“Fastenal PPE program” jobs in Canada

No matching filters. Try another name.

Results

• 6d

  Wood Frame Carpenter

  Chemainus, BC

  

  RON ANDERSON & SONS LTD

  2+ YOECandidates need at least 2 years of carpentry or wood framing experience, secondary school completion and skill with hand, power and pneumatic tools. A carpentry apprenticeship and prefab framing experience are assets.

  hand tools, power tools, measuring instruments

• 7d

  Millwright

  Fort McMurray, AB

  

  Regional Municipality of Wood Buffalo

  3+ YOECandidates need a Certified Journeyperson Millwright credential, high school diploma or GED, and three years of journeyperson experience in a commercial or industrial setting. A valid Class 5 licence, a criminal record check, and the ability to work outdoors in all conditions are also required.

  hand tools, power tools, hoists, lifting devices

• 8d

  Structural Assembler II

  Mississauga, ON

  MH

  Mitsubishi Heavy Industries, Ltd.

  2+ YOECandidates need 2 to 4 years of aircraft assembly experience, skill with hand and power tools, and the ability to read 2D and 3D technical drawings. They must also work rotating shifts, stand for long periods, and pass a respirator fit test.

  Pneumatic tools, Power tools, Hand tools, Jigs, Fixtures

  18d

  Structural Assembler III

  Mississauga, ON

  MH

  Mitsubishi Heavy Industries, Ltd.

  4+ YOECandidates need 4-6 years of aircraft assembly experience, strong blueprint reading and hand and power tool skills, and the ability to work rotating shifts. Current Canadian work authorization and a criminal background check are also required.

  pneumatic tools, power tools, hand tools, jigs, fixtures

  29d

  Structural Assembler II

  Mississauga, ON

  MH

  Mitsubishi Heavy Industries, Ltd.

  2+ YOECandidates need 2-4 years of aircraft assembly experience, the ability to read 2D and 3D technical drawings, and skill with pneumatic and power hand tools. Past aerospace or manufacturing experience is an asset, along with work authorization in Canada and willingness to work rotating shifts.

  Pneumatic tools, Power hand tools, Jigs, Fixtures

• 9d

  Block Machine Operator (Maintenance)

  Markham, ON

  $30.72/hrTemporary

  

  Manpower

  Candidates need mechanical aptitude and hands-on experience maintaining, repairing or operating industrial machinery. They should read imperial and metric measurements, know fasteners and hand and power tools, and follow workplace safety rules. Millwright or industrial mechanic training and concrete or masonry manufacturing experience are assets.

  Hand tools, Power tools, Hydraulic systems, Pneumatic systems, Welding equipment, Batching and control systems

• 12d

  Fence Panel Assembler - Francophone Mobility Program

  British Columbia

  Full Time

  CR

  Cando Recruitment

  Candidates need comfort with hand tools and repetitive assembly, the ability to lift 40 lbs repeatedly, reliable attendance, a high school diploma or equivalent, and enough English to follow safety instructions and read build specifications.

  hand tools, pneumatic tools, jigs, production system

• 15d

  Aircraft Maintenance Engineer - Structures Licensed

  Kelowna, BC

  

  KF Aerospace

  2+ YOECandidates need a Transport Canada 'S' licence and at least 2 years of experience with aircraft structural repair. They must read maintenance manuals, follow safety and tool control rules, work well alone and in a crew, and be willing to travel and work any shift.

  jigs and fixtures, calibrated tooling, ground equipment

• 18d

  Shop Labourer- Alex & Alice Boucher Ft. McKay Industrial Park

  Fort McMurray, AB

  

  Fort McKay Group of Companies: Fort McKay Group of Companies (FMGOC) is a large oilfield construction and services company located in Alberta.

  Candidates need mechanical aptitude, the ability to lift 50+ lbs, a valid Class 5 licence with a satisfactory 3-year driver's abstract, and experience in heavy equipment, mining, construction or industrial shops. Forklift, loader, telehandler or aerial lift experience and WHMIS or First Aid certification are assets.

  forklift, loader, telehandler, aerial lift, jacks, stands

  18d

  Shop Labourer- Alex & Alice Boucher Ft. McKay Industrial Park

  Fort McMurray, AB

  

  Fort McKay Group of Companies: Fort McKay Group of Companies (FMGOC) is a large oilfield construction and services company located in Alberta.

  Candidates need mechanical aptitude, the ability to lift 50+ lbs, a valid Class 5 licence with a satisfactory 3-year driver's abstract, and experience in heavy equipment, mining, construction or industrial shops. Forklift, loader, telehandler or aerial lift experience and WHMIS or First Aid certification are assets.

  forklift, loader, telehandler, aerial lift, jacks, stands

• 21d

  Aircraft Assembler-Mississauga (93200)

  Mississauga, ON

  GA

  GAL AeroStaff

  2+ YOECandidates need 2 to 3 years of aircraft structural assembly or aerospace manufacturing experience and a college diploma or vocational training in aircraft assembly, manufacturing or mechanical technology. They must read blueprints and use precision tools, and they must follow aerospace safety standards.

  pneumatic tools, jigs, fixtures, precision measuring instruments

  21d

  Aircraft Assembler Calgary (93200)

