“compressor packages” jobs in Canada – Page 2

No matching filters. Try another name.

Results

• 3d

  Industrial Maintenance Technician/Millwright MRF

  Edmonton, AB

  On-siteFull Time

  W

  WM

  2+ YOEWM Canada needs candidates with at least 2 years of relevant work experience, who are over 18, legally eligible to work in Canada with a SIN, and able to meet the physical demands of the job and pass a drug screen and physical. Red Seal Millwright or Electrical is preferred.

  forklift, front-end loader, hydraulic power pack, conveyor, baler, compressor

  9d

  Industrial Maintenance Technician/Millwright MRF, Overnight Shift

  Edmonton, AB

  On-siteFull Time

  W

  WM

  2+ YOECandidates need at least 2 years of relevant maintenance experience, a valid SIN and legal eligibility to work in Canada. Physical ability to lift over 50 pounds, work at heights and stand on concrete floors all shift is required, and a Red Seal Millwright or Electrical ticket is preferred.

  forklift, front-end loader, hydraulic power pack, compressor, conveyor belts, electric motors

• 4d

  Cooling Plant Operator

  Edmonton, AB

  On-siteFull Time

  

  University of Alberta

  Candidates need a valid Third Class Power Engineer certificate and thorough knowledge of chilled water production equipment. Training in safety, first aid, CPR, fire extinguishers and WHMIS is preferred, along with basic office software skills.

  DCS, centrifugal chillers, cooling towers, pumps, Google Sheets

• 4d

  Commissioning Operator – Air Separation Unit

  Edmonton, AB

  Contract

  

  Aplin

  3+ YOECandidates need a 4th Class Power Engineer certification and at least 3 to 5 years of hands-on experience operating cryogenic air separation units. Commissioning experience, knowledge of distillation and molecular sieve (TSA) systems, and familiarity with high-pressure oxygen safety are highly preferred.

  Technical support, Troubleshoot, Provide mentorship, Troubleshooting, CSTS, Fall protection

• 4d

  Senior Pump Millwright

  Woodbridge, ON +1

  $35.05–$52.57/hrFull Time

  FC

  Flowserve Canada Incorporate

  7+ YOECandidates need 7 to 10 years of mechanical assembly, repair or industrial maintenance experience, plus a high school diploma or GED. They must read engineering drawings, use precision measuring tools and operate hand, power and lifting equipment safely.

  Micrometers, Dial indicators, Calipers, Hand tools, Power tools, Cranes

• 4d

  Summer Students - Field Based

  Sherwood Park, AB +5

  Full Time

  

  Keyera Corp.

  Candidates need at least one year of post-secondary education, enrollment for fall 2027, and a satisfactory 3-year driver's abstract plus pre-employment testing. They must be safety-minded, detail-oriented, able to communicate clearly and work independently or in a team.

  Microsoft Office, LabVantage, Chromeleon, Compass, Maximo CMMS, lawn mower

• 4d

  Mechanical Assembler

  Nanaimo, BC

  

  VMAC Global Technology Inc.: VMAC (Vehicle Mounted Air Compressors), founded in 1986, is the world-leading manufacturer of truck mounted mobile air compressors, used in a wide…

  1+ YOECandidates need a secondary school diploma, one to three years of experience in a relevant field, and the ability to read detailed assembly drawings. Strong written and verbal English, self-direction, and comfort in a fast-paced environment are also required, and general mechanical knowledge is an asset.

  assembly drawings, inventory system

• 4d

  Sr Mechanical Engineer

  Calgary, AB

  

  TRI Innovations

  8+ YOECandidates need a Bachelor's in Mechanical Engineering and P.Eng. registration with APEGA, plus 8 to 10+ years of EPC experience in industrial, oil and gas or fuel terminal facilities. Strong knowledge of ASME, API, CSA and NFPA codes and piping stress analysis is required.

• 4d

  Maintenance Technician Associate

  Regina, SK

  

  Opta Group

  6+ YOEOpta Group needs candidates with 6 to 10 years of heavy equipment maintenance experience, a high school diploma and technical training. Forklift or Bobcat operation experience is required, and bearings, gearbox and vendor knowledge is needed.

  forklift, Bobcat, compressors, elevators, motors, roll crushers

• 4d

  Maintenance Supervisor

  Mississauga, ON

  

  Metro Supply Chain

  3+ YOE3+ MgmtCandidates need at least 3 years of supervisory experience in maintenance, strong mechanical, electrical, pneumatic and hydraulic troubleshooting skills, and working knowledge of PLC systems and automated packaging equipment. Post-secondary technical training in maintenance or engineering is preferred.

  CMMS, Limble, Smartsheet, PLC, calibration scales, X-ray machines

  4d

  Maintenance Supervisor

  Mississauga, ON

  

  Metro Supply Chain

  3+ YOE3+ MgmtCandidates need at least 3 years of supervisory experience in maintenance, strong mechanical, electrical, pneumatic and hydraulic troubleshooting skills, and working knowledge of PLC systems and automated packaging equipment. Post-secondary technical training in maintenance or engineering is preferred.

  CMMS, Limble, Smartsheet, PLC, calibration scales, X-ray machines

• 5d

  Maintenance Tech - Millwright

  Calgary, AB

  Full Time

  RB

  Refresco Brand

  Refresco needs a millwright journeyperson or a registered 4th year millwright apprentice with strong mechanical knowledge, including power transmission, pneumatics and hydraulics. Candidates should have experience with conveyors, pumps, compressors and packaging machinery, basic computer skills, and the ability to lift heavy loads.

