“Phase noise test set” jobs in Canada

No matching filters. Try another name.

Results

• 1h

  RF Technologist

  Ottawa, ON

  Full Time

  NT

  Nanowave Technologies Inc.

  5+ YOECandidates need a two or three-year college diploma in electrical, electronics, computer or telecommunications engineering technology, plus 5+ years of RF or microwave technologist experience. Preferred: 10+ years of experience with frequency synthesizers, phase-locked loops and signal sources, and eligibility for CGP registration.

  Spectrum Analyzer, Network Analyzer, Phase noise test set, Power meter, Oscilloscope

• 5d

  Principal Analog Mixed Signal Designer - 19497

  Mississauga, ON

  S

  Synopsys

  5+ YOECandidates need a PhD with 5+ years or a Master's with 8+ years of hands-on analog IC design experience. Strong CMOS skills, detailed SerDes sub-circuit design experience and SPICE simulation expertise are required.

  SPICE simulators, Verilog-A, schematic entry tools, physical layout tools, MATLAB, Python

• 5d

  General Labourer / Technician

  Weyburn, SK

  Full Time

  

  Primus Workforce

  Candidates need a Grade 12 diploma, a Class 5 driver's licence, and SCOT certification. Mechanical aptitude, process monitoring skills, and comfort working outdoors and at heights are also needed.

  HMI, production software, pumps, valves, filtration units, conveyor

  5d

  Sample Preparation Technician

  Weyburn, SK

  Full Time

  

  Primus Workforce

  Candidates need a Grade 12 diploma, a Class 5 driver's licence, and SCOT certification. Mechanical aptitude, careful data recording, and clear communication are essential, and experience with brine systems or industrial sites is an asset.

  pumps, valves, filtration units, brine mixing equipment, conveyor, HMI

• 6d

  Project Manager – New Installations & Service

  Richmond Hill, ON

  AL

  ABI LTD.

  5+ YOECandidates need a degree or diploma in an engineering or business field and at least 5 years of project management experience, including on-site installation and commissioning. Strong planning, communication and problem-solving skills are required, and French and PMP certification are assets.

  MS Project, Microsoft Office

• 7d

  Principal Applications Engineer

  Ottawa, ON

  

  SiTime Corporation: SiTime Corporation (Nasdaq: SITM), the market leader in silicon MEMS timing, is an analog and semiconductor company that is revolutionizing the…

  Candidates need a bachelor's or master's degree in a related field and experience with high-speed signal measurement, clock termination, phase noise and jitter, and PLL theory. Lab skills with oscilloscopes, Python automation, and customer support are also needed, along with fluent English.

  Oscilloscope, Python, Schematic capture tools, Lab bench test equipment

  14d

  Sr. Engineer, Mixed Signal ASIC Systems

  Ottawa, ON

  

  SiTime Corporation: SiTime Corporation (Nasdaq: SITM), the market leader in silicon MEMS timing, is an analog and semiconductor company that is revolutionizing the…

  3+ YOECandidates need 3 to 5 years of experience in high-frequency signals, timing or embedded systems, a bachelor's degree in electrical engineering or a related field, and strong English. Hands-on lab experience with oscilloscopes and power supplies and knowledge of serial protocols are needed.

  oscilloscope, frequency counter, signal generator, Python, GitLab, SCPI

  26d

  Sr. Engineer, Staff Analog Design

  Ottawa, ON

  

  SiTime Corporation: SiTime Corporation (Nasdaq: SITM), the market leader in silicon MEMS timing, is an analog and semiconductor company that is revolutionizing the…

  10+ YOECandidates need a Master's or PhD in Electrical Engineering, 10+ years in analog/mixed-signal CMOS design, and PLL design experience. Cadence tools and lab characterization experience are also required.

