“servos” jobs in Canada – Page 9

No matching filters. Try another name.

Results

• 1mo

  Flight Controls Hydro-Mechanical Equipment Professional / Intégrateur Équipements Commandes de Vol

  Montréal, QC

  Full Time

  AC

  Airbus Canada Limited Partnership

  5+ YOEBaccalauréat ou maîtrise en génie mécanique ou aéronautique; Au moins 5 ans d'expérience pertinente; Connaissance de RTCA DO-160 et des requis de certification (FAA, EASA Part 25, TCCA)

  CATIA, ENOVIA, Matlab, Iron Bird

• 1mo

  Test Engineer

  Markham, ON

  Full Time

  

  Multimatic Technical Centre

  1+ YOECandidates need a relevant engineering degree or diploma, 1-3 years of automotive testing experience (co-op or internship accepted), and a solid understanding of automotive systems and test methods. Strong communication and organization skills are also needed.

  DAQ systems, MATLAB, LabVIEW, Siemens Testlab, NI DIAdem, MTS MPT

• 1mo

  Senior Instrumentation Control and Electrical Engineer

  Mississauga, ON

  Full Time

  CE

  Candu Energy Inc.

  8+ YOECandidates need a bachelor's degree in an electrical, controls, instrumentation, software, mechatronics or computer engineering field, plus at least 8 years of relevant experience. Strong hands-on skills with Siemens PLCs, SCADA/HMI, LabVIEW and industrial networks are required.

  Siemens TIA Portal, Step 7, WinCC, LabVIEW, National Instruments hardware, PROFINET

  1mo

  Intermediate Instrumentation Control and Electrical Engineer

  Mississauga, ON

  Full Time

  CE

  Candu Energy Inc.

  4+ YOECandidates need a bachelor's degree in an engineering discipline and at least 4 years of relevant experience in controls, automation or electrical work. Siemens PLC, HMI/SCADA and LabVIEW skills, plus commissioning and field experience, are strongly preferred.

  Siemens TIA Portal, Step 7, WinCC, LabVIEW, National Instruments hardware, Microsoft Visio

• 1mo

  Electrician

  Rexdale, ON

  Full Time

  C4

  CAN_ORB_ 4975 ORBIS Canada Limited

  Candidates need a licensed electrician credential (442A, or 309A is acceptable) and experience with machine control programming and multiple drive applications. Hands-on knowledge of PLCs, robotics, hydraulics and pneumatics is expected.

  PLC, robot HMI, vision systems, measuring and testing equipment, asset management system

• 1mo

  Automation Engineer - Controls & Automation

  Calgary, AB

  Full Time

  CC

  (CAN) CoolIT Systems Inc.

  Candidates need a bachelor's degree in an engineering or automation field and hands-on experience with PLCs, HMIs, servo motion and industrial robots. They must have delivered automated machinery from design through commissioning, and be legally authorized to work in Canada without sponsorship.

  PLC, HMI, servo drives, industrial robots, collaborative robots, SCADA

• 1mo

  Technician, Robotics

  Brampton, ON

  Full Time

  

  Magna International Inc.

  5+ YOECandidates need at least five years of hands-on robot programming, with Fanuc experience essential, plus knowledge of Fanuc DCS and Karel, electrical circuitry, and robot safety standards such as CSA Z434. A mechatronics, automation or robotics diploma or certificate is also required.

  Fanuc robots, Fanuc Roboguide, Fanuc DCS, Kuka, Motoman, AutoCAD

• 1mo

  Automation/Controls Supervisor

  Concord, ON

  $95k–$128k/yrFull Time

  

  Magna Exteriors Inc.

  5+ YOE2+ MgmtCandidates need a bachelor's degree in an engineering or mechatronics field, or equivalent experience, plus 5+ years in industrial automation with at least 2 years supervising. Strong PLC, HMI, robot programming and industrial networking skills are required, along with lean and continuous improvement knowledge.

