“pipe cutting tools” jobs in Canada – Page 2

No matching filters. Try another name.

Results

• 3d

  Intermediate Piping Designer

  Calgary, AB

  

  Tetra Tech: With 25,000 employees working together, Tetra Tech provides clear solutions to complex problems by Leading with Science® to address the entire water…

  3+ YOECandidates need a diploma or certificate in drafting or engineering design and the ability to read P&IDs. They also need proficiency in 3D modeling platforms such as MicroStation, AutoCAD and Navisworks, plus strong attention to detail.

  MicroStation, AutoCAD, Navisworks, OpenPlant, PDS, PDMS

  3d

  Senior Piping Designer

  Vancouver, BC

  

  Tetra Tech: With 25,000 employees working together, Tetra Tech provides clear solutions to complex problems by Leading with Science® to address the entire water…

  10+ YOETetra Tech needs candidates with a drafting or engineering design diploma or certificate and 10 to 15 years of design experience. Candidates must read P&IDs, understand construction and maintenance needs, and work proficiently in 3D modeling platforms such as MicroStation, AutoCAD and Navisworks.

  MicroStation, AutoCAD, Navisworks, PDS, PDMS, AVEVA

  3d

  Lead Mechanical CAD Designer

  Thunder Bay, ON

  

  Tetra Tech: With 25,000 employees working together, Tetra Tech provides clear solutions to complex problems by Leading with Science® to address the entire water…

  15+ YOECandidates need a diploma in mechanical design or equivalent experience, at least 15 years of progressive heavy industrial plant design, and strong AutoCAD and 3D modelling skills. Mining experience, operational or construction experience, and willingness to travel periodically are also sought.

  AutoCAD, 3D modelling software

  3d

  Senior Mechanical Engineer

  Winnipeg, MB

  

  Tetra Tech: With 25,000 employees working together, Tetra Tech provides clear solutions to complex problems by Leading with Science® to address the entire water…

  10+ YOECandidates need a mechanical engineering degree, Professional Engineer status in Manitoba or eligibility for it, and at least 10 years of design experience, with consulting experience considered critical. Federal security clearance eligibility and a valid driver's licence are also required.

  MS Word, MS Excel, MS PowerPoint, mechanical design software

• 3d

  Boiler Mechanic

  Vancouver, BC

  $50.46/hrFull Time

  JC

  Johnson Controls LP CAN

  Johnson Controls needs candidates with pipe fitting or steam fitting experience, knowledge of boilers over 400,000 BTU and a valid Gas B ticket. A class 5 driver's licence, union membership or eligibility for Local 170, and good communication and customer service skills are also required.

  pressure gauges, welding equipment, soldering and brazing equipment, blueprints

• 3d

  Construction Miner

  Saskatoon, SK

  Full Time

  SM

  SGO Mining Inc.

  1+ YOECandidates need one year of underground experience and construction experience, preferably underground. SSR Mining also looks for a strong work ethic, good communication and a proactive attitude toward safety.

  Victaulic pipe tools

• 4d

  Welders (Field) -Kidd #2 LO Bin Project

  Canada

  $60–$70/hrContract

  

  Dumas: Dumas is part of STRACON Group, a leading provider of specialty mining services throughout North, Central, and South America.

  2+ YOECandidates need a valid CWB welding certification or equivalent trade qualification and at least 2 years of industrial, construction or mining welding experience. Ability to read welding drawings and specifications is required, and mining experience is preferred.

  welding equipment

  4d

  Welders (Field) -Kidd #2 LO Bin Project

  Canada

  $60–$70/hrContract

  

  Dumas: Dumas is part of STRACON Group, a leading provider of specialty mining services throughout North, Central, and South America.

  2+ YOECandidates need a valid CWB welding certification or equivalent trade qualification and at least 2 years of industrial, construction or mining welding experience. Experience in mining or industrial sites, the ability to read welding drawings and a strong commitment to safety are also expected.

  welding equipment, cutting equipment

• 4d

  Millwright Mechanic

  Canada

  $37–$46/hrFull Time

  

  Home Hardware Stores Limited: Home Hardware has been a proud Canadian company since 1964.

  1+ YOECandidates need a valid Ontario industrial millwright licence, a college diploma or trade certificate, and 1 to 2 years of millwright experience. They also need strong troubleshooting skills, blueprint reading, and hands-on use of power tools, welding and machine shop equipment.

  air and electrical power tools, welding torches, milling machines, lathes, drill presses, band saws

• 4d

  Production Norms Engineering Student/Co-op- Winter 2027

  Halifax, NS

  Full Time

  

  JDI

  Candidates need to be currently enrolled in a 4-year engineering degree with 0-2 years of experience. They need a general awareness of shipyard disciplines, strong communication and problem-solving skills, Microsoft Office proficiency, and the ability to read blueprints and navigate a 3D ship model. Security clearances are required.

  AutoCAD, Microsoft Office

• 4d

  Miner - Canadian Royalties Inc.

  Quebec

  Full Time

  

  The Redpath Group: Established in 1962, The Redpath Group is an experienced, full-service solutions provider to the global underground mining industry.

  2+ YOECandidates need FMTM or Ontario Underground Hard Rock Mining Common Core training, a General Explosives Permit, a valid driver's licence, and at least 2 years of mining experience. A high school diploma is preferred, along with the ability to read mine plans, work as part of a team, and follow written and verbal instructions.

  LHD, scoop tram, scissor lift, pneumatic drill, drill boom, shotcrete sprayer

  7d

  Service Miners - Eastwood Development

  Rouyn-Noranda, QC

  On-site

  

  The Redpath Group: Established in 1962, The Redpath Group is an experienced, full-service solutions provider to the global underground mining industry.