  Cadence, SystemVerilog, Verilog-A

  26d

  Sr. Analog Engineer

  Ottawa, ON

  

  SiTime Corporation: SiTime Corporation (Nasdaq: SITM), the market leader in silicon MEMS timing, is an analog and semiconductor company that is revolutionizing the…

  3+ YOECandidates need a Master's or PhD in Electrical Engineering and 3+ years of analog or mixed-signal IC design experience. Experience with CMOS or BiCMOS design, Cadence simulation tools and hands-on lab characterization is expected.

  Cadence

  26d

  Engineer, Staff Analog Design

  Ottawa, ON

  

  SiTime Corporation: SiTime Corporation (Nasdaq: SITM), the market leader in silicon MEMS timing, is an analog and semiconductor company that is revolutionizing the…

  6+ YOECandidates need a Master's or PhD in Electrical Engineering and 6+ years of analog or mixed-signal IC design, including PLL design, CMOS or BiCMOS experience, and hands-on lab characterization.

  Cadence, SystemVerilog, Verilog-A, AMS

• 14d

  Senior Photonic Engineer - Experimentalist

  Toronto, ON

  HybridFull Time

  

  Xanadu: is a Canadian quantum technology company, and one of the world's leading photonic quantum hardware providers.

  Candidates need an M.Sc. or Ph.D. in quantum optics, photonics, AMO or electrical engineering, plus lab research experience. Xanadu asks for hands-on optical and RF lab skills, Python for data acquisition and analysis, and the ability to build mathematical models of physical systems.

  oscilloscope, signal generator, spectrum analyzer, photodiodes, Python

  14d

  Photonics Engineer - Experimentalist

  Toronto, ON

  HybridFull Time

  

  Xanadu: is a Canadian quantum technology company, and one of the world's leading photonic quantum hardware providers.

  2+ YOEXanadu needs candidates with a PhD in AMO, quantum optics, photonics or nonlinear optics. They should have hands-on optical lab experience, knowledge of phase-locking and high-speed modulators, and skill with Python or MATLAB.

  oscilloscope, signal generator, spectrum analyzer, Python, MATLAB, IQ modulator

  14d

  Lead Engineer - Laser Systems

  Toronto, ON

  HybridFull Time

  

  Xanadu: is a Canadian quantum technology company, and one of the world's leading photonic quantum hardware providers.

  10+ YOECandidates need 10+ years in high-performance photonics, including semiconductor lasers, optical amplifiers and EO modulators. They also need experience with laser stabilization, noise control (RIN and phase noise), vendor management and new product introduction.

  laser stabilization electronics, photonic integrated circuit test systems

• 14d

  Research Technologist - Hydrometallurgy & Hydrometallurgy Pilot Operations

  Ottawa, ON

  NR

  Natural Resources Canada - Lands and Minerals Sector - CanmetMINING

  Candidates need a post-secondary diploma or degree in chemistry, metallurgy, mineral processing, materials science or a related field, plus hands-on wet-chemistry or laboratory experience. Strong English, teamwork and the ability to work with minimal supervision are essential.

  ICP-OES, ICP-MS, XRF, UV-Vis, filtration equipment

• 18d

  Compliance & Enforcement Officer – 12-Month Term

  Terrace, BC

  HybridFull Time

  BE

  BC Energy Regulator

  2+ YOECandidates need a bachelor's degree or technical diploma in law enforcement or natural resource management, or Grade 12 plus post-secondary courses with 5 years of experience. Experience in compliance and enforcement, the oil and gas or energy sector, and investigations is required, and the role needs safe handling of firearms, vehicles and dangerous substances.

  firearms, vehicles, boats, air quality monitoring equipment, noise monitoring equipment, compliance data management system

• 19d

  Project Coordinator

  Calgary, AB

  Full Time

  

  Pinchin Canada

  5+ YOECandidates need a bachelor's degree in environmental science or engineering, or an environmental science diploma, plus at least 5 years of related experience. Strong writing, organizational and client-facing skills are required, as is a valid driver's licence and a personal vehicle.

