“Heating systems” jobs in Canada – Page 31

No matching filters. Try another name.

Results

• 14d

  Building Systems Technician III

  Ottawa, ON

  

  Canadian Blood Services

  Candidates need post-secondary education in a relevant discipline, preferably heating and cooling or electrical systems, or an equivalent mix of education and experience. Building Environmental Systems Operator Class I and II certificates are required, along with six months of building automation experience, a valid driver's licence and a personal vehicle.

  MS Office, Building automation systems, Card access systems, Diesel generators

• 14d

  Heating Service Technician - Gas (Sign-on Bonus)

  St. John's, NL

  Full Time

  

  A3 Irving Energy Inc

  2+ YOECandidates need a valid Gas Technician licence, knowledge of wiring, plumbing and some air conditioning, and 2 to 4 years of experience preferred. Strong customer service, communication and independent work skills are required, and Oil and Gas dual licensing is an asset.

  thermostat tools, PPE

  14d

  Heating Service Technician - Gas (Sign-on Bonus)

  St. John's, NL

  Full Time

  

  A3 Irving Energy Inc

  2+ YOECandidates need a valid Gas Technician licence, knowledge of wiring, plumbing and some air conditioning, and 2 to 4 years of experience preferred. Strong customer service, communication and independent work skills are required, and Oil and Gas dual licensing is an asset.

  thermostat tools, PPE

  14d

  Heating Service Technician - Oil

  Kentville, NS

  Full Time

  

  A3 Irving Energy Inc

  2+ YOECandidates need a valid Oil Burner Technician licence, knowledge of wiring, plumbing and some air conditioning, and 2 to 4 years of experience preferred. Strong customer service and communication skills are required.

  Service truck, Diagnostic tools

  14d

  Heating Service Technician - Oil

  Kentville, NS

  Full Time

  

  A3 Irving Energy Inc

  2+ YOECandidates need a valid Oil Burner Technician licence, knowledge of wiring, plumbing and some air conditioning, and 2 to 4 years of experience preferred. Strong customer service and communication skills are required.

  Service truck, Diagnostic tools

• 14d

  Assistant Professor - Urban Environmental Remote Sensing

  Toronto, ON

  $125k–$170k/yr

  

  University of Toronto

  Candidates need a Ph.D. in Geography, Geomatics, Environmental Science or a related field by appointment, plus a record of research excellence and teaching. Expertise in remote sensing and geographic data science applied to urban and environmental change is expected.

  Geographic information systems

• 14d

  Pipeline Coater

  Grande Prairie, AB

  Full Time

  MP

  MasTec Purnell Canada Inc.

  1+ YOECandidates need at least one year of industrial coating experience, familiarity with spraying and sandblasting equipment and pipeline coating products, and valid H2S, WHMIS and First Aid tickets. A valid Class 5 driver's licence is required and NACE certification is an asset.

  sandblasting equipment, heating sources

• 14d

  Warehouse Manager

  Regina, SK

  

  Reliance Home Comfort

  Candidates need warehouse or supply chain experience, previous management experience and strong written, verbal and negotiation skills. They must be comfortable with MS Word, Excel, PowerPoint and Outlook, able to lift up to 75 lbs with equipment, and hold a valid Class 5 driver's licence.

  material handling equipment

• 14d

  Shipper-Receiver evg

  Bedford, NS

  $17–$18/hr

  

  Bureau Veritas

  Candidates need a high school diploma, a valid full driver's licence with a good driving record, and knowledge of the Bedford area. Strong computer, attention-to-detail and communication skills are required, along with availability for shifts and overtime and the ability to lift up to 40 lb.

  Microsoft Teams, Microsoft Outlook, Microsoft Excel, Microsoft Word, oven, coolers

• 14d

  Press/Forge Engineering Technician

  Ingersoll, ON

  

  IMT CORPORATION

  5+ YOECandidates need at least 5 years of press or forging experience with hands-on equipment operation and troubleshooting. Technical training in a related field is preferred, and Canadian citizenship or permanent residency is required.