  PLC, HMI, SCADA, Vision systems, Ethernet/IP, Profinet

• 1mo

  Research Assistant II

  Waterloo, ON

  Full Time

  

  University of Waterloo: In a complex and rapidly evolving world, WatSPEED at the University of Waterloo is professional education that’s designed to be different.

  1+ YOECandidates need a BSc (an MSc is preferred), ideally in chemistry, analytical chemistry or biochemistry. Required skills include LC-MS work with Agilent MassHunter, intermediate computer skills in Word and Excel, and a full G driver's licence.

  LC-MS/MS

  1mo

  Technician, Structures and Materials

  Waterloo, ON

  Full Time

  

  University of Waterloo: In a complex and rapidly evolving world, WatSPEED at the University of Waterloo is professional education that’s designed to be different.

  Candidates need a diploma, apprenticeship or equivalent experience in civil, mechanical, manufacturing or a related technical field. Several years of hands-on lab or fabrication experience, a valid G driver's licence and strong computer skills are required.

  servo-hydraulic systems, data acquisition systems, hand tools, power tools, welding equipment, machine shop equipment

• 1mo

  Maintenance Mechanic / Millwright (Night Shift)

  Toronto, ON

  Full Time

  KN

  Knoll North America Corp.

  5+ YOECandidates need a Secondary School Diploma and a licensed Millwright certification for Ontario, plus at least five years of manufacturing or machine shop experience. Strong electrical, electronic control, pneumatic and hydraulic knowledge, plus the ability to read blueprints and OEM manuals, are required.

  CNC machines, OEM manuals, blueprints

• 1mo

  Electrical Controls Technician II

  Calgary, AB

  On-siteFull Time

  MC

  MiTek Canada Inc

  4+ YOECandidates need 4+ years of electrical controls experience, with PLCs, motor controllers, VFDs and servos. AutoCAD Electrical or Eplan skills are an asset, and an associate's degree in electrical or electronics engineering is preferred.

  AutoCAD Electrical, Eplan Electrical, PLC, VFD, servo drive, Microsoft Office

• 1mo

  Electrician - AGC

  Mississauga, ON

  $43.75–$47.24/hrFull Time

  F

  FPS-Services

  5+ YOECandidates need a Certificate of Qualification as an Electrician (442A or 309A) or equivalent, plus 5+ years in industrial electrical or automation work. Strong schematic reading, PLC, VFD and industrial network skills are required.

  PLC, VFD, pneumatic systems, vision systems

  1mo

  442A Electrician - AGC

  Stratford, ON

  $42.21–$45.16/hrFull Time

  F

  FPS-Services

  3+ YOECandidates need an Electrician Certificate of Qualification (442A or 309A) or equivalent experience, plus 3 to 5 years in industrial electrical or automation work. Strong knowledge of schematics, PLCs, VFDs, servo systems and industrial networks is required.

  PLC, VFD, pneumatic systems, vision systems

• 1mo

  PLC Specialist

  Stratford, ON

  $62k–$80k/yrFull Time

  P

  PM-Stratford

  5+ YOECandidates need a university degree in electrical engineering or a college diploma, plus 5+ years of controls and robot experience in manufacturing. Strong knowledge of Studio 5000, RSLogix, TIA Portal and Step 7 is required, with leadership and team-lead ability.

  Studio 5000, RSLogix, TIA Portal, Step 7, Cognex cameras, AutoCAD

• 1mo

  Electrical Engineer

  Oakville, ON

  HybridFull Time

  PM

  Pro Mach Integrated Solutions Canada Inc

  7+ YOECandidates need 7+ years of electrical or controls engineering experience with strong programming skills and a bachelor's degree in electrical engineering or equivalent. Experience with PLCs (Allen Bradley or Siemens), AutoCAD, industrial networks, and North American electrical standards is required.