  Microsoft Word, Microsoft Excel, Outlook

  20d

  Project Technologist

  Saint John, NB

  Full Time

  

  Pinchin Canada

  5+ YOEPinchin Canada needs a college diploma in construction or architectural technology, or an engineering degree, plus strong communication and attention to detail. Experience in indoor air quality, hazardous materials or occupational hygiene is an asset, and a valid driver's licence and personal vehicle are required.

  Microsoft Word, Microsoft PowerPoint, Microsoft Excel, Microsoft Outlook, field sampling equipment

• 20d

  Hardware Designer

  Remote in Canada

  $95k–$145k/yrRemoteFull Time

  

  Fidus Systems: Founded in 2001, Fidus Systems is a premier electronic system design and development company with specialized expertise in FPGA design, embedded…

  5+ YOECandidates need at least 5 years of electronics design experience and a degree in electrical or computer engineering. Strong knowledge of high-speed circuits, multi-layer PCB design and high-speed protocols such as PCIe, DDR4 and USB-C is required.

  OrCAD Capture CIS, Cadence Allegro, LTSpice, oscilloscope, VNA, signal generator

• 21d

  Power Delivery Design Engineer

  Toronto, ON

  Full Time

  IT

  Intel Technology of Canada, ULC

  5+ YOECandidates need a Bachelor's or Master's in Electrical Engineering or a related field and 5+ years designing multi-phase DC-DC regulators and running power delivery network simulations. Experience with oscilloscopes, hardware debugging and working with signal and power integrity and layout engineers is also required.

  Cadence Sigrity PowerDC, Cadence Sigrity PowerSI, Ansys SIwave, LTspice, SIMPLIS, oscilloscope

• 22d

  Principal Optical Systems Engineer

  Ottawa, ON

  CC

  Celero Communications, Inc.

  10+ YOECandidates need a master's or PhD in electrical engineering, optical communications, photonics or a related field, plus 10+ years in coherent optical or high-speed communication systems. Hands-on experience with coherent DSP verification, optical test equipment and Python, MATLAB or C is required.

  OSA, RTO, DCA, AWG, Python, MATLAB

• 22d

  Laboratory Technician I

  Calgary, AB

  Full Time

  CL

  Core Laboratories Canada Limited

  2+ YOECandidates need a post-secondary diploma or equivalent, preferably with two or more years of lab experience. They must read English standards such as ASTM and UOP, use Microsoft Office, and work with petroleum odours and protective respiratory equipment.

  PVT equipment, high-pressure sample cylinders, Microsoft Office

• 25d

  Project Engineer Mechanical (4-7 years)

  Brossard, QC

  

  Bronswerk Group: The company is relied on as an OEM in Naval equipment, with a full range of shock, vibration, and noise qualified equipment.

  4+ YOECandidates need a bachelor's degree in mechanical engineering, 4 to 7 years of experience, and HVAC or refrigeration design experience. Bronswerk Group also requires strong 2D and 3D design skills, AutoCAD and Inventor or SolidWorks, and bilingual French and English.

  AutoCAD, Inventor, SolidWorks

• 25d

  Sr. Loudspeaker Systems - In office

  Mississauga, ON

  $120k–$155k/yrFull Time

  

  Randstad Canada

  7+ YOECandidates need a bachelor's or master's degree in electrical, acoustical or software engineering, plus 7+ years designing high-end audio electronics. Strong skills in filter mathematics, DSP simulation and low-distortion mixed-signal circuit design are required.

  Matlab, Mathcad, Klippel R&D systems, Audio Precision, Dream DSP, C#

• 26d

  RQ08478 - Data Architect/Modeller - Senior

  Toronto, ON

  RP

  Rubicon Path

  5+ YOECandidates need a Professional Engineering licence valid in Ontario, a bachelor's degree in electrical engineering or a related field, and at least 5 years in wireless telecom. They also need deep knowledge of P25, LMR, RF design, antennas and propagation, and TSB-88.

  Planet RF planning tool, spectrum analyzer, network analyzer, power meter, noise figure analyzer, Microsoft Excel

16 companies