“test bench” jobs in Canada

No matching filters. Try another name.

Results

• 28d

  Engineer -Special Tools & Bench Test Equipment (ISR)

  Saint-Bruno, QC

  

  Alstom

  5+ YOECandidates need a mechanical engineering degree, at least 5 years of relevant engineering experience, and CATIA V5 skills for tool drawings. They also need knowledge of electromechanical, hydraulic and pneumatic equipment testing, plus fluent French and English.

  CATIA V5

  28d

  Special Tools & Bench Test Equipment Engineer

  Saint-Bruno, QC

  

  Alstom

  5+ YOEAlstom needs a mechanical engineering bachelor's degree, membership in the Ordre des ingénieurs du Québec, and 5 to 10 years of relevant experience. Candidates should design maintenance tools in CATIA V5, know electromechanical, hydraulic and pneumatic testing, and work independently with leadership skills.

  CATIA V5

• 29d

  Spécialiste en Ingénierie Systèmes des bancs d’essai / Test Bench System Engineering Specialist

  Montréal, QC

  Full Time

  AC

  Airbus Canada Limited Partnership

  10+ YOECandidates need an engineering degree in electrical or mechanical engineering, or an equivalent technical background, plus more than 10 years of relevant experience. Test bench instrumentation and design expertise, English, and system integration skills are required, with AutoCAD and A220 experience as assets.

  AutoCAD

• 21m

  Water Quality Engineer (Engineer)

  Newmarket, ON

  Full Time

  

  The Regional Municipality of York

  5+ YOECandidates need a university degree in civil, mechanical or chemical engineering and a Professional Engineer (P.Eng.) licence in Ontario. At least five years of municipal water or wastewater engineering experience is required, including project coordination.

  MS Office

• 38m

  Operator, Water Treatment

  Red Lake, ON

  $52/hr

  

  Kinross Gold Corporation: Kinross Gold Corporation is a senior gold mining company with a diverse portfolio of mines and projects in the United States, Brazil, Chile,…

  Kinross Gold Corporation needs a college diploma in water treatment, environmental science or a related field, with a water treatment operator certification (Level 2 or higher) considered an asset. Candidates need mechanical aptitude, troubleshooting skills, and knowledge of pumps, filtration, chemical treatment and environmental regulations.

  forklift, pumps, chemical dosing systems, membrane treatment systems, bioreactors, instrumentation

• 3h

  Penetration Tester - Infrastructure & Red Team (Canada)

  Remote in Canada

  $90k–$120k/yrRemoteFull Time

  

  Packetlabs

  3+ YOEPacketlabs needs candidates with at least 3 years of penetration testing or red teaming experience across Windows, Linux, Active Directory and cloud platforms. Strong technical writing, presentation skills and offensive security certifications such as OSCP are valued.

  Active Directory, Microsoft Entra ID, AWS, Microsoft Azure, Google Cloud Platform, Kubernetes

  3h

  Penetration Tester - Hardware (Canada)

  Remote in Canada

  $90k–$140k/yrRemoteFull Time

  

  Packetlabs

  Candidates need an information security, computer science or electrical engineering background, or equivalent hands-on experience. They should have electronics skills, soldering and debug-interface experience, bench instrument skills, and Python with enough C to read embedded code.

  Ghidra, IDA, Binwalk, Logic analyzer, Oscilloscope, Multimeter

  3h

  Penetration Tester (Canada)

  Remote in Canada

  $90k–$120k/yrRemoteFull Time

  

  Packetlabs

  Candidates need an OSCP or Burp certification, experience with attack proxies like Burp Suite, and solid programming knowledge. Two or more years in information security and a post-secondary degree are preferred.

  Burp Suite

• 4h

  Specialist - Mechanical Engineering

  London, ON

  $60k–$70k/yrOn-siteFull Time

  

  Wabtec: Wabtec is a leading global provider of equipment, systems, digital solutions, and value-added services.

  2+ YOECandidates need a bachelor's degree in engineering with a SolidWorks certification, plus 2-4 years of engineering experience with AutoCAD, SolidWorks, 3D modeling and 2D drafting. Knowledge of pneumatic, hydraulic and HVAC systems is an asset.

  SolidWorks, AutoCAD, EPDM, MRP system

• 4h

  Mechatronics Lab Engineering Intern (January - August 2027)

  Vancouver, BC

  $30–$33.75/hrOn-siteInternship

  

  Rivian and Volkswagen Group Technologies

  Rivian and Volkswagen Group Technologies needs a student in an engineering program at a Canadian university. Candidates need soldering, electrical testing and scripting skills, and some lab experience with hardware.

  Power analyzers, Variable power supplies, Digital multimeters, Atlassian Jira, Atlassian Confluence, JAMA

  21h

  Sr Controls Engineer, Body Controls

  Vancouver, BC

  HybridFull Time

  

  Rivian and Volkswagen Group Technologies

  5+ YOECandidates need a bachelor's degree in electrical, computer or software engineering and 5+ years of automotive or embedded software experience. Expertise in C and Python, vehicle networks, diagnostics and functional safety (ISO 26262) is required; travel of up to 10% is expected.

  JAMA, Flow, HIL test bench, SIL framework

• 9h

  Laboratory Assistant, Accessioning

  Vancouver, BC

  Full Time

  

  PHSA - Provincial Health Services Authority

  1+ YOECandidates need Grade 12, a recognized Lab Assistant training program and one year of recent related experience. PHSA also requires computer data entry skills, typing at 25 wpm and the physical ability to do the duties.

