conveyor system, Drill, Ventilation pipe
Soluroc
2+ YOECandidates need at least 2 years of hands-on fabrication and welding experience, with proven chrome carbide overlay, FCAW-S and MIG skills. They must read technical drawings and welding symbols, use measuring tools, and work independently and in a team.
Grinders, Torches, Drills, Saws, Calipers, Overhead crane
Magna International Inc.
3+ YOECandidates need a recognized electrician certificate (Industrial or Construction and Maintenance), at least 3 years of automotive tooling and integration experience, and knowledge of the electrical code. They must bring their own tools and be able to work safely with lockout procedures.
Pipe benders, Hydraulic knock-out, Crimpers, Soldering iron, Genie lift, Drill press
Magna International Inc.
5+ YOECandidates need at least 5 years of automotive assembly or tooling experience. They must read blueprints and schematics, use hand and machine tools, and bring their own tools.
Parker 801 hose, Hand benders, Power threaders, Lathe, Milling machine, Drill press
15 companies