“Blueprints and specifications” jobs in Canada

No matching filters. Try another name.

Results

• 1m

  Assembly Technician (Contract)

  Bolton, ON

  $23–$32/hrFull Time

  HT

  Husky Technologies

  Highly competitive wages and shift premiums for afternoon/evening and weekend shifts (pay is dependent on experience and role/level); Key Requirements; Must be able to work rotating shift schedules

  1m

  CNC Machinist - Rotational Shifts only + Benefits package + Paid time off +Shift Premium+ RRSP benefits

  Bolton, ON

  Full Time

  HT

  Husky Technologies

  4+ YOEHighly competitive wages and shift premiums for afternoon/evening and weekend shifts (pay is dependent on experience and role/level); Key Requirements; Must be able to work rotating shift schedules

  CNC, Technical drawings, Troubleshooting, Machining, Leadership, Root cause analysis

• 2h

  Industrial Electrician

  Ontario

  $42.11/hrOn-siteFull Time

  ML

  Maple Leaf Foods Inc.

  5+ YOECandidates need a certified Journeyman Electrician with 5+ years of experience, preferably with the Industrial Apprenticeship Program. Strong knowledge of PLCs, HMIs, motor controls and industrial equipment is required, and a 442A licence is an asset.

  PLC, HMI, frequency drives

• 7h

  Qc electrical inspector

  Nisku, AB

  JC

  Johnson Controls

  Silent-Aire needs candidates with a sharp eye for defects, strong communication and time management, and the ability to lift over 40 pounds. Reading a tape measure and simple fractions are required, and blueprint reading is an asset.

  tape measure

• 14h

  Business Analyst (Senior Systems Analyst)

  Burnaby, BC

  $85k–$112k/yrFull Time

  

  British Columbia Institute of Technology

  6+ YOECandidates need an Institute of Technology diploma or a bachelor's degree in science or business, plus at least six years of relevant IT experience. Strong facilitation, analysis, project management and communication skills are required.

  Ellucian Banner

• 17h

  Electrician

  Fort McMurray, AB

  

  Regional Municipality of Wood Buffalo

  3+ YOECandidates need a certified Electrician journeyperson with three years of commercial or industrial experience, a high school diploma or GED, and a valid Class 5 licence. They also need knowledge of the Canadian Electrical Code and the ability to obtain an RCMP enhanced reliability clearance and a criminal record check.

  PLC, VFD, MCC, SCADA, Microsoft Excel, Microsoft Word

  17h

  Utility Treatment Technician Wastewater Treatment - Level I

  Fort McMurray, AB

  

  Regional Municipality of Wood Buffalo

  1+ YOECandidates need a high school diploma or GED, a Level I Wastewater Treatment Certification and one year of AEP-recognized experience. A valid Class 5 licence, a criminal record check and the physical ability to work outdoors in all conditions are also required.

  laboratory equipment, centrifuges, compost system, Microsoft Word, Microsoft Excel, Microsoft Outlook

• 19h

  Millwright

  Oakville, ON

  OS

  Olymel S.E.C.

  2+ YOECandidates need a valid Industrial Mechanic (Millwright) 433A licence and mechanical skills with hydraulics, pneumatics, conveyors and motors. Experience in manufacturing or food processing is preferred, along with the ability to read blueprints and work with minimal supervision.

  Hand tools, Power tools, Precision measuring instruments, Welding tools, Machine shop equipment

• 19h

  Maintenance worker/engineer

  Langley, BC

  $37.72/hr

  

  Fraser Health Authority

  2+ YOECandidates need a B.C. 4th class Power Engineer certificate and at least two years of recent related experience, or an equivalent mix of education and training. They also need to read blueprints and specifications and communicate well verbally and in writing.

  boiler, autoclave, sterilizer, steam trap, control valve, pump

• 19h

  Machining Co-op student

  Richmond, BC

  $25–$27/hrFull Time

  US

  Unifiller Systems ULC (751786922)

  Unifiller Systems needs a current student enrolled in the CNC Machinist program at BCIT, with basic machining shop knowledge, the ability to read blueprints and tolerances, and a willingness to learn and take feedback.

  Lathe, Milling machine, Grinder, Micrometer, Vernier

• 19h

  Journeyman Sprinkler Fitter – Commercial

  Remote in Canada

  RemoteFull Time

  R

  Rotaflow

  Rotaflow needs a certified sprinkler fitter with a valid trade certification such as a Red Seal or Journeyman ticket, in good standing with UA Local 488. Candidates need experience with new installations and retrofits, blueprint reading, physical stamina for work above head height, and a valid driver's licence.

  Journeyperson, Red Seal, Follow safety precautions in work practices, Communication skills, Organizational skills, Problem solving

• 20h

  Machine Operator

  Abbotsford, BC

  $22–$26/hrTemporary

  

  Manpower

  Candidates need a strong health and safety focus, the ability to read blueprints and work orders, and attention to detail. Working knowledge of high-speed machinery, teamwork, and the physical stamina to lift up to 50 lbs are also required.

  finger-jointer, 4-sided molder, DLT machine

  20h

  Carpenter

  Abbotsford, BC

  $22/hrTemporary

  

  Manpower

  Candidates need to read blueprints, work orders and production schedules, and follow health and safety rules, including wearing protective gear. Strong attention to detail, teamwork, communication and the physical strength to lift up to 50 lbs are also required.

