“Mold Injection Unit” jobs in Canada

No matching filters. Try another name.

Results

• 11h

  Licensed Tool & Die Maker

  London, ON

  $45/hr

  

  Leggett & Platt

  2+ YOECandidates need a valid 430A Tool and Die Maker or 431A Mold Maker licence, 2+ years in a precision tool shop, and skills in manual and CNC machining, MIG and TIG welding, blueprint and GD&T reading, and precision metrology. Strong math, problem-solving and communication skills are also required.

  CNC machine tools, Lathe, Grinder, CMM, Micrometer, Gauge blocks

  23d

  Manufacturing Engineer Manager

  London, ON

  

  Leggett & Platt

  5+ YOE5+ MgmtCandidates need a technical bachelor's degree such as mechanical or industrial engineering, with a master's preferred and P.Eng certification. They must have at least 5 years of operational leadership, automotive experience, people management and project management experience.

  ERP systems, PLC control systems, Vision inspection systems

  29d

  309A/442A Electrician/Maintenance Technician

  London, ON

  $45/hr

  

  Leggett & Platt

  2+ YOECandidates need a valid 309A or 442A industrial electrician license, 2+ years in automotive manufacturing, and hands-on experience with robots, vision systems, controls and 575VAC industrial voltages. Strong troubleshooting and communication skills are required.

  Cognex vision systems, Keyence vision systems, forklift

  29d

  309A/442A Electrician/Maintenance Technician

  London, ON

  $45/hrFull Time

  

  Leggett & Platt

  2+ YOECandidates need a valid 309A or 442A industrial electrician licence, 2+ years in automotive manufacturing, and hands-on experience with robots, vision systems, controls and industrial voltages up to 575VAC. Strong troubleshooting and communication skills are also required.

  Robot systems, Vision inspection systems, Hydraulic equipment, Pneumatic equipment, Forklift

• 11h

  Corporate Tooling - Tooling Engineer

  Kitchener, ON

  

  Mitchell Plastics

  Mitchell Plastics needs a certified mould maker or equivalent education and hands-on experience with injection molds, plus mold flow analysis and metallurgy knowledge. Candidates also need strong communication skills, experience quoting tooling, and proficiency in MS Office; CAD experience is an asset.

  MS Office, Excel, Word, CAD

• 1d

  Sr. NPI Supply Chain Program Manager

  Ottawa, ON

  Full Time

  LO

  Lumentum Ottawa ULC

  7+ YOELumentum Ottawa needs candidates with at least 7 years of relevant experience and a technical diploma or degree in electronics, optics or mechanical engineering. Strong project management, analytical, communication and cross-functional leadership skills are required.

  Oracle ERP, MRP, PLM

• 2d

  Product Development Team Lead (Medical & Diagnostics)

  Toronto, ON

  HybridFull Time

  

  Inertia

  6+ YOECandidates need a relevant engineering degree and 6+ years of medical device development experience under ISO 13485 or ISO 9001, plus knowledge of standards such as ISO 14971, IEC 60601 and IEC 62366. Strong project leadership, client-facing communication and CAD skills are also required.

  JIRA, SolidWorks, Onshape, Altium

• 4d

  Mechanical Designer

  Calgary, AB

  Full Time

  EI

  Ecolab Inc.

  8+ YOECandidates need a diploma in mechanical engineering technology or a related bachelor's degree, 8+ years of experience including 3 years designing or manufacturing physical products, and proficiency in 3D CAD and drawing creation. Strong communication skills are also required.

  SolidWorks, PDM, PLM

  9d

  Mechanical Designer

  Calgary, AB

  Full Time

  EI

  Ecolab Inc.

  5+ YOECandidates need a diploma in mechanical engineering technology or design, five years of relevant experience including three in physical product or hardware design, and strong 3D CAD and technical drawing skills. Preferred experience includes GD&T (ASME Y14.5), design for manufacturing and assembly, and PDM/PLM systems.

  SolidWorks, PDM system, PLM system

• 4d

  Mechanical Designer

  Calgary, AB

  Full Time

  CC

  (CAN) CoolIT Systems Inc.

  8+ YOECoolIT Systems asks for a mechanical engineering technology diploma or a related bachelor's degree, plus 8+ years of relevant experience, including 3 years designing or manufacturing physical hardware. Candidates need strong 3D CAD and drawing skills, and good communication.

  SolidWorks

  9d

  Mechanical Designer

  Calgary, AB

  Full Time

  CC

  (CAN) CoolIT Systems Inc.

  5+ YOECandidates need a diploma in mechanical engineering technology or mechanical design, at least 5 years of relevant experience including 3 years designing or manufacturing physical hardware, and proficiency in 3D CAD and technical drawings. Strong verbal and written communication skills are also required.

  SolidWorks, PDM system, PLM system

• 17d

  Maintenance Technician (Electrician)

  Windsor, ON

  $45.23–$45.98/hr

  

  CpK Interior Products Inc

  2+ YOECandidates need a high school education, a valid Electrical License (309A or 442A) and 2-3 years of manufacturing or automotive experience. They must read electrical schematics and manuals in English and troubleshoot electrical and mechanical problems; robotics, PLC and HMI experience is preferred.

  PLC, HMI, robotics systems, LOTO equipment, communication devices

• 21d

  Senior Mechanical Designer

  Vancouver, BC

  Full Time

  

  Avigilon Corporation

  3+ YOECandidates need a bachelor's degree and at least 3 years of mechanical engineering experience. Proficiency in CREO or SolidWorks, injection molding, die casting, sheet metal and machining design, and FEM analysis is needed.

