“heavy testing equipment” jobs in Canada

No matching filters. Try another name.

Results

• 32m

  Night Shift - Millwright Journeyman

  Edmonton, AB

  $45.16/hr

  JD

  JV Driver Group

  Candidates need a Millwright JM certificate, a valid Alberta driver's licence and a 5-year driver's abstract, plus strong problem-solving and analytical skills. They must handle physically demanding work at heights, work with minimal supervision and complete pre-access training before mobilization.

  Rigging equipment, Dollies, Vibration analysis equipment, Welding equipment

  32m

  Millwright Journeyman- Night shift

  Edmonton, AB

  $45.16/hr

  JD

  JV Driver Group

  Candidates need a Millwright JM certificate, a valid Alberta driver's licence and a 5-year driver's abstract. They must solve problems, work safely under minimal supervision, do physically demanding work at heights, and complete pre-access training before mobilization.

  rigging equipment, dollies, vibration analysis equipment, tack welding equipment

  32m

  Heavy Duty Equipment Technician JM

  Kitimat, BC

  JD

  JV Driver Group

  Candidates need a Heavy-Duty Equipment Technician journeyperson certification (Red Seal if from outside the province), strong mechanical and diagnostic skills, and a valid driver's licence with a clean abstract. They must also pass pre-access training and drug and alcohol testing.

  Diesel diagnostic software

  32m

  Dual Ticketed - Heavy Duty Equipment Technician JM / Automotive Mechanic JM

  Kitimat, BC

  JD

  JV Driver Group

  Candidates need a Heavy-Duty Equipment Technician journeyperson certification and an Automotive Mechanic journeyperson certification, with Red Seal if certified outside the province. They also need strong problem-solving and mechanical skills, a valid driver's licence with a clean abstract, and the ability to pass drug and alcohol testing and pre-access training.

  Diesel diagnostic software

• 8h

  Full-Time Warehouse Order Selector

  Canada

  $28.82–$43.86/hrFull Time

  SC

  Sysco Canada Corp, Division of Sysco Canada Inc.

  Candidates need to be 18 or older, read and communicate in English, and hold a high school diploma or equivalent. They must pass a background check and a physical abilities test, and warehouse experience is an asset.

  SOS (Sysco Order Selection) unit, Pallet jack, Forklift, Shrink-wrap equipment

• 16h

  Automotive Service Technician - Subaru

  Winnipeg, MB

  

  The Jim Pattison Auto Group

  Candidates need Red Seal certification as an automotive service technician, or be working toward it, plus previous automotive technician experience. They need strong diagnostic skills, attention to detail, a valid Manitoba driver's licence and the ability to drive manual and automatic vehicles.

  hoists, air tools

  16h

  Red Seal Service Technician - Volkswagen

  Surrey, BC

  $38–$50/hr

  

  The Jim Pattison Auto Group

  Candidates need Red Seal certification as an Automotive Service Technician, or be working toward it, plus previous automotive technician experience. A valid BC driver's licence, a satisfactory driver's abstract, and the ability to drive manual and automatic vehicles are required.

  Air tools, Hoists, Diagnostic equipment

• 17h

  CNC Apprentice

  Vaughan, ON

  N

  Noranco

  Candidates need an interest in machining and the ability to read blueprints and use measuring tools, with Fanuc or Mazak control knowledge a must. They must attend a weekly day-release class and lift up to 50 pounds. Aerospace experience and basic computer skills are assets.

  CNC lathe, micrometer, dial gauge, deep micrometer, vernier, height gauge

• 17h

  Nurse 4 - Public Health Nurse - Public Health Inkster

  Winnipeg, MB

  On-site

  

  Winnipeg Regional Health Authority: The WRHA also provides health care support and specialty referral services to nearly 500,000 Manitobans who live outside its boundaries as well as…

  2+ YOECandidates need a Baccalaureate Nursing degree, current College of Registered Nurses of Manitoba registration, and a valid Manitoba Class 5 driver's licence. Two years of recent public health, primary care or community development experience is required, along with leadership, group facilitation and strong English communication skills.

  Motor vehicle, Computer software applications

• 18h

  Swing driver all lines - courtice, on

  Courtice, ON

  $33.97/hrFull Time

  WM

  Waste Management Canada

  2+ YOECandidates need at least 2 years of experience operating a vehicle requiring an AZ or DZ licence, plus past waste experience. They must read, write and speak English well enough to deal with the public and complete reports, and pass a drug screen and physical.

  heavy-duty truck, DVIR form, automatic transmission truck

  18h

  Frontload driver

  Edmonton, AB

  Full Time

  WM

  Waste Management Canada

  1+ YOECandidates need front-end truck experience, a Class 3 licence, and one year of experience operating a CDL vehicle or equivalent military driving within the last seven years. Candidates must be 18 or older, able to speak and read English, and pass a drug screen and physical.

  DVIR

  18h

  Swing, driver commercial

  Brampton, ON

  Full Time

  WM

  Waste Management Canada

  2+ YOECandidates need at least 2 years of experience operating a vehicle requiring a DZ or AZ licence, with one year of commercial driving preferred. They must read, write and speak English, be at least 18, be legally eligible to work in Canada, and pass a drug screen and physical.