  Power tools, Hand tools, Blueprints, Shop drawings

• 21h

  Director, Design & Engineering

  Ontario

  Full Time

  

  T&T Supermarket

  12+ YOECandidates need a bachelor's degree in architecture, engineering or a related field, plus at least 12 years of progressive building or construction experience. Strong cost analysis, leadership and stakeholder coordination skills are essential, and a valid driver's licence is required.

  Microsoft Excel, Microsoft PowerPoint, Microsoft Outlook, Microsoft Word

  21h

  Repair & Maintenance Technician

  British Columbia

  Full Time

  

  T&T Supermarket

  1+ YOECandidates need 1 to 2 years of repair and maintenance experience, ideally in a fast-paced retail or supermarket setting. Strong technical skills in diagnosing HVAC and refrigeration equipment, reading blueprints, and lifting over 40 lbs are required, and good English is required, with Chinese an asset.

  blueprints, compressors, pumps, fans, cabinet coolers, steam boilers

• 21h

  Journeyperson Plumber

  Calgary, AB

  $44.25/hr

  SR

  Sphere Recruitment Solutions

  Candidates need a valid Journeyperson Plumbing Certificate or Red Seal, a current CSTS certificate, and commercial or industrial plumbing experience (preferred). Strong blueprint reading, code knowledge and physical stamina are required.

  hand tools, power tools, scissor lift

• 21h

  TIG Welder / Fabricator

  Brampton, ON

  On-siteFull Time

  

  Senior plc: The Senior Company is a dual accredited private duty home care company, providing both skilled and non skilled services.

  3+ YOESenior Flexonics Canada needs candidates with at least three years of TIG welding experience, ideally on thin-wall stainless steel, plus blueprint reading, measuring and pipe fitting skills. Candidates must pass a skills test and speak and write fluent English.

  TIG torch, filler rods, rotary tools, turn tables, measuring tapes, weld jigs

• 22h

  Project Coordinator

  Vancouver, BC

  $70k–$90k/yrFull Time

  AO

  Aura Office Environments

  2+ YOEAura Office Environments needs candidates with 2-3 years of construction project coordination experience, ideally at a design-build firm, plus post-secondary training in a construction-related field. Candidates need strong project accounting, drawing interpretation, spreadsheet and construction software skills.

  SiteMax, Premier, Bluebeam, Smartsheet, Google Workspace

• 23h

  Operations Supervisor

  Vancouver, BC

  Full Time

  

  QuadReal Property Group, LP: In 2026, QuadReal Property Group marks 10 years as a global real estate investment, development and operating company—a decade built on long-term…

  5+ YOECandidates need at least 5 years of building operations or supervisory experience in a Class A building, a Power Engineering 4th Class certificate and advanced building management system (BMS) training. Intermediate Microsoft Office and Yardi skills, blueprint reading and a valid driver's licence are also required.

  Cove PM, Yardi, Microsoft Office, SharePoint, Building management system, Fire alarm system

• 23h

  Incoming Quality Control Inspector

  Mississauga, ON

  $26–$28/hrContract

  

  Agilus Work Solutions: Experts in Specialized Talent for Nearly 50 years. Canada's largest, full service, privately-owned recruiting firm.

  2+ YOECandidates need at least 2 years of quality inspection experience in automotive or manufacturing, the ability to read engineering drawings and blueprints, and skill with measuring tools. They must also be able to lift up to 20 kg and communicate and document well.

  calipers, micrometers, torque wrench, thread gauge, Quality Management System (QMS)

• 23h

  Technician, Installation 2

  Markham, ON

  Full Time

  

  AVI-SPL

  2+ YOECandidates need 2 to 4 years of audiovisual installation experience, a high school diploma, and a valid driver's licence. They also need intermediate skills in low-voltage cabling, AV troubleshooting and network integration, plus strong communication skills.

  hand tools, power tools, test equipment

• 23h

  Senior Solutions Designer

  Toronto, ON

  Contract

  

  Randstad Canada

  10+ YOECandidates need extensive experience designing Microsoft cloud solutions, strong Dataverse and relational database modeling skills, and proven enterprise integration expertise. Strong communication skills and the ability to lead technical discussions with stakeholders are also required.

  Microsoft Dynamics 365, Power Platform, Dataverse, Microsoft Azure, Oracle, Microsoft SQL Server

  23h

  Cnc operator

  Saint-Laurent, QC

  $26–$29/hrFull Time

  

  Randstad Canada

  1+ YOECandidates need a DEP in tool machining or equivalent manufacturing training, at least one year of CNC machine tool experience, and solid shop math. They must read English industrial blueprints and show strong attention to detail, punctuality and autonomy on nights.

  CNC machine tools, laser equipment, micrometers, calipers

• 1d

  Industrial Maintenance Electrician

  Alberta

  $48/hr

  

  CRH

  Candidates need knowledge of electrical safety, the ability to read schematics and blueprints, and working knowledge of three-phase motors and programmable controls. Hydraulics, mechanics or related trade knowledge is preferred, and the work requires lifting up to 50 lbs.

  Hoists, Cranes, Hand tools, Power tools

19 companies