  CREO, SolidWorks, CAE tools

• 23d

  Test Engineer

  Richmond, BC

  $94k–$118k/yrFull Time

  

  Dometic Corporation

  4+ YOECandidates need a university or institute qualification in electro-mechanical engineering, or an equivalent mix of education and experience, and ideally about 4 years in R&D test or design. Strong analysis, electro-mechanical and communication skills are required.

  Creo, Windchill, SolidWorks, Excel, Word, PowerPoint

• 26d

  General Labourer (Rod Guide Operator)

  Nisku, AB

  On-siteFull Time

  N

  NOV

  1+ YOECandidates need a high school diploma or equivalent and basic understanding of hydraulics and electrical troubleshooting. At least one year of experience with oilfield tubulars or sucker rods, and mold injection training, are assets.

  Mold Injection Unit

• 27d

  Set Up Technician

  Beamsville, ON

  $28–$36/hrFull Time

  

  Randstad Canada

  2+ YOECandidates need 2 to 4 years of hands-on injection molding mold change experience, solid mechanical aptitude, and the ability to operate overhead cranes and rigging. A high school diploma is required, and forklift or crane certifications are strong assets.

  overhead crane, rigging equipment, injection molding machine, thermolator, chiller, dryer

  27d

  Set Up Technician

  Beamsville, ON

  $28–$36/hrFull Time

  

  Randstad Canada

  2+ YOECandidates need 2 to 4 years of hands-on experience with injection molding machine setups and mold changes, plus good mechanical aptitude and crane and rigging skills. A high school diploma is required, and forklift or overhead crane certification is an asset.

  overhead crane, rigging equipment, thermolator, chiller, dryer, loader

• 29d

  Manufacturing Development Engineer - Arbutus Medical

  Burnaby, BC

  Full Time

  

  BLANKSLATE Partners

  7+ YOECandidates need a bachelor's degree in an engineering discipline and ideally 7 to 10 or more years of experience taking physical products into manufacturing. Medical device experience, strong CAD and GD&T skills, and experience with suppliers and regulated quality systems are strongly preferred.

  SolidWorks, 3D printers, CNC equipment, Injection molding equipment

• 29d

  Injection Molding Process Engineer

  London, ON

  On-siteFull Time

  

  Starlim North America: Starlim is one of the world’s largest liquid silicone injection molders and manufacturer, serving as an industry leader in the mass production of…

  3+ YOEStarlim North America needs a college diploma or technical apprenticeship and 3 to 5 years of fully automatic injection molding experience. Candidates should know quality systems such as ISO 9001, TS 16949, ISO 13485 and APQP, and have experience with 8D complaint resolution and reading technical drawings.

  injection molding machine, robotics, gauges and measuring equipment, crane, hoist

  29d

  Process Technician

  London, ON

  On-siteFull Time

  

  Starlim North America: Starlim is one of the world’s largest liquid silicone injection molders and manufacturer, serving as an industry leader in the mass production of…

  2+ YOECandidates need a college diploma plus an apprenticeship or equivalent, and two to three years of experience running fully automatic injection molding. Experience with quality systems such as ISO 9001 or ISO 13485 and strong problem-solving and technical drawing skills are expected.

  Measuring equipment and gauges, Robotics

• 29d

  Director of Assay Development and Consumables Integration - Handheld Systems

  Canada

  On-siteFull Time

  WE

  w EPOCAL INC.

  12+ YOECandidates need at least 12 years of progressive experience in the IVD or medical device industry, including electrochemical sensor development, reagent chemistry, microfluidics and point-of-care product launches. Strong knowledge of FDA QSR, ISO 13485, IVDR and ISO 14971 is required, along with a bachelor's degree in a scientific or engineering field.

  Process improvement, Leadership, Product comprehension, Data analysis, Hazard assessment, Regulatory compliance

  29d

  Director of Assay Development and Consumables Integration - Handheld Systems

  Canada

  On-siteFull Time

  WE

  w EPOCAL INC.

  12+ YOECandidates need at least 12 years of medical device or diagnostics experience, a bachelor's degree in a science or engineering field, and proven leadership of R&D teams. Hands-on skills in electrochemical sensors, reagent chemistry, microfluidics and high-volume plastic manufacturing are required.

  Injection molding equipment, Automation equipment

• 29d

  Mould Set Up (Afternoons)

  Vaughan, ON

  $28–$29/hrFull Time

  

  Magna Exteriors Inc.

  3+ YOECandidates need a high school diploma or technical post-secondary education, plus 3 to 5 years of injection molding experience at set-up or process engineering level. Valid forklift licence, knowledge of press controls and SPC, WHMIS and QS9000, and the ability to lift up to 50 lbs are required.

  injection molding machine, forklift, crane, press controls

  29d

  Mould Set Up (Nights)

  Vaughan, ON

  $28–$29/hrFull Time

  

  Magna Exteriors Inc.

  3+ YOECandidates need 3 to 5 years of injection moulding experience at the set-up or process engineering level, plus a high school diploma or technical post-secondary education. They must hold or be willing to obtain forklift and crane licences and be able to lift up to 50 lbs and move heavy moulds in tight areas.

  injection molding machine, forklift, crane, press controls

15 companies