  AutoCAD, Allen Bradley, Siemens PLC, FactoryTalk

  1mo

  Controls Engineer

  Oakville, ON

  HybridFull Time

  PM

  Pro Mach Integrated Solutions Canada Inc

  5+ YOEPro Mach Integrated Solutions Canada Inc needs candidates with 5+ years of controls engineering experience and a bachelor's degree in an engineering discipline. They need strong PLC programming skills in Allen-Bradley or Siemens, HMI experience, and commissioning experience.

  Allen-Bradley PLC, Siemens PLC, FactoryTalk, Ignition, WinCC, AutoCAD Electrical

• 1mo

  Embedded Software Engineer

  Mississauga, ON

  Full Time

  II

  ITI Indal Technologies Inc

  1+ YOECandidates need a bachelor's degree in software engineering or a related field and 1 to 3+ years of software development experience. Strong skills in C, C++, Java or Python, real-time operating systems such as VxWorks and Linux, and good communication are required.

  VxWorks, Linux, Version control systems, Software debugging tools, VHDL, FPGA

• 1mo

  Manufacturing Engineer

  Windsor, ON

  Full Time

  ZC

  ZF Chassis Modules (Windsor) Inc.

  Candidates need an engineering bachelor's degree, knowledge of SPC and control charts, and a strong background in PLCs, robotics and error-proofing. Familiarity with IATF 16949 and OHSA standards, good communication skills and Microsoft Office are also needed.

  Allen-Bradley PLC, Siemens PLC, Fanuc robots, Atlas Copco tools, Vision systems, Barcode readers

  1mo

  Manufacturing Engineer (Controls)

  Windsor, ON

  Full Time

  ZC

  ZF Chassis Modules (Windsor) Inc.

  Candidates need a college diploma (degree preferred) and a strong background in PLCs, robotics and problem-solving. They should be comfortable with factory conditions, PPE and multidisciplinary projects.

  Allen-Bradley PLC, Siemens PLC, Fanuc robot, Atlas Copco tools, barcode reader, AutoCAD

  1mo

  Manufacturing Engineering

  Windsor, ON

  Full Time

  ZC

  ZF Chassis Modules (Windsor) Inc.

  3+ YOEZF Chassis Modules needs candidates with at least 3 years of experience and strong PLC and robotics programming skills, especially Allen-Bradley, Siemens and FANUC. A bachelor's degree in Electrical Engineering is preferred, along with knowledge of OHSA, TS 16949 and IATF 16949.

  Allen-Bradley PLC, Siemens PLC, FANUC robots, Cognex vision systems, Banner vision systems, Atlas Copco tools

• 1mo

  Outside Sales Account Manager - Industrial Service and Repair Sales

  Windsor, ON +1

  Remote

  

  SunSource: With over 250 locations and 3,500+ employees, SunSource is the leading value-added industrial distributor and solutions provider for North America’s…

  2+ YOECandidates need a high school diploma, at least 2 years of industrial sales experience (industrial repair services preferred), and strong communication and relationship skills. A valid driver's license and computer proficiency with Microsoft Office and a CRM system are required.

  CRM system, Microsoft Office

• 1mo

  Electrotechnicien.ne

  Waterville, QC

  On-siteFull Time

  

  Go RH

  DEC en génie électrique ou DEP en électricité ou électronique industrielle; Expérience niveau III, environ 3000 heures; Connaissances en PLC Allen-Bradley et Omron

  Omron, variateurs de vitesse, servo, Fanuc, Motoman

• 1mo

  Concepteur(trice) électrique / Electrical Designer

  Laval, QC

  HybridFull Time

  

  Systemex

  7+ YOEBaccalauréat en génie électrique et 7-10 ans d'expérience; Membre de l'OIQ; Excellente maîtrise d'EPLAN et connaissances des PLC, VFD et réseaux industriels

  EPLAN, Allen-Bradley PLC, Siemens PLC, VFD, servo drives

18 companies