  Calgary, AB

  GA

  GAL AeroStaff

  3+ YOECandidates need a college diploma or vocational training in aircraft assembly or a related field, plus 3 to 5 years of aircraft structural assembly experience. They must read blueprints well, work with precision tools and understand aluminum, composite and titanium materials.

  pneumatic tools, precision measuring instruments, assembly jigs, fixtures, alignment tools

• 25d

  Wall Assembler

  Kingston, ON

  $21.80–$30/hrFull Time

  H

  Haakon

  1+ YOECandidates need mechanical aptitude, the ability to read drawings and measurements, and attention to detail. One or more years of construction or skilled labour experience is preferred, and reliable transportation is required.

  hand tools, power tools, drills, fastening devices, measuring tools

• 25d

  Maintenance Technician

  Prince George, BC

  $36.50/hrOn-site

  I

  IREN

  Candidates need mechanical repair experience, strong troubleshooting and attention to detail, and the physical ability to lift heavy objects and work at heights. A clear criminal record check and the ability to commute daily to the site are required.

  forklift, telehandler, skid steer, aerial boom lift, MS Office, electronic timecards

• 27d

  Health & Safety Engineer

  Ingersoll, ON

  Full Time

  A

  AMTB

  Candidates need experience in health, safety and environmental management, knowledge of ISO 14001 and ISO 45001, and familiarity with WSIB and Ontario workplace legislation. Strong communication and employee-relations skills are needed.

  IQS, Yodeck, Fastenal PPE program

  27d

  Health & Safety Specialist

  Woodstock, ON

  Full Time

  A

  AMTB

  Candidates need experience in health, safety and environmental work in a manufacturing setting, familiarity with ISO 14001 and ISO 45001 management systems, and knowledge of Canadian health and safety legislation. Strong communication and employee relations skills are expected.

  IQS, Yodeck, Fastenal PPE program

• 28d

  Experienced Aircraft Maintenance Technician AMT

  Halifax, NS

  IM

  I M P Group International Inc.

  4+ YOECandidates need at least 4 years of aircraft maintenance experience at an AMO or MRO, plus a recognized apprenticeship, aircraft maintenance program or TCCA AME licence. They must read technical documentation and be eligible for Controlled Goods, Secret clearance and RAIC clearances.

  hand tools, power tools, support equipment

  28d

  Airframe Mechanic

  Halifax, NS

  IM

  I M P Group International Inc.

  4+ YOECandidates need at least 4 years of aircraft maintenance experience at an AMO or MRO, plus a recognized aircraft maintenance or apprenticeship credential or a TCCA AME licence. They must read technical manuals and drawings, understand airworthiness requirements, and be eligible for Secret clearance and the Controlled Goods Program.

  hand tools, power tools, support equipment

• 29d

  Journeyperson Millwright

  Calgary, AB

  Full Time

  

  Startec

  Candidates need a Journeyman Millwright certification from a recognized apprenticeship, plus experience in an oil and gas manufacturing environment. Strong mechanical, hydraulic, pneumatic and welding knowledge, blueprint reading and troubleshooting skills, and good physical stamina are required.

  precision measuring tools, hand and power tools, welding equipment

• 29d

  Sub Assembler I - Electrical

  North Bay, ON

  $21–$27/hr

  ME

  MACLEAN ENGINEERING & MARKETING CO. LIMITED

  Candidates need a minimum high school diploma or certificate of completion. Electrical, computer, and hand-tool assembly experience is an asset, and the ability to read basic engineering drawings and schematics is required.

  Multimeter, Hand and small power tools, Soldering equipment, Crimping tools

• 29d

  Carpenter - Revelstoke

  Canada

  Full Time

  

  Paradigm Building Solutions Ltd

  3+ YOECandidates need three to five years of carpentry or related construction experience, with strong framing skills and the ability to read drawings. Panelized construction experience, Fall Protection certification and a valid driver's licence are assets, and Red Seal is not required.

  hand tools, power tools, saws, crane

  29d

  Carpenter

  Revelstoke, BC +3

  Full Time

  

  Paradigm Building Solutions Ltd

  3+ YOECandidates need three to five years of carpentry or related construction experience, strong framing skills and the ability to read blueprints. Panelized construction, crane-assisted erection, Red Seal or Journeyperson certification and Fall Protection are assets, and a valid driver's licence is preferred.

  hand tools, power tools, saws, crane

• 29d

  CNC Lathe Programmer/Set-Up Operator (Mazak Mazatrol)

  Brampton, ON

  Full Time

  

  Davis Standard: The company has three manufacturing and technical facilities in the United States, as well as subsidiaries with facilities in China, Germany and the…

  5+ YOECandidates need at least 5 years of CNC lathe programming and set-up experience, extensive Mazak and Mazatrol experience, and the ability to read drawings and GD&T. A technical credential in CNC machining or equivalent experience is required.

  Mazak CNC lathe, Mazatrol, calipers, micrometers, bore gauges, indicators

• 29d

  Assembly Worker

  Winnipeg, MB

  Full Time

  C

  Cubex

  Sandvik needs candidates with a mechanical aptitude and a willingness to learn heavy equipment manufacturing and technical drawings. Knowledge of basic hand tools, fasteners and fittings is needed, and forklift or overhead crane experience is an asset.

  hand tools, power tools, forklift, overhead crane

17 companies