“AS9100” jobs in Canada

No matching filters. Try another name.

Results

• 16d

  Aerospace Auditor (AS9100)

  Toronto, ON

  BS

  British Stds Institution

  Candidates need IAQG Lead Auditor status and AA or AEA status at the time of application. Experience conducting third-party AS9100 management system audits is expected.

  Documentation, Confidentiality

  29d

  Aerospace Auditor (AS9100)

  Toronto, ON

  BS

  British Stds Institution

  Candidates need IAQG Lead Auditor status and AA or AEA standing at the time of application. Experienced auditing of aerospace management systems is expected.

  Documentation, Confidentiality

• 14h

  Environmental Health & Safety Specialist (Hybrid)

  Burnaby, BC

  

  Kardium Inc.

  5+ YOECandidates need a diploma or degree in occupational health and safety, or an engineering or science degree, plus at least 5 years of health and safety management in manufacturing. Advanced knowledge of OHS regulations and CSA, ANSI and NIOSH standards is required, along with ISO 13485 or AS9100 experience.

  HAZOP, chemical management system

• 15h

  Procurement Specialist

  Ottawa, ON

  On-siteFull Time

  M

  MMIST

  Candidates need strong procurement or strategic sourcing experience in a manufacturing or engineering setting, plus negotiation, contract management and ERP skills. Supply chain metrics experience and a relevant certification such as APICS or CIPS are assets.

  Vantage, SAP, Oracle, NetSuite

• 1d

  Quality Assurance Inspector

  Ottawa, ON

  $28–$35/hrContract

  

  Hays

  5+ YOECandidates need at least 5 years of quality inspection experience in machining, manufacturing, aerospace or fabrication. They must read engineering drawings, use precision measuring tools, understand GD&T, and be eligible for a Controlled Goods Program screening.

  calipers, micrometers, gauges, CMM

• 1d

  Assessor - Aerospace

  Ottawa, ON

  

  Standards Council of Canada | Conseil canadien des normes

  2+ YOECandidates need at least two years of aerospace management systems certification experience, understanding of AS9100, ISO 9001 and the ICOP scheme, and strong auditing, communication and computer skills. Canadian citizenship, permanent residency or a work visa for the contract is essential.

  Microsoft Office, Web-based communications software, IAQG OASIS

• 2d

  Quality Control Inspector (Afternoon Shift)

  Waterdown, ON

  $31.73–$41/hr

  

  L3Harris Technologies

  6+ YOECandidates need six years of relevant experience with a high school diploma, or two years of post-secondary study plus two years of related experience. They need working knowledge of AS9100 and ISO9001, experience in process quality control and product testing, and skill with MES, ERP LN, Teamcenter and Microsoft Office. CQE or CQT certification is preferred.

  MES, ERP LN, Teamcenter, Microsoft Office, SharePoint, Microsoft Access

  4d

  CNC Optical Technician (Weekend Shift)

  Toronto, ON

  $27–$29/hr

  

  L3Harris Technologies

  Candidates need a high school diploma or equivalent with 0 to 3 years of related experience, or a diploma in Photonics or Mechanical Engineering Technology. They must read optical and mechanical drawings, operate precision CNC optics equipment, and be eligible for the Controlled Goods Program of Canada.

  CNC optics machine, diamond turning machine

• 2d

  Inventory and Logistics Manager

  Ottawa, ON

  $91k–$122k/yrFull Time

  

  Redwire Defense Tech: Redwire Corporation (NYSE:RDW) is an integrated aerospace and defense company focused on advanced technologies.

  5+ YOECandidates need 5 to 10 years in inventory, materials, logistics or supply chain, with ERP/MRP experience and kitting knowledge. Redwire Defense Tech also requires experience with export controls such as the Controlled Goods Program and NEXCOL, plus Lean or Six Sigma experience.

  Odoo, Jamis, ERP system, MRP system, Microsoft Office

• 2d

  Electronics Repair Technician

  Calgary, AB

  Full Time

  ?

  Ensure repaired equipment meets airworthiness, quality, reliability, and customer requirements before release; Support compliance with ISO 9001, AS9100, IPC workmanship standards, and other applicable quality…

  Troubleshooting, Documentation, Inspection, Regulatory compliance, Troubleshoot, Electronics

• 2d

  Quality Inspector

  Kanata, ON

  $22–$24/hrOn-siteFull Time

  

  Syntronic

  2+ YOECandidates need valid IPC-A 610 certification, at least 2 years of quality, manufacturing or engineering experience, and knowledge of quality tools and audits. Proficiency in Microsoft Excel and Word and strong problem-solving skills are also required.

  Microsoft Excel, Microsoft Word

• 3d

  Master Scheduler (6462)

  Ontario

  Full Time

  

  AXIUS GROUP LLC

  3+ YOEAXIUS GROUP LLC needs candidates with at least three years of master scheduling experience in an ERP environment within aerospace, automotive or heavy equipment manufacturing, plus related supervisory experience. Candidates need a production planning or manufacturing certificate or degree (or equivalent experience), APICS training experience, and proficiency in MS Project, MS Excel, Microsoft Access and Visual.

  ERP system, MRP system, MS Project, Microsoft Excel, Microsoft Access, Visual

• 3d

  Ingénieur Assurance Qualité // Supplier Quality Engineer

  Saint-Laurent, QC

  $40–$60/hrContract

  

  Actalent: Actalent is an operating company of Allegis Group, the global leader in talent solutions.

