“rigging tools” jobs in Canada – Page 10

No matching filters. Try another name.

Results

• 17d

  Machine Operator

  Calgary, AB

  Full Time

  

  Benpro Technologies

  Benpro Technologies needs strong mechanical aptitude, comfort with measurements and fractions, and attention to detail. Pipe beveling, fabrication and oxy-acetylene cutting experience and overhead crane operation are assets.

  Beveling equipment, Oxy-acetylene cutting equipment, Grinders, Tape measure, Overhead crane, Slings and rigging

  17d

  General Laborer

  Calgary, AB

  Full Time

  

  Benpro Technologies

  Candidates need strong mechanical aptitude and comfort with fractions, measurements and tolerances. Experience with pipe, oxy-acetylene cutting, grinders and overhead cranes is a strong asset.

  Oxy-acetylene cutting equipment, Grinders, Tape measure, Beveling equipment, Spooling equipment, Overhead crane

• 17d

  Field Trainer

  Nisku, AB

  

  precisiondril

  Candidates need a high school diploma, a valid driver's licence, and field or drilling experience is preferred. Strong communication, presentation and organization skills are required, along with Microsoft and SuccessFactors/SharePoint experience.

  SuccessFactors, SharePoint, rig training equipment

• 17d

  Journeyman/woman Millwright

  Delta, BC

  $47.67/hr

  L

  Lactalis

  2+ YOELactalis needs a Red Seal or BC Journeyman Millwright with at least 2 years of industrial maintenance experience. Candidates should know fluid handling, pneumatic controls, P&IDs, rigging, basic electrical systems and 3-phase motors, and bring their own hand tools.

  hand tools, P&ID

• 18d

  Professional Senior, Engineering - Avionics Systems

  Quebec

  

  Bombardier: Headquartered in Greater Montréal, Québec, Bombardier operates aerostructure, assembly and completion facilities in Canada, the United States and…

  8+ YOECandidates need a university degree in electrical, electronics, software or aerospace engineering, at least 8 years of avionics integration experience, and knowledge of avionics certification standards. Strong communication, problem-solving and teamwork skills are also needed, and willingness to travel.

  IMA, EFIS, EICAS, HUD, GPS, FMS

  19d

  Professional Senior, Engineering - Avionics Systems

  Quebec

  

  Bombardier: Headquartered in Greater Montréal, Québec, Bombardier operates aerostructure, assembly and completion facilities in Canada, the United States and…

  8+ YOECandidates need a university degree in electrical, electronics, software or aerospace engineering and at least 8 years of avionics integration experience. Knowledge of avionics systems, IMA, and standards such as DO-178, DO-160, DO-254 and ARP4754 is an asset, along with strong communication and problem-solving skills.

  IMA environment tools, Test rigs

• 18d

  Cinematic Artist, Screenshot Specialist

  Vancouver, BC

  

  Electronic Arts

  Electronic Arts needs candidates with a strong sense of cinematic language and 3D or real-time engine skills such as Unreal Engine, Maya or 3ds Max. They should know hockey or UFC well, use Adobe Photoshop and Lightroom, and be comfortable taking feedback under deadlines.

  Unreal Engine, Maya, 3ds Max, Adobe Photoshop, Adobe Lightroom, Frostbite

  18d

  Software Engineer (C++), Character Technologies - Frostbite

  Vancouver, BC

  

  Electronic Arts

  5+ YOECandidates need a bachelor's degree or equivalent industry experience and 5+ years of professional C++ and C# engineering. They also need strong 3D math, performance and multithreading skills, and experience with Perforce or Git.

  C++, C#, Frostbite, Perforce, Git

• 18d

  Millwright - Afternoon Shift

  Mississauga, ON

  $29–$43/hrFull Time

  

  Martinrea International Inc.: The company employs approximately 19,000 skilled and motivated people at more than 58 manufacturing, engineering and technical centers in Canada,…

  5+ YOECandidates need a Red Seal 433A certification, at least five years of similar experience, and strong mechanical and electrical skills. They should be able to read blueprints and manuals, work with hydraulic and pneumatic systems, and communicate well in English.

  precision measuring tools, industrial maintenance equipment, presses, welding equipment, ladders, lifts

  18d

  Millwright - Day Shift

  Mississauga, ON

  $29–$43/hrFull Time

  

  Martinrea International Inc.: The company employs approximately 19,000 skilled and motivated people at more than 58 manufacturing, engineering and technical centers in Canada,…

  5+ YOECandidates need a Red Seal 433A certification, at least five years of similar experience, and strong mechanical, hydraulic and pneumatic skills. Good English reading and communication, and the ability to read drawings and manuals, are also required.

  precision measuring tools, industrial maintenance equipment, presses, welding equipment

• 18d

  Rope Access Journeyperson Electrician - Syncrude

  Fort McMurray, AB

  Full Time

  

  Tacten Industrial Inc

  Candidates need a Red Seal or Alberta Journeyperson Electrician credential, industrial electrical and splicing experience, and an IRATA Level 1 ticket or willingness to obtain one. They must live locally in Fort McMurray or be willing to relocate, and hold CSTS/OSSA or OSSA BSO or CSO.

  rope access equipment, fall protection, electrical test equipment

  18d

  Rope Access Journeyperson Electrician - Syncrude

  Fort McMurray, AB

  

  Tacten Industrial Inc

  Candidates need a Red Seal or Alberta Journeyperson Electrician certificate, an IRATA Level 1 ticket (or willingness to obtain one), industrial electrical and splicing experience, and CSTS/OSSA safety training. They must live in or be willing to relocate to Fort McMurray.

