“Electrical code specifications” jobs in Canada – Page 42

No matching filters. Try another name.

Results

• 21d

  Project Manager

  Ontario

  T

  TalentSphere

  5+ YOECandidates need about 5 years of progressive construction project management with an Ontario general contractor, ideally on institutional projects of $20M to $100M+. An engineering, architecture or construction management degree or diploma is required, along with strong knowledge of drawings, RFIs, submittals and change management.

  Procurement, Documentation, Change management, Financial reporting, Ensure compliance with construction project deadline, Construction management

  21d

  Senior Electrical Design Engineer

  Kitchener, ON

  T

  TalentSphere

  3+ YOECandidates need 3 to 6 years of mechanical design experience in building consulting, a diploma or degree in mechanical engineering or a related field, and skills in AutoCAD and Revit. Knowledge of building codes and standards such as OBC and ASHRAE is expected.

  AutoCAD, Revit

  21d

  Fire Protection Engineer - Electrical (P.Eng), Relocation Assistance Available

  Toronto, ON

  T

  TalentSphere

  5+ YOECandidates need a Bachelor's in Electrical Engineering, a P.Eng. designation and at least 5 years of fire protection or life safety consulting experience. Strong knowledge of the OBC, OFC, NBCC, NFPA and ULC standards is required.

  P.Eng., Alarm systems, Safety engineering, Regulatory compliance, Documentation, Inspection

  21d

  Site Superintendent

  Calgary, AB

  T

  TalentSphere

  5+ YOECandidates need at least 5 years of construction experience, ideally commercial, with full-cycle experience from excavation to occupancy. They also need leadership and scheduling skills, knowledge of building codes and safety rules, and certifications in First Aid/CPR, WHMIS and an OHS certificate.

  MS Project, Bluebeam, MS Word, Outlook, Electronic Document Management System

• 21d

  Senior Substation Engineer

  Calgary, AB

  SR

  Sphere Recruitment Solutions

  6+ YOECandidates need a Bachelor's degree in Electrical Engineering, eligibility to register as a Professional Engineer in a Canadian province, and 6 to 10 years of substation design experience. Strong communication, attention to detail and analytical problem-solving are also required.

  CYMCAP

  21d

  Electrical Distribution Designer/Engineer

  Calgary, AB

  SR

  Sphere Recruitment Solutions

  3+ YOECandidates need a bachelor's degree in electrical engineering, P.Eng designation or APEGA eligibility, and 3+ years in electrical distribution design. Familiarity with CSA codes and utility standards and strong communication and problem-solving skills are also needed.

  CYME, Milsoft, AutoCAD, PLS-CADD

  21d

  Substation Engineer

  Calgary, AB

  SR

  Sphere Recruitment Solutions

  2+ YOECandidates need an electrical engineering bachelor's degree and eligibility for E.I.T. or P.Eng registration in a Canadian province. They also need 2 to 5 years of substation design or related work, plus strong communication and attention to detail.

  Design process, Design package, Documentation, Regulatory compliance, Electrical engineering, EIT

• 21d

  QC Electrical Inspector

  Regina, SK

  Full Time

  

  Bird Construction Inc.: Bird is a Canadian construction and maintenance company providing a comprehensive scope offering and a diversified portfolio of services to…

  Candidates need experience in electrical quality inspection, knowledge of drawings, codes and standards, and skill with digital quality records. The posting names Procore and other digital quality management tools.

  Procore

• 21d

  Fire Alarm Inspector

  Brampton, ON

  $23.55–$32.21/hrFull Time

  TT

  TIF Tyco Integrated Fire & Security Canada, Inc.

  2+ YOECandidates need CFAA certification or the theory exam done, plus experience reading blueprints and diagrams and working with hand tools and multimeters. They must be able to climb ladders and work in tight spaces, hold a full G licence with a clean record, and pass a criminal background check.

  Hand tools, Laptop computer, MS Excel, MS Word, iPhone apps, Ladders

• 21d

  Co-op Students – Engineering Projects Department

  British Columbia

  Internship

  

  Vancouver International Airport Authority

  Candidates need to be students in a civil, electrical, mechanical or integrated engineering program, with the ability to learn construction drawings quickly. Strong written and oral communication, multitasking and independent work are required, along with a clean criminal record and Canadian residence for security clearance.

  Inspection, Multitask, Communication skills, Work independently

• 21d

  Sheet Metal Technician

  Edmonton, AB

  $40–$42/hrFull Time

  

  EDL Building Solutions

  Candidates need a Sheet Metal Journeyman certificate and existing experience or comfort in commercial HVAC, plumbing or electrical work. A valid driver's licence with a clean abstract, strong teamwork skills and a safety focus are also required.

  sheet metal tools

• 21d

  Fixed Plant Maintenance Planner

  Vancouver, BC +4

  Full Time

  

  SKEENA GOLD + SILVER: Skeena is a Canadian mining exploration and development company focused on revitalizing the Eskay Creek and Snip Projects, two past-producing mines…

  5+ YOECandidates need at least 5 years of fixed plant maintenance experience in mining or heavy industry, including planning or scheduling. They need knowledge of mechanical and electrical/instrumentation work, CMMS software, and reading drawings. A Class 5 driver's licence is required.

