“digital multimeter” jobs in Canada

No matching filters. Try another name.

Results

• 6h

  Electronics Engineer

  Burnaby, BC

  $43.27–$57.69/hrContract

  

  Actalent: Actalent is an operating company of Allegis Group, the global leader in talent solutions.

  Candidates need experience designing power electronics such as DC/DC or AC/DC, PCB design in Altium Designer or similar, and microcontroller-based hardware. Knowledge of EMI/EMC, safety, and moving products from prototype into production is also required. An EIT or P.Eng is an asset.

  Altium Designer, oscilloscope, multimeter, electronic load

  2d

  Hardware Test Enginer

  Ottawa, ON

  $50–$70/hrContract

  

  Actalent: Actalent is an operating company of Allegis Group, the global leader in talent solutions.

  5+ YOECandidates need at least 5 years of hardware testing experience, including board-level and system-level testing, EMI/EMC and environmental testing, plus a bachelor's degree in electrical engineering or a related discipline. Experience with military, aerospace or space design practices and FMECA is a strong asset.

  Oscilloscope

• 8h

  Embedded Software/Firmware Engineer

  Mississauga, ON

  $75k–$95k/yrOn-siteFull Time

  AT

  Axiomatic Technologies Corporation

  3+ YOECandidates need 3–5 years of embedded software or firmware experience and a bachelor's degree or higher in computer engineering, computer science or a related field. Strong C/C++ skills, familiarity with electronic circuits and hands-on use of oscilloscopes and multimeters are required.

  C, C++, Java, Dart, oscilloscope, digital multimeter

• 16h

  Mechatronics Lab Engineering Intern (January - August 2027)

  Vancouver, BC

  $30–$33.75/hrOn-siteInternship

  

  Rivian and Volkswagen Group Technologies

  Rivian and Volkswagen Group Technologies needs a student in an engineering program at a Canadian university. Candidates need soldering, electrical testing and scripting skills, and some lab experience with hardware.

  Power analyzers, Variable power supplies, Digital multimeters, Atlassian Jira, Atlassian Confluence, JAMA

• 1d

  Electronic Technician

  Clairmont, AB

  Full Time

  ?

  4+ YOEStructured technical training and PowerGen qualification; Document findings and communicate equipment condition and repair requirements; Complete all work in accordance with BJ Energy Solutions’ safety requirements and…

  Hydraulic fracturing, Coaching, Troubleshoot, Maintain electronic equipment, Electrical wiring diagrams, Journeyperson

• 2d

  Onboard Installation Technician

  Whitby, ON

  $57k–$74k/yr

  ?

  Ensuring compliance with design documentation, installation methods, quality requirements, and Installation Supervisor instructions; Performing self-checks and supporting peer reviews to ensure electrical installations…

• 2d

  Onboard Installation Technician

  Whitby, ON

  $57k–$74k/yr

  

  Alstom

  Alstom needs candidates with an electrical technology diploma, industrial electrician training or a technical high-school diploma. Experience with electrical wiring, schematics, testing equipment and safety procedures is strongly preferred, and an Ontario 309A or 422A certification is desirable.

  multimeter, continuity tester, Megger, crimpers, wire strippers, torque tools

  9d

  E-Lab Technician

  Whitby, ON

  $70k–$85k/yr

  

  Alstom

  Candidates need soldering and circuit board repair experience, plus the ability to read electrical schematics and diagnose AC and DC faults. Electro-mechanical repair experience and Microsoft Office and Windows skills are also essential.

  Multimeter, Oscilloscope, Insulation tester, Microsoft Office

• 2d

  Senior Technologist, Electronic Shop

  Ottawa, ON

  Full Time

  

  University of Ottawa: Welcome the University of Ottawa's Human Resources LinkedIn page.

  3+ YOECandidates need a college diploma in electronics or a related field, plus at least 3 years of lab or research electronics experience. They also need knowledge of analog and digital electronics, CSA safety practices, LabVIEW, and French and English bilingualism.

  LabVIEW, oscilloscope

• 2d

  Electronics Repair Technician

  Calgary, AB

  Full Time

  ?

  Ensure repaired equipment meets airworthiness, quality, reliability, and customer requirements before release; Support compliance with ISO 9001, AS9100, IPC workmanship standards, and other applicable quality…

  Troubleshooting, Documentation, Inspection, Regulatory compliance, Troubleshoot, Electronics

• 3d

  Electronics Hardware Engineer

  Burnaby, BC

  $100k–$120k/yrOn-siteFull Time

  

  Algo Communication Products: Founded in 1968, Algo has been a telecommunications or information technology company with over 50 years of experience developing, designing, and…

  5+ YOECandidates need a degree, diploma or equivalent practical experience in electrical or electronics engineering, plus at least 5 years of hardware engineering work. Strong skills in circuit design, multi-layer PCB layout, Altium Designer, bench test equipment and embedded communication interfaces are required, along with unrestricted Canadian work authorization.

  Altium Designer, Oscilloscope, Multimeter, Logic analyzer, Spectrum analyzer

• 5d

  Electrician

  Hamilton, ON

  On-siteFull Time

  

  American Iron and Metal: American Iron & Metal (AIM) is a family-owned, Canada-based company founded in 1936.