  2+ YOECandidates need at least 2 years of mining experience, underground hard rock mining certification (FMTM or Ontario Common Core), a valid driver's licence, and a General Explosives Permit. Ability to read mine plans and work in hot environments is required.

  LHD, 8 yard Cat scoop, scissor truck, scaling bar, pneumatic drill, mechanized bolter

• 6d

  Journeyperson Plumber

  Calgary, AB

  $44.25/hr

  SR

  Sphere Recruitment Solutions

  Candidates need a valid Journeyperson Plumbing Certificate or Red Seal, a current CSTS certificate, and commercial or industrial plumbing experience (preferred). Strong blueprint reading, code knowledge and physical stamina are required.

  hand tools, power tools, scissor lift

• 6d

  TIG Welder / Fabricator

  Brampton, ON

  On-siteFull Time

  

  Senior plc: The Senior Company is a dual accredited private duty home care company, providing both skilled and non skilled services.

  3+ YOESenior Flexonics Canada needs candidates with at least three years of TIG welding experience, ideally on thin-wall stainless steel, plus blueprint reading, measuring and pipe fitting skills. Candidates must pass a skills test and speak and write fluent English.

  TIG torch, filler rods, rotary tools, turn tables, measuring tapes, weld jigs

• 6d

  Journeyperson HVAC Technician

  Calgary, AB

  Full Time

  

  Trotter & Morton

  5+ YOETrotter & Morton asks for a Red Seal or trade certification and at least 5 years as a journeyman. Candidates need strong safety training, careful attention to detail, time management and a clean driver's licence. Chiller and cooling tower experience is an asset.

  hand tools, power tools, welding and brazing equipment, testing devices

• 7d

  Pipefitter (Site Based)

  Saskatoon, SK

  Full Time

  

  Fortis Mining Engineering & Manufacturing: With an extensive portfolio of capabilities in engineering, machining, and fabrication, Fortis specializes in rapid mobilization.

  Candidates need an apprenticeship level or Red Seal Journeyperson certification, plus experience cutting, fitting and inspecting pipe. They must be physically fit, able to lift up to 50 pounds, work safely and with precision, and work both alone and in a team.

  pipe fitting tools, pipe threading equipment, forklift

  7d

  Pipefitter (Site Based)

  Saskatoon, SK

  Full Time

  

  Fortis Mining Engineering & Manufacturing: With an extensive portfolio of capabilities in engineering, machining, and fabrication, Fortis specializes in rapid mobilization.

  Candidates need an apprenticeship level or Red Seal Journeyperson certification, plus experience cutting, fitting and inspecting pipe. They must be physically fit, able to lift up to 50 pounds, work safely and with precision, and work both alone and in a team.

  pipe fitting tools, pipe threading equipment, forklift

• 7d

  Assembler

  Guelph, ON

  $20–$26.50/hrFull Time

  LN

  Linamar - New

  1+ YOELinamar needs candidates with one year of training or experience, mechanical aptitude, and the ability to read assembly and schematic drawings and take precise measurements. Strong problem-solving, communication and teamwork skills and knowledge of health and safety regulations are also required.

  SolidWorks, AutoCAD, Hand tools, Power tools, Measuring devices, Lifting devices

• 7d

  Pipefitter | Steamfitter

  Delta, BC

  $47.12–$50.07/hrFull Time

  

  Randstad Canada

  Candidates need a Grade 12 education, a journeyman qualification (Red Seal is an asset), and the ability to read blueprints and P&IDs. They also need a BC Class 5 driver's licence and their own hand tools.

  pipe threading machine, power beveler, band saw, hydraulic cutter, torque wrench

  7d

  Machine operator

  Edmonton, AB

  $25/hrContract

  

  Randstad Canada

  Candidates need hands-on experience setting up or running CNC machinery in a shop, a strong eye for quality control, and practical skill with calipers, micrometers and gauges. They must be ready to work onsite in Nisku, AB.

  CNC machinery, Micrometers, Calipers, Precision gauges

  7d

  B-Pressure Welder

  Nisku, AB

  $45/hrContract

  

  Randstad Canada

  3+ YOECandidates need an Alberta Journeyperson Welder ticket, an active Alberta B-Pressure certification, and 3+ years of pipe fabrication experience. They need strong SMAW, GMAW and MCAW skills, and must be able to pass a 6" Schedule 80 6G coupon test.

  Welding hood, Hand tools

• 7d

  Truck Driver II - Sewer Operations (AUX)

  Vancouver, BC

  $37.45/hr

  

  City of Vancouver

  Candidates need Grade 8 education and considerable experience operating large trucks and auxiliary equipment, plus a valid Class 3 BC licence with air brakes. Load securement training is required, and traffic control and WHMIS training are preferred.

  dump truck, flat deck, hydraulic crane, mobile crane, jackhammer, Hilti drill

• 7d

  Labourer

  Ontario

  IC

  Impala Canada Ltd.

  Candidates need a valid G or G2 driver's licence and the ability to work outdoors in all conditions and through long periods of manual labour. Verbal and written English is required, and experience with power tools, chainsaws, water pumps and gen-sets is an asset.

  Power tools, Chainsaw, Water pump, Gen-set, HDPE fusing equipment

• 7d

  Raisebore Welders

  Ontario

  Full Time

  DB

  Default Brand

  Thyssen Mining needs candidates with a valid CWB Welder Certification and experience butt welding carbon-steel pressure piping. Candidates should be able to read drawings and welding symbols and work safely in confined, underground conditions.

  Welding equipment, Grinders, Pipe cutting tools

16 companies