  CMMS, P&ID, single-line diagram, PLC, DCS

• 21d

  Senior Electrical Engineer

  Toronto, ON

  $105k–$140k/yr

  N

  NORR

  10+ YOECandidates need a post-secondary engineering education, professional engineering registration, and 10+ years of project experience. They must know building electrical systems, building codes and architectural design, and be skilled in AutoCAD, Revit MEP and electrical design software.

  AutoCAD, Revit MEP

• 21d

  Electrician Lead hand

  Calgary, AB

  On-siteFull Time

  

  Ice Western: ICE has been a HVAC manufacturer with two facilities in Canada with one in Winnipeg (since 1961) and Calgary (since 1991) and one in the USA,…

  5+ YOECandidates need a Red Seal Journeyman Electrician certification, previous lead hand experience and at least 5 years of electrical experience in Alberta. HVAC experience, rigid conduit installation and strong reading of electrical prints are listed as assets or requirements.

  ICE, Process improvement, Teamwork, HVAC, Technical support, Troubleshoot

• 21d

  Part-Time Class 1 Driver

  Canada

  $31.26/hrPart Time

  PV

  Pet Valu Canada Inc. (Company)

  Candidates need a valid AZ/DZ licence with a clean driving record and commercial vehicle experience with lift gates and pallet jacks. They must understand safety and inspection procedures, be physically able to lift and move goods, and work in winter weather.

  lift gate, pallet jack, electric pallet jack, pylons, wheel chocks

• 21d

  QC Electrical Inspector

  Regina, SK

  Full Time

  SO

  Stuart Olson Industrial Services Ltd.

  Candidates need experience in electrical quality inspection, knowledge of drawings, codes and standards, and the ability to write and follow Inspection and Test Plans. Comfort with document review, traceability and digital quality platforms is expected.

  Procore

• 21d

  Electrical Superintendent

  Toronto, ON +2

  On-siteFull Time

  

  North America Construction (1993) Ltd. - NAC Constructors Ltd.: provides true Master Builder services to the municipal, civil, biofuel and energy marketplace.

  5+ YOE5+ MgmtCandidates need electrical trade certification and 5 or more years as an electrical superintendent on heavy construction projects, ideally water or wastewater plants. Valid WHMIS, aerial work platform and fall arrest certificates are required.

  Microsoft Word, Microsoft Excel, Microsoft Outlook

• 21d

  Site Cost Controller (Contractor)

  Saskatoon, SK

  On-siteContract

  

  Giffen Consulting: Giffen Consulting is a Canadian company that provides fit-for-purpose engineering and project delivery solutions with a focus on the mining,…

  3+ YOECandidates need a relevant engineering or project management degree or diploma and 3-5 years of cost control experience on multidiscipline projects. Strong budgeting, forecasting, estimating and MS Office skills are required.

  MS Office

• 21d

  Mechanical Engineer Prairie (58941)

  Grande Pointe, MB

  RemoteFull Time

  

  Industrial Refrigeration Pros

  Candidates need a bachelor's degree in mechanical engineering and proven experience with industrial refrigeration design, ideally ammonia or CO2. They must read P&IDs and mechanical drawings, use AutoCAD, and communicate clearly while managing several projects.

  AutoCAD

• 21d

  Automation Engineer

  Cambridge, ON

  Full Time

  

  PSL

  5+ YOECandidates need at least 5 years of industrial automation and control experience in power generation, steam, oil and gas or petrochemical work. They need an engineering degree or diploma, PLC and DCS programming skills, and experience with control documentation and acceptance testing.

  PLC, DCS, P&ID, HMI

• 21d

  Manager, Facilities Maintenance (Electrical Portfolio)

  Vancouver, BC

  Full Time

  SD

  School District #39 (Vancouver)

  Candidates need senior facilities or electrical maintenance leadership experience, deep knowledge of the BC Electrical Code, WorkSafeBC and Technical Safety BC requirements, and strong budgeting, procurement and contract management skills. Supervisory experience and union collaboration skills are expected.

  Leadership, HVAC, Regulatory compliance, Risk management, Ventilation systems, Emergency response

• 21d

  1.0 FTE Permanent Maintenance Working Foreman

  Manitouwadge, ON

  Full Time

  

  Superior-Greenstone District School Board

  Candidates need a valid Ontario driver's licence (minimum Class G), the physical ability to do the job, and a trade certificate in HVAC, electrical or carpentry, or a college diploma in a trade. Regular attendance at work is also required.

  Preventive maintenance, Regulatory compliance, Valid driver's licence, HVAC, Journeyperson, Carpentry

• 21d

  25CUPE81 - HVAC Mechanic - Various Locations - REPOST

  Guelph, ON

  $39.12–$42.91/hrFull Time

  

  Upper Grand District School Board

  Candidates need a valid Ontario Certificate of Qualification as a Refrigeration and Air Conditioning Systems Mechanic (313A), a Gas Fitter 1 licence and an Ozone Depletion Prevention card. A valid Ontario driver's licence and a reliable vehicle are also required.

  Building Automation Systems, electronic and pneumatic testing equipment, welding equipment, computerized work order system

• 21d

  HVAC Technician

  Richmond, BC

  Full Time

  SD

  School District #38 (Richmond)

  2+ YOECandidates need Grade 12 or equivalent, a BC or Interprovincial Certificate of Qualification in plumbing, steamfitting or refrigeration, and a Class B gas licence with electrical endorsement. They also need two years of journeyman-level commercial HVAC experience, knowledge of computerized controls, and a valid Class 5 driver's licence.

  HVAC equipment, gas fitting tools, District vehicle

19 companies