  Rope access equipment

• 18d

  Derrick hand

  Estevan, SK

  Full Time

  IW

  Independent Well Servicing Ltd.

  Candidates need prior service rig experience, valid H2S Alive, First Aid and Fall Protection tickets, and a valid driver's licence. A Class 1A or heavy-duty certificate with an air endorsement is preferred.

  service rig, pump unit, derrick

• 18d

  Steel Processing Labourer

  Lively, ON

  $22/hrFull Time

  CI

  Carriere Industrial Supply Limited

  Candidates need crane operation or equivalent hands-on rigging and magnet experience, plus a strong safety mindset. They should be self-motivated, aware of their surroundings, and skilled with hand tools, grinders, torches and electric pallet jacks.

  Crane, Magnets, Rigging equipment, Grinders, Torches, Electric pallet jack

• 18d

  Field Laborer

  Fort St. John, BC

  Full Time

  CH

  Clean Harbors: Clean Harbors is North America’s leading provider of environmental and industrial services.

  Candidates need a full Class 5 driver's licence (no GDL), previous outdoor industrial or oil field labour experience, and the ability to work outdoors in all weather. Experience with vacuum, chemical or high pressure units is preferred.

  vacuum truck, combo truck, high pressure unit, chemical unit, respirator

• 18d

  Endless Rod Unit Assistant Level 1

  Bonnyville, AB

  

  Lifting Solutions Energy Services: Lifting Solutions is a high-performing team that engineers and manufactures artificial lift products and delivers services to optimize oil and gas…

  Candidates need at least grade 12 or equivalent, a valid driver's licence with a clean abstract, and the ability to lift 50 lbs and pass an alcohol and drug test and a physical fitness test. Continuous rod and well servicing experience is preferred.

  Endless Rod Unit, crew vehicle, doghouse, lifting equipment

• 18d

  Electronics Technician (Contract)

  Calgary, AB

  On-siteContract

  

  Precision AI

  Candidates need hands-on experience building harnesses or electronic assemblies, skill with soldering, crimping and basic electronics, and the ability to read schematics. A diploma in electronics technology or equivalent hands-on experience is also required.

  multimeter, soldering iron, crimp tools, oscilloscope

  18d

  Mechanics Technician (Contract)

  Calgary, AB

  On-siteContract

  

  Precision AI

  Candidates need hands-on experience repairing mechanical systems, ideally in agricultural, aerospace, robotics or automotive settings. They should read mechanical drawings, use hand and torque tools, and have a diploma or certificate in mechanical technology or equivalent experience.

  Hand tools, Power tools, Torque tools, 3D printers, Welding equipment, Manual mill

• 18d

  Carpenter Journeyperson

  Come By Chance, NL

  

  Braya Renewable Fuels: Braya Renewable Fuels owns and operates the Come By Chance Refinery, located in Newfoundland and Labrador, and has converted it to renewable fuel…

  Candidates need a Journeyperson or Red Seal carpentry certificate, with apprentices welcome to apply. Experience working at heights and in confined spaces, plus strong communication skills, is required.

  Hand tools, Ladders, Scaffolding, Rigging equipment

  18d

  Scaffolder Journeyperson

  Come By Chance, NL

  

  Braya Renewable Fuels: Braya Renewable Fuels owns and operates the Come By Chance Refinery, located in Newfoundland and Labrador, and has converted it to renewable fuel…

  Candidates need a Journeyperson or Red Seal certificate and experience climbing and erecting scaffold at heights. Apprentices may apply, and Confined Space, Fall Arrest, Powerline Hazard and WHMIS certificates are an advantage.

  scaffolding, hand tools, ladders, rigging equipment

• 19d

  Mechanical Assembler

  Hamilton, ON

  Full Time

  AM

  Avl manufacturing

  2+ YOECandidates need 2-4 years of heavy industrial equipment experience, the ability to read tolerances and drawings, and a valid passport and driver's licence for North American travel. They must supply their own power and hand tools and work well at a fast pace.

  forklift, overhead crane, hand tools, power tools

• 19d

  B-Pressure Welder - TIG

  Calgary, AB

  Full Time

  

  Randstad Canada

  5+ YOERandstad Canada needs a welder holding a valid Alberta Journeyman Welder Trade Certificate and an active B-Pressure Qualification. Strong TIG skills are required, ambidextrous TIG is a priority, and candidates must pass a hands-on weld test.

  overhead crane, forklift, boom lift, rigging gear, TIG welder, MIG welder

• 19d

  Manufacturing Engineer (Nuclear Components)

  Cambridge, ON

  

  BWXT

  5+ YOECandidates need a bachelor's degree in mechanical engineering or a related field and at least 5 years in a fast-paced manufacturing environment. Strong analytical, communication and teamwork skills are required, with CAD and Microsoft Office proficiency.

  AutoCAD, SolidWorks, Microsoft Office

• 19d

  Industrial Millwright / Mechanical Fitter - Adhoc

  St. John's, NL

  On-siteFull Time

  W

  Wood

  Wood needs a journeyperson millwright, Red Seal or equivalent, with four completed apprenticeship periods or 6,240 hours of trade experience. Candidates need offshore certificates such as BST, H2S Alive, WHMIS, Fall Protection and Confined Space Entry, and must pass a drug and alcohol test and CAPP medical.

  Hoists, Jacks, Micrometers, Laser alignment equipment, Engine lathe, Transit and level

17 companies