  7+ YOECandidates need 7+ years in quality or supplier quality, a bachelor's degree in engineering, and experience approving suppliers under AS9100 and customer requirements. Risk assessment and root cause failure analysis skills are needed, and the CQE is preferred.

• 3d

  Coordonnateur Assurance Qualité

  Laval, QC

  Full Time

  HD

  Heroux Devtek: The Corporation specializes in the design, development, manufacture, and repair and overhaul of landing gear, actuation systems and components…

  3+ YOECandidates need a bachelor's in engineering or a manufacturing-focused college diploma, 3 to 5 years of quality assurance experience in manufacturing, and experience with root cause analysis, auditing and AS9100 or ISO 9001 systems. Working knowledge of Lean and English reading and writing are also required.

  5d

  Document Control Coordinator

  Kitchener, ON

  Full Time

  HD

  Heroux Devtek: The Corporation specializes in the design, development, manufacture, and repair and overhaul of landing gear, actuation systems and components…

  2+ YOECandidates need a high school diploma or GED and 2-3 years of document control experience in a similar environment. Strong attention to detail, computer skills and familiarity with AS9100 are required, with SAP, GD&T and post-secondary education in quality or engineering as assets.

  MRP system, SAP, Technical database system

• 3d

  Quality Coordinator

  Halifax, NS

  IM

  I M P Group International Inc.

  3+ YOECandidates need formal quality assurance or quality control training or equivalent experience, plus five years in aerospace or manufacturing and three years in a QA/QC setting. Strong report writing, knowledge of ISO9001 or AS9100, and Microsoft Office skills are required.

  Microsoft Office, SharePoint, JD Edwards EnterpriseOne, Adobe LiveCycle Workspace, SABA

• 3d

  CMM Supervisor

  Saint-Lazare, QC

  Full Time

  

  APEX Precision

  7+ YOECandidates need 7+ years of quality inspection experience, strong hands-on CMM programming skills, and knowledge of GD&T and ISO 9001 or AS9100. Bilingual French and English communication is required.

  Zeiss CMM, Calypso, CMM, JobBoss, MS Office

  3d

  Quality Control Inspector (Weekend)

  Saint-Lazare, QC

  Part Time

  

  APEX Precision

  2+ YOECandidates need a quality control diploma or hands-on machining experience, plus two years in a manufacturing inspection role. They must read GD&T drawings, know ISO 9001 and AS9100, and be comfortable with ERP systems such as JobBoss, Microsoft Office and inspection tools.

  CMM, JobBoss, Microsoft Excel, Microsoft Word, Microsoft Outlook

• 3d

  Quality Manager (12-16 month contract)

  Ontario

  HybridContract

  JC

  JANA Corporation

  3+ YOE3+ MgmtJANA Corporation needs a candidate with a bachelor's degree in engineering, software engineering or quality management, 3-5 years in a quality role, and 3+ years of leadership experience. Knowledge of ISO 9001 or AS9100 and auditing experience is required, with Six Sigma or Lean certification a plus.

  Quality management software

• 4d

  Quality Area Team Lead

  Lunenburg, NS

  

  Stelia Aerospace North America Inc: specializes in the design, development and fabrication of advanced composites structures for the aeronautic, defense and space markets.

  5+ YOECandidates need five years of manufacturing or quality experience, preferably in aerospace, and strong leadership skills. A post-secondary diploma or degree in an industrial or engineering field is an asset, along with intermediate to advanced M365 and ERP skills.

  ERP system

• 4d

  Buyer

  Surrey, BC

  On-siteFull Time

  

  International Water Guard: International Water-Guard is the world's leading provider of flight-certified potable water treatment units, on-demand water heaters, aircraft water…

  2+ YOECandidates need a diploma or bachelor's degree in supply chain, business or a related field, plus at least 2 years of manufacturing purchasing experience, ideally in aerospace. Experience with an ERP/MRP system, knowledge of AS9100 or ISO9001, and the ability to read drawings and BOMs are also required.

  Epicor, SAP, Oracle, Infor, ERP system, MRP system

• 5d

  UAS Technician

  Calgary, AB

  On-siteFull Time

  

  North Vector Dynamics Inc.

  North Vector Dynamics needs candidates with hands-on mechanical and electrical assembly experience, gained through training, manufacturing work or personal UAV or RC builds. Candidates must read drawings and wiring diagrams, use test equipment, and be eligible for a Government of Canada security clearance.

  Multimeter, Oscilloscope, Torque tools, Soldering equipment, ERP system, MRP system

• 5d

  Director of Manufacturing – Precision Manufacturing & Operations

  Canada

  Full Time

  

  Remote People

  10+ YOE5+ MgmtCandidates need 10–15 years of progressive manufacturing experience, including at least 5 years in senior operations leadership. Strong background in complex or precision manufacturing, Lean, ERP systems, budget management and a degree or diploma in engineering or operations is required.

  ERP systems

• 5d

  Quality Control Inspector

  Saskatoon, SK

  Full Time

  

  Calian Group Ltd.: The company went public in 1993 and became Calian Group Ltd.

  5+ YOECandidates need at least 5 years of quality, manufacturing or engineering experience and a technical diploma. They must know electronics manufacturing, IPC inspection standards, quality management systems and root cause analysis.

  IPC-A-610, IPC/WHMA-A-620, measurement equipment, inspection tools

20 companies