“Electrical testing devices” jobs in Canada – Page 21

No matching filters. Try another name.

Results

• 20d

  Mechanical Designer (1-Year Contract)

  Vancouver, BC

  $100k–$130k/yrHybridContract, Temporary

  

  Invinity Energy Systems: Invinity Energy Systems plc (AIM:IES) manufactures vanadium flow batteries for the large-scale energy storage requirements of businesses, industry…

  5+ YOECandidates need a diploma or degree in mechanical design or a related field, plus 5+ years designing fabricated components. Advanced CAD skills in SolidWorks or Onshape, knowledge of design for manufacturing and GD&T, and a safety focus are required.

  SolidWorks, Onshape

• 20d

  Electronics Technologist

  Vancouver, BC

  Full Time

  

  TRIUMF

  7+ YOECandidates need an electronics engineering technology diploma and 7+ years of hands-on experience after it, with practical skills in electronics, instrumentation and PLC-based control systems. Strong troubleshooting, soldering, schematic reading and written and verbal communication are required, and Canadian citizenship or permanent residency is mandatory.

  PLC, HMI, Allen Bradley controllers, Rockwell Automation, Altium Designer, Microsoft Office

• 20d

  Controls Systems Technician

  Richmond Hill, ON

  $24.10–$33.32/hrFull Time

  JC

  Johnson Controls LP CAN

  2+ YOECandidates need demonstrated technical aptitude, the ability to use hand tools and basic test equipment, and strong computer skills. A valid Full G driver's licence with a good driving record and willingness to travel across the Greater Toronto Area are required, and two years of experience installing electronic or mechanical systems is preferred.

  Johnson Controls configuration and commissioning tools, Hand tools, Basic electronic test equipment, Company vehicle

• 20d

  Electrical Generation Technician

  Inuvik, NT

  $54.10–$65.72/hrFull Time

  

  NORTHWEST TERRITORIES POWER CORPORATION: NTPC also owns and operates alternative energy assets used for the supply of residual heat, solar power and co-generation.

  5+ YOECandidates need an Electrical Technologist certification, preferably in power generation, with at least five years of electrical test equipment and genset troubleshooting experience, and utility or power plant experience. They must be eligible for CET registration, hold a full Class 5 licence, and pass a criminal records check.

  electrical test equipment, electronic governors, voltage regulators, PLC systems, SCADA, AutoCAD

• 20d

  Controls Systems Software Designer - Robot

  Cambridge, ON

  $36.54–$50.24/hr

  

  ATS Automation: ATS’ reputation, knowledge, global presence and standard automation technology platforms differentiate the Company and provide competitive…

  4+ YOECandidates need 4+ years of industrial automation experience, including robot software design for PLC- and robot-based systems. Strong troubleshooting, PLC architecture and communication skills are required.

  ABB robots, FANUC robots, KUKA robots, Rockwell Studio 5000, ControlLogix, GuardLogix

• 20d

  Senior Electrical Engineer

  Richmond, BC

  $100k–$130k/yrFull Time

  

  Saltworks Technologies

  5+ YOECandidates need a diploma or degree in electrical engineering technology, 5 to 8 years of industrial electrical experience, and strong English communication. Knowledge of Canadian Electrical Code, schematic reading, and EPLAN or AutoCAD Electrical is required or an asset.

  EPLAN, AutoCAD Electrical, AutoCAD

  20d

  Intermediate Electrical Engineer

  Richmond, BC

  $80k–$100k/yrFull Time

  

  Saltworks Technologies

  3+ YOESaltworks Technologies needs candidates with a diploma or degree in electrical engineering technology, 3 to 5 years of industrial electrical experience, and hands-on troubleshooting skills. They should read schematics well, know the Canadian Electrical Code, and be fluent in English. EPLAN or AutoCAD Electrical is an asset.