  2+ YOECandidates need a Red Seal Industrial Electrician ticket (309A or 442A) and 2-5 years of heavy industrial work. Experience with high voltage switchgear, motor starters, PLCs (Siemens, Allen Bradley) and electrical testing equipment is needed, and a valid Ontario driver's licence is required.

  digital multimeter, megohm meter, process meter, thermography equipment, PLC, SCADA

• 5d

  Journeyman Electrician

  Welland, ON

  $39–$41/hrOn-siteFull Time

  

  POWERGROUP Resources

  3+ YOECandidates need a valid Ontario 309A Journeyman Electrician licence and at least 3 years of industrial and commercial electrical experience. Hands-on troubleshooting, PLC and motor control work, testing with diagnostic instruments, and customer-facing service experience are required.

  multimeter, clamp meter, megohmmeter, voltage tester, insulation resistance tester, hand tools

• 7d

  Instrumentation Technician

  Fort McMurray, AB

  

  Regional Municipality of Wood Buffalo

  3+ YOECandidates need a Certified Journeyperson in Instrumentation with three years of journeyperson experience, plus a high school diploma or GED. A valid Class 5 operator's licence and a criminal record check are required, along with the ability to work outdoors in all conditions.

  oscilloscope, multimeter, frequency meter, signal generator, tone generator, SCADA

• 8d

  Electronics Assembly & Test Technician

  Dartmouth, NS

  Full Time

  

  Aplin

  Candidates need Grade 12 plus a community college technician or technologist qualification, or equivalent experience, and must be able to obtain a Canadian government security clearance. Willingness to work day, evening and back shifts is required.

  digital multimeter, oscilloscope, environmental chamber, soldering iron, overhead crane, winch

  10d

  Towed Array Technician

  Halifax, NS

  Full Time

  

  Aplin

  Aplin asks for Grade 12 plus a community college technician or technologist qualification, or equivalent experience. Candidates need to obtain a Canadian government security clearance and work on Controlled Goods projects.

  digital multimeter, oscilloscope, environmental chamber, soldering iron, overhead crane, winch

• 8d

  Electrical Production Technician II [646]

  Burnaby, BC

  On-siteFull Time

  

  D-Wave Quantum

  3+ YOECandidates need a diploma in electrical or electronics engineering technology and 3+ years in electronics manufacturing or production testing. They must read schematics and wiring diagrams, use test instruments and solder, and handle lifts up to 30 lbs.

  Digital multimeter, Oscilloscope, Programmable power supply, Automatic cable tester, NetSuite, Jira

• 10d

  Electronics Engineer

  Medicine Hat, AB

  

  QinetiQ: QinetiQ is an integrated global defence and security company focused on mission-led innovation.

  3+ YOECandidates need a Bachelor of Engineering or equivalent, registration as an EIT with APEGA, and 3 to 5 years designing embedded electronic products. Essential skills include analog and digital circuit design, PCB layout, power electronics, embedded microcontrollers and hardware testing.

  Altium Designer, STM32, Oscilloscope, Multimeter, Logic analyzer

• 11d

  Quality Technician (18-month Contract)

  Waterloo, ON

  Contract

  V

  Voyis

  2+ YOECandidates need a high school diploma and 2+ years of quality control experience in manufacturing. Strong attention to detail, precision measurement skills and the ability to read technical drawings are required.

  calipers, micrometer, microscope, digital multimeter

• 14d

  Electronic Technician (BP228)

  Pickering, ON

  $20–$22/hrFull Time, Contract

  

  Express Employment Professionals: The Express franchise brand is an industry-leading, international staffing company with franchise locations across the U.S., Canada, South Africa,…

  Candidates need post-secondary education in electronics technology or a related field, hands-on experience repairing electronic boards, and strong diagnostic skills. They also need experience with iOS, Android, Windows and macOS, plus strong attention to detail and communication skills.

  multimeter, oscilloscope, Wi-Fi router, NAS storage system

• 15d

  Technicien(ne) de service sur le terrain (Production) – Montréal, Québec

  Montréal, QC

  X

  Xerox

  Xerox needs candidates with advanced electromechanical troubleshooting experience, able to read electrical schematics and use a multimeter. They must have strong customer service and problem-solving skills, a valid driver's licence and ability to lift up to 50 pounds.

  Troubleshoot, Equipment maintenance, Troubleshooting, Customer service, Problem solving, Time management

  15d

  Field Service Technician - Edmonton, AB

  Edmonton, AB

  X

  Xerox

  Candidates need electro-mechanical troubleshooting experience, the ability to use a multimeter and read electrical schematics, and strong customer service and time management skills. A valid driver's licence and automobile insurance meeting company minimums are required.

  multimeter, diagnostic tools, electrical schematics

  17d

  Print Production Field Service Technician - Victoria, BC

  Victoria, BC

  X

  Xerox

  Candidates need advanced electromechanical troubleshooting experience, including multimeter use and reading electrical schematics. They also need strong customer service, problem-solving and time management skills, the ability to lift 50 pounds, and a valid driver's licence.

  multimeter, electrical schematics, diagnostic software

• 15d

  Quality Electrical Engineer

  Calgary, AB

  

  SKF

  3+ YOECandidates need a bachelor's degree in an engineering discipline and 3+ years of relevant experience, plus legal eligibility to work in Canada. They should read electrical schematics, use test equipment, and apply problem-solving methods like 8D and 5-Why.

  Multimeter, Oscilloscope, Hi-pot tester, LCR meter

17 companies