  Laboratory Information System (LIS), ECG equipment, Centrifuge, Holter monitor, Refrigerators and freezers, Email

• 15h

  Principal Analog Mixed Signal Designer - 19497

  Mississauga, ON

  S

  Synopsys

  5+ YOECandidates need a PhD with 5+ years or a Master's with 8+ years of hands-on analog IC design experience. Strong CMOS skills, detailed SerDes sub-circuit design experience and SPICE simulation expertise are required.

  SPICE simulators, Verilog-A, schematic entry tools, physical layout tools, MATLAB, Python

• 19h

  Millwright

  Nisku, AB

  $40/hrContract

  

  Randstad Canada

  Candidates need an active Alberta Journeyperson Millwright ticket or Red Seal endorsement, plus proven hands-on gearbox rebuild and hydraulic repair experience. Strong diagnostic skills and clear English for logging repairs are also required.

  Laser alignment equipment, Dyno test equipment, Hydraulic test equipment

• 20h

  Technician - Clinical & Analytical Development

  Oakville, ON

  Full Time

  

  VitalBio

  2+ YOECandidates need a college or bachelor's degree in a life science, two or more years of hands-on assay work in a diagnostic or biotech setting, and skill with techniques such as ELISA and flow cytometry, plus strong pipetting and troubleshooting ability.

  Liquid handlers, MS Excel, MS Word, Laboratory equipment

• 20h

  FPGA Verification Engineer

  Montréal, QC

  $140k–$160k/yrContract

  

  Aversan: (www.aversan.com) is a trusted multi-service engineering and electronics manufacturing company.

  Aversan needs a bachelor's degree in electrical or computer engineering, strong experience verifying complex digital systems, and working knowledge of SystemVerilog, UVM, ModelSim/QuestaSim, and ARINC, AMBA, AXI, PCIe and Ethernet buses.

  ModelSim, QuestaSim, SystemVerilog, UVM, DOORS, Microsoft Office

• 20h

  Director, Data Science

  Remote in Canada

  Remote

  

  GitLab: GitLab Duo Agent Platform provides AI agents that automate tasks across the software lifecycle.

  12+ YOE6+ MgmtCandidates need 12+ years in data science or analytics, including 6+ years leading teams and 3+ years managing managers in B2B SaaS or tech. They need strong business acumen, executive communication, deep statistics and causal inference skills, and enough SQL, Python and ML depth to guide the team.

  GitLab, SQL, Python

• 21h

  Manufacturing Tooling and Process Design Intern

  Boucherville, QC

  

  Dana Incorporated

  Dana needs a student in Industrial Engineering, Operations and Logistics, Mechanical Engineering or a related field. Candidates need good computer skills in Microsoft Office (SharePoint an asset), attention to detail, teamwork, and French proficiency, spoken and written; English is an asset.

  Microsoft Office Suite, SharePoint, Laser welding equipment

• 1d

  Manager, Transit Infrastructure

  Nova Scotia

  

  Halifax Regional Municipality

  5+ YOE5+ MgmtCandidates need an undergraduate degree in engineering, transportation planning, construction management, project management or a related field. They must have at least five years of complex capital project delivery and five years of progressive leadership experience, plus project management training and budget control experience.

  1d

  Manager, Transit Infrastructure

  Nova Scotia

  

  Halifax Regional Municipality

  5+ YOE5+ MgmtCandidates need an undergraduate degree in engineering, transportation planning, construction management, project management or a related field. They must have at least five years of complex capital project delivery and five years of progressive leadership experience, plus project management training and budget control experience.

• 1d

  Components Engineer / Specialist

  Burnaby, BC

  

  STRIVE Recruitment: STRIVE is a specialist recruitment firm offering proactive recruitment solutions in the areas of Accounting & Finance, Corporate Administration,…

  5+ YOECandidates need an electrical or electronics engineering degree, or a relevant technical diploma with equivalent hands-on experience, plus 5+ years in electronics design or components engineering. Strong analog electronics, bench testing and supplier experience are required.

  electronic lab equipment

• 1d

  Maintenance Mechanic

  Toronto, ON

  $36.28–$36.91/hrOn-siteFull Time

  UH

  University Health Network: University Health Network (UHN) is Canada's largest research hospital, which includes Toronto General and Toronto Western Hospitals, Princess…

  2+ YOECandidates need high school plus a recognized trade apprenticeship or a Building Operations or licensed trade certificate, along with two to four years of on-the-job training or six years of related experience. They must lift 11 to 20 kg and work with good judgment, strong communication and a client-service attitude.

  power tools, hand tools, test instruments, welding equipment

  1d

  Maintenance Mechanic

  Toronto, ON

  $36.28–$36.91/hrOn-siteFull Time

  UH

  University Health Network: University Health Network (UHN) is Canada's largest research hospital, which includes Toronto General and Toronto Western Hospitals, Princess…

  2+ YOECandidates need a high school diploma plus an apprenticeship or recognized equivalent, and a Building Operations certificate or licensed trade certification such as HVAC, plumbing, millwright or electrician. A TSSA Stationary Engineer certificate is an asset, along with 2 to 4 years of on-the-job training or six years of related experience.

  hand tools, power tools, test instruments, welding equipment

• 1d

  Staff Validation Engineer - Optical Interconnect

  Ottawa, ON

  Full Time

  MT

  Marvell Technology Italy S.r.l.

  2+ YOECandidates need a Bachelor's, Master's or PhD in electrical engineering, physics, optical engineering or a related field, plus 2 to 5 years of related experience. Strong lab skills with high-speed electrical and optical instruments, Python bench automation and high-speed PCB design are required.

  Oscilloscope, BERT, VNA, TDR, AWG, Spectrum analyzer

18 companies