  EPLAN, AutoCAD Electrical, AutoCAD

• 20d

  Operations Engineer

  Toronto, ON

  H

  Hines

  2+ YOECandidates need a BES diploma, a 3rd or 4th class Operating Engineer certificate, or an Ontario trades certification, plus two or more years operating and maintaining facilities. Strong English communication and comfort with safety-critical tools and occasional ladder and scissor lift work are also needed.

  BAS, CMMS, scissor lift, ladder, mobile device

• 20d

  Summer Student - Protection and Control Technologist

  Calgary, AB

  

  AltaLink

  Candidates need to be full-time students in a two-year electrical, wireless, telecom or electronics engineering technology program. They must have a valid Class 5 licence, safety awareness, computer and spreadsheet skills, and the ability to work independently, handle adverse weather and accept out-of-town work.

  Computers, Spreadsheets

• 20d

  Installation Technician

  Kitchener, ON

  $30–$36/hrFull Time

  

  Wajax: operates an integrated distribution system providing sales, parts and services to a broad range of customers in diverse sectors of the Canadian…

  1+ YOECandidates need a high school diploma, a Crane Utility Fleet license, and working knowledge of hydraulics. Electrical systems expertise and welding or fabrication experience are also needed, with 1 to 7 years of experience depending on level.

  welding equipment

• 21d

  Electrician

  Greater Sudbury, ON

  $34.18–$38.20/hr

  H

  healthscie

  5+ YOECandidates need a Grade 12 diploma, a Journeyperson certification in good standing with Skilled Trades Ontario, and at least five years of electrical work. Two years in a healthcare setting is preferred, along with knowledge of electrical codes and the ability to lift up to 18 kilograms.

  multimeter, megohmmeter, power quality analyzer, infrared thermal imaging, Microsoft Office

• 21d

  Co-op, Delivery - Projects (LCS)

  Cambridge, ON

  $21–$32/hrHybridFull Time

  RC

  RA Canada Ltd. (CAN)

  Candidates need active enrollment in a four-year or advanced degree program at an accredited university. Helpful extras include industrial automation or electrical experience, a 3.0 GPA, prior Rockwell internship, and skill at leading teams and presenting complex information.

  Rockwell Automation software, HMI, P&ID drawings, project management software

  21d

  Co-op, Delivery - Projects (LCS)

  Cambridge, ON

  $21–$32/hrHybridFull Time

  RC

  RA Canada Ltd. (CAN)

  Candidates need active enrollment in a four-year or advanced degree program at an accredited university. Helpful extras include industrial automation or electrical experience, a 3.0 GPA, prior Rockwell internship, and skill at leading teams and presenting complex information.

  Rockwell Automation software, HMI, P&ID drawings, project management software

• 21d

  Principal Analog Design Engineer-19318

  Markham, ON

  S

  Synopsys

  6+ YOECandidates need a PhD with 6+ years or a Master's with 8+ years of analog and mixed-signal IC design experience, including FinFET circuit design. Strong transistor-level CMOS and SPICE simulation skills are required.

  Spectre, HSPICE, Verilog-A, schematic entry tools, Python, Perl

• 21d

  Test Engineer - Laser Device Characterization & Automation

  Ottawa, ON

  On-siteFull Time

  R

  Ranovus

  3+ YOERanovus needs candidates with a bachelor's degree in an engineering or science field and 3+ years of semiconductor, photonics or laser testing experience. Strong Python skills and hands-on experience with lab instruments such as SMUs, OSAs and oscilloscopes are required.

  Source measure units (SMU), Optical spectrum analyzer (OSA), Power meter, Oscilloscope, Temperature controller, Environmental test chamber

  21d

  Hardware Lab Technician

  Ottawa, ON

  On-siteFull Time

  R

  Ranovus

  2+ YOECandidates need an Electronics Technologist diploma, 2 to 4 years of relevant experience, and strong electronics and troubleshooting skills. Hands-on soldering experience and attention to detail and lab safety are essential.