  Heavy-duty commercial truck, DVIR form

  18h

  Driver, roll off

  Brampton, ON

  Full Time

  WM

  Waste Management Canada

  1+ YOECandidates need at least one year operating a vehicle requiring a DZ endorsement, a Class A or B CDL with an air-brake endorsement, and English good enough to interact with the public and complete reports. Passing a pre-employment drug screen and physical is required, and a high school diploma is preferred.

  roll-off truck, heavy-duty truck, DVIR

• 19h

  Sto 24r - senior radio communications technologist

  Vancouver, BC

  $81k–$92k/yrFull Time

  BP

  BC Public Service Agency

  5+ YOECandidates need a diploma in electronics or electrical engineering technology with registration or eligibility as an Applied Electronics Technologist, or an engineering bachelor's degree, plus 5 to 7 years of radio communications technologist experience. They also need supervisory experience, radio frequency system design knowledge, a valid BC Class 5 driver's licence, and willingness to obtain a Class 3 licence with air brake endorsement.

  Radio test equipment, Schematics and topographical maps, Forklift, ATV, UTV, Snowmobile

• 19h

  Red seal ug heavy duty mechanic

  Kitimat, BC

  $66.58/hr

  NG

  Newmont Goldcorp Canada

  Candidates need an Interprovincial Red Seal Heavy Duty Equipment Mechanic certification and a valid Class 5 driver's licence or higher. Diesel mobile equipment experience is required, and underground mining experience is an asset. The role is physically demanding, with lifting up to 50 lbs.

  OEM diagnostic tools, drills, scoops, haul trucks, bolters

• 19h

  Greenstone gold mines gp - heavy-duty equipment mechanic (noc 72401)

  Geraldton, ON

  $58.92/hr

  

  Groupe Perspective

  2+ YOECandidates need a high school diploma or equivalent and at least 2 years of professional experience, with fluent spoken and written English.

  computerized testing equipment

• 19h

  Hourly teachers - microsoft network and security administrator (winter 2027)

  Gatineau, QC

  $99.09–$138.27/hrPart Time, Contract

  CH

  Cégep Héritage College

  Cégep Héritage College requires a bachelor's degree or equivalent diplomas or certifications in a relevant field, plus industry experience in the subjects taught. Teaching experience is an asset, along with strong communication skills and the ability to create a motivated learning environment.

  Windows Client, Windows Server, Active Directory, Hyper-V, DNS, DHCP

• 21h

  Reverse Circulation Driller

  British Columbia

  $48–$52/hrFull Time

  

  SKEENA GOLD + SILVER: Skeena is a Canadian mining exploration and development company focused on revitalizing the Eskay Creek and Snip Projects, two past-producing mines…

  3+ YOESkeena needs an experienced RC driller, ideally with about three years of RC work, and Sandvik or comparable RC experience is valued. Candidates need a valid Class 5 driver's licence, the ability to pass a drug and alcohol test and site induction, and strong safety leadership and communication skills.

  Sandvik DI650i, RC drill rig, Cyclone, Splitter, Gyro survey tool, Drill rods and bits

• 23h

  Embedded Software/Firmware Engineer

  Mississauga, ON

  $75k–$95k/yrOn-siteFull Time

  AT

  Axiomatic Technologies Corporation

  3+ YOECandidates need 3–5 years of embedded software or firmware experience and a bachelor's degree or higher in computer engineering, computer science or a related field. Strong C/C++ skills, familiarity with electronic circuits and hands-on use of oscilloscopes and multimeters are required.

  C, C++, Java, Dart, oscilloscope, digital multimeter

• 24h

  Loader Operator, MRF - Afternoon Shift

  Edmonton, AB

  $31.92/hrOn-siteFull Time

  W

  WM

  1+ YOECandidates need at least one year of previous experience. The role is safety sensitive and requires strict compliance with safety rules, including possible drug and alcohol testing.

  Material moving equipment

  24h

  Loader Operator, MRF - Swing Shift

  Edmonton, AB

  $31.92/hrOn-siteFull Time

  W

  WM

  1+ YOECandidates need at least one year of previous experience and must comply strictly with safety rules, since the role is safety sensitive and subject to drug and alcohol testing. They must be able to operate material-moving equipment and perform daily checks and maintenance.

  24h

  Loader Operator, MRF - Day Shift

  Edmonton, AB

  $31.92/hrOn-siteFull Time

  W

  WM

  1+ YOECandidates need at least one year of previous experience and must follow safety rules strictly. The role is safety sensitive and subject to drug and alcohol testing.

• 24h

  Field Service Heavy Duty Mechanic (Surface Drills)

  British Columbia +1

  $46.50/hrFull Time

  SM

  Sandvik MIN, CNS - Canada

  Candidates need a heavy duty mechanic trade certification, with a Red Seal as an asset, and ideally at least 3 years of mining equipment experience. Strong hydraulic and electrical troubleshooting skills, a valid driver's licence, willingness to travel across Canada and to work varied shifts, and legal eligibility to work in Canada are required.

  Surface drills, Hydraulic systems, Electrical schematics, MS Office

• 24h

  Cook

  Collingwood, ON

  Full Time

  

  Chartwell

  Candidates need previous food service cooking experience and a Food Handler certification. They must work well in a team, communicate clearly with customers, and be able to stand for long periods and lift heavy items.

  Cooking tools, Kitchen equipment

15 companies