  CMMS, Lathes, Welding equipment, Grinders, High-speed packaging machinery

• 5d

  Hiring T4

  Hamilton, ON

  $40/hrFull Time

  RT

  Ryder Truck Rental Canada Ltd. (Employer-Payroll)

  Candidates need extensive vehicle repair experience, strong mechanical skills, and ideally ASE certifications or Ryder qualifications. Strong written and verbal communication and the ability to work independently and in a team are also required.

  Diagnostic computers, Diagnostic software, Shop Management System, Manifold gauges, Charging and recovery equipment

• 5d

  Millwright Certified

  High Prairie, AB

  Full Time

  

  West Fraser: West Fraser is a diversified wood products company with facilities in Canada, the U.S., the U.K.

  Candidates need a valid Inter-Provincial or Provincial Journeyperson Millwright Certification and strong mechanical and problem-solving skills. Experience in a sawmill, planer maintenance knowledge and a commitment to safe work are assets.

  lifting devices, hydraulic equipment

  5d

  Welder Certified

  Alberta

  Full Time

  

  West Fraser: West Fraser is a diversified wood products company with facilities in Canada, the U.S., the U.K.

  Candidates need a valid Inter-Provincial or Provincial Journeyperson Millwright or Welding certification and the ability to read blueprints and schematics. Strong problem-solving, safety commitment, and independent work skills are required, and sawmill or planer maintenance knowledge is an asset.

  hoisting and lifting devices, hydraulic equipment

  5d

  Millwright Certified

  Slave Lake, AB

  Full Time

  

  West Fraser: West Fraser is a diversified wood products company with facilities in Canada, the U.S., the U.K.

  Candidates need a valid Journeyperson Millwright certification, blueprint reading skills, mechanical aptitude and problem-solving ability. Strong communication, independent work and willingness to work shifts are required, with mill experience preferred.

  Hoisting and lifting devices, PPE

• 5d

  Ceiling Texture Technician, Empire Envelope

  Edmonton, AB

  QD

  Qualico Developments Canada Ltd.: is a real estate company based out of 30 SPEERS RD, Winnipeg, Manitoba, Canada.

  1+ YOECandidates need a high school diploma, at least one year of ceiling texture or similar experience, and knowledge of texture techniques and equipment. They must read blueprints, hold a valid Class 5 driver's licence, pass a criminal record check, and be physically able to work on ladders and overhead, and lift up to 50 lbs.

  spray equipment, compressors, texture application equipment, hand tools, company vehicle

• 8d

  Senior Plant Engineer

  Calgary, AB

  Full Time

  ?

  8+ YOEEnsure ongoing facility regulatory compliance, including environmental reporting, licensing, emissions requirements and other applicable regulatory obligations; Strengthen technical capability and foster a culture of…

  Process engineering, Business process modelling, Troubleshoot, Leadership, Regulatory compliance, Reporting

• 8d

  Senior Mechanical Engineer - Rotating Equipment

  Calgary, AB

  $75–$90/hrFull Time

  K

  Kent

  10+ YOECandidates need a mechanical engineering bachelor's degree, a P.Eng. with APEGA, and 10+ years of rotating equipment experience. Strong knowledge of API, ASME and ISO standards, pump hydraulics, seals and vibration analysis is also required.

  P&ID, datasheets, vibration analysis systems

• 8d

  Diesel Mechanic - 310T or 421A Apprenticeship

  Englehart, ON

  $28.39/hrFull Time

  

  Ontario Northland

  Candidates need a secondary school diploma or GED, to be mechanically inclined, and to hold a valid driver's licence. They must work well in a team, follow safety codes, and be comfortable working outdoors in all weather.

  CNC equipment, micrometers, dynamometer, fuel injection testing equipment, overhead crane, forklift

• 8d

  Senior Project Engineer, Energy

  Calgary, AB

  Full Time

  W

  WSP

  10+ YOECandidates need a relevant engineering degree and P.Eng. registration with APEGA, or eligibility for it. They need 10+ years of energy-industry experience, ideally EPC or consulting, with natural gas facility design knowledge and familiarity with CSA Z662 and ASME B31.3.

  ESRI What if?, Natural gas, Leadership, Decision making, Procurement, P.Eng.

• 8d

  Maintenance Technician

  Strathroy, ON

  

  Groupe Norbec

  5+ YOENorbec needs candidates with a Millwright (433A or 426A) or Tool & Die (430A) certification, or a relevant diploma, and at least 5 years in automated manufacturing. Strong troubleshooting, precision measurement, welding and machining skills, plus teamwork and communication, are essential.

  CMMS, Allen-Bradley RSLogix 5000, lathe, milling machine, welding equipment, micrometer

• 9d

  Facilities Maintainer/Maintenance Technician

  Tiverton, NS

  

  Kinectrics: Kinectrics is an integrated lifecycle management services company providing testing, inspection, certification and engineering consulting for the…

  8+ YOEKinectrics needs candidates with a three-year college program or equivalent training, about 8 years of related experience, and a Red Seal in Electrical, Millwright or Pipefitter trades. They also need industrial or manufacturing repair experience, a nuclear site security clearance, and the ability to work shifts.

  PLC, Microsoft Office, Blueprints, Mechanical drawings

  9d

  Maintenance Technician

  Teeswater, ON

  

  Kinectrics: Kinectrics is an integrated lifecycle management services company providing testing, inspection, certification and engineering consulting for the…

  8+ YOECandidates need a three-year college program or equivalent, about 8 years of related experience, and a Red Seal in Electrical, Millwright or Pipefitter. They also need industrial or manufacturing repair experience, basic PLC knowledge, and the ability to obtain nuclear site security clearance.

  PLC, Microsoft Office, blueprints, mechanical drawings

19 companies