  Multimeter, Soldering station, Microscope, ESD equipment, UPS units, Clean air hood

• 21d

  Hardware Designer

  Remote in Canada

  $95k–$145k/yrRemoteFull Time

  

  Fidus Systems: Founded in 2001, Fidus Systems is a premier electronic system design and development company with specialized expertise in FPGA design, embedded…

  5+ YOECandidates need at least 5 years of electronics design experience and a degree in electrical or computer engineering. Strong knowledge of high-speed circuits, multi-layer PCB design and high-speed protocols such as PCIe, DDR4 and USB-C is required.

  OrCAD Capture CIS, Cadence Allegro, LTSpice, oscilloscope, VNA, signal generator

• 21d

  Heavy Duty Mechanic (Intermodal)

  Winnipeg, MB

  

  CN

  Candidates need diesel, automotive, truck and coach or hydraulics experience, a Diploma of Vocational Studies in Heavy Duty Mechanic, and a valid driver's licence. They must be at least 18, hold qualified 310T/421A mechanic status, and pass medical fitness for duty.

  Electric welding equipment, Oxy-acetylene welding equipment, Lubrication equipment, Measuring devices

• 21d

  Electrical Manufacturing Engineer

  Canada

  Full Time

  NN

  NTI Novatronics

  1+ YOECandidates need a bachelor's degree in manufacturing, mechanical or industrial engineering (or a related field), with 1 to 3+ years in manufacturing or process engineering. An electrical engineering technologist credential is preferred, along with strong analytical skills and the ability to read engineering drawings.

  Manufacturing processes, Documentation, Procurement, Inspection, Reporting, Regulatory compliance

• 21d

  Électricien(ne) / Electrician

  Montréal, QC

  On-siteFull Time

  

  CAD Railway Industries: In 2017, CAD strengthened its national reach by acquiring Calgary-based Caltrax Inc., Western Canada’s only independent rail repair services…

  Candidates need a vocational diploma (DEP) in maintenance or construction electricity, functional English reading ability, good physical condition and comfort working in difficult conditions. Railway experience is an asset.

  schémas électriques, appareils de test électrique

• 21d

  Mechanic Full Time

  Toronto, ON

  Full Time

  

  Marriott

  Candidates need a driver's licence and a high school diploma or GED, with some general maintenance and painting experience preferred. Hotel engineering experience is an asset, and the ability to lift up to 50 pounds without help is required.

  POS

• 21d

  Aircraft Quality Inspector (AME License Required)

  Fort Erie, ON

  Full Time

  AH

  Airbus Helicopters Canada Ltd

  10+ YOECandidates need a TCCA AME licence, a bachelor's degree or equivalent experience, and 10 years of aircraft component quality inspection. Airbus H125, H130 or H135 type rating training and strong English communication are also required.

  SAP, Smartsheet, OnBase, Orion eTechPub, Microsoft Office, Adobe Acrobat

• 21d

  Electronics Specialist 1

  St. John's, NL

  Full Time

  

  Canada Post - Postes Canada

  2+ YOECanada Post needs a 2-year electronics diploma (DEC in Quebec) and two years of electronics maintenance experience within the last five years, or a Canada Post-funded diploma. Candidates need hands-on skill with electronic and mechanical systems, physical stamina for heavy lifting and cramped spaces, and basic computer skills.

  Hand tools, Power tools, Test equipment, Electronic gauging devices, Motorized lifting equipment, Computerized Maintenance Management System

• 21d

  Electrical Designer (12 Month Contract)

  Peterborough, ON

  $68k–$109k/yr

  

  BWXT

  5+ YOECandidates need an electrical or electronic engineering technology diploma, AutoCAD and SolidWorks experience, and strong English communication skills. Control system design knowledge and the ability to work with minimal supervision are also required.

  AutoCAD, AutoCAD Electrical, Autodesk Inventor, SolidWorks, IntEC

21 companies