  MS Excel, MS Word

  14d

  Industrial Millwright - 433A

  Port Colborne, ON

  

  IMT CORPORATION

  3+ YOECandidates need an Ontario 433A Millwright certificate, at least 3 years of industrial maintenance experience, and skills in bearings, hydraulics, pneumatics, pumps, gearboxes, alignment and blueprint reading. Heavy physical work, overtime and emergency breakdown response are expected.

  dial indicators, laser alignment systems, hydraulic schematics, overhead cranes, forklift

  14d

  Industrial Electrician

  Port Colborne, ON

  

  IMT CORPORATION

  3+ YOECandidates need a valid Ontario Industrial Electrician (442A) Certificate of Qualification, industrial maintenance experience (3-5 years preferred), and strong troubleshooting skills with PLCs, VFDs, motors and sensors. A valid driver's licence and comfort in heavy industrial settings are required.

  PLC systems, VFD, Allen-Bradley, Siemens, HMI, infrared pyrometer

• 14d

  Journeyman Machinist

  Edmonton, AB

  Full Time

  

  Stream-Flo: manufactures wellheads, gate valves, check valves, and surface safety valves for the worldwide energy industry.

  10+ YOECandidates need at least 10 years of conventional lathe experience and an Alberta journeyman machinist certification or equivalent Red Seal. Some milling, large-part turning and crane or forklift experience are preferred.

  Lathe, Milling machine, Forklift, ERP system

• 14d

  HVAC Service Sales Representative – Maintenance Contracts

  British Columbia

  Full Time

  

  Aplin

  3+ YOECandidates need proven commercial HVAC maintenance sales success, at least three years of HVAC or facilities experience, and strong commercial equipment knowledge. A valid driver's licence and willingness to travel across the Lower Mainland are required.

  Cell phone, Sales tools

• 14d

  Journeyman welder

  Nisku, AB

  JC

  Johnson Controls

  Candidates need a valid Alberta Journeyperson Welder Certificate, a high school diploma, and welding certifications in GMAW, FCAW and SMAW to CSA W47.1 or W47.2. Experience reading blueprints and welding procedure specifications is required.

  welding equipment, brakes, shears, straightening machines, bending machines, flame cutting equipment

• 14d

  HVAC/Hydronics Inside Sales Representative

  Rexdale, ON

  

  Noble Corporation

  Candidates need HVAC industry experience, knowledge of HVAC equipment, and experience preparing quotes and supporting orders. Strong sales, customer service, organization and communication skills are required, along with basic Microsoft Office skills.

  Microsoft Outlook, Microsoft Excel, Microsoft Word

• 14d

  HVAC Technician

  Winnipeg, MB

  Full Time

  AI

  Ainsworth Inc

  Candidates need a high school diploma or GED, a current driver's licence, and knowledge of HVAC tools, practices and gas codes. Strong communication, problem-solving and customer service skills are also required.

  Thermostats, Humidistats, Compressors

• 14d

  Facility Service Worker

  Saskatoon, SK

  On-site

  GO

  Government of Saskatchewan

  Candidates need working knowledge of building maintenance and operations, basic computer skills, good physical fitness for manual work and climbing ladders, a valid driver's licence and a Fireman Boiler Operator Certificate or the ability to get one within a year.

  grounds equipment, maintenance management software, boiler

  14d

  Facility Service Worker

  Prince Albert, SK

  GO

  Government of Saskatchewan

  Candidates need working knowledge of building maintenance and operations, good physical condition to lift up to 50 lbs and climb ladders, and a valid driver's licence. A valid Fireman Boiler Operator Certificate or the ability to obtain it within twelve months is also required.

  maintenance management software, grounds equipment, boiler

  14d

  Facility Service Worker

  Saskatoon, SK

  On-site

  GO

  Government of Saskatchewan

  Candidates need working knowledge of building maintenance and operations, basic computer skills, and good physical condition to lift up to 50 lbs and climb ladders. A valid driver's licence and a valid Fireman Boiler Operator Certificate, or the ability to get it within twelve months, are also required.

  grounds equipment, maintenance management software, computer

• 14d

  Physiotherapy Assistant

  Beeton, ON

  LH

  Lifemark Health Group: A proudly Canadian healthcare company providing diversified healthcare services across the country

  Candidates need a PTA/OTA diploma or a degree in kinesiology or a similar healthcare field. Long-term care experience is an asset, and a valid Vulnerable Sector check and TB clearance are required.

  Ultrasound unit, TENS unit

• 14d

  Intermediate Mechanical Designer

  Greater Sudbury, ON

  $80k–$100k/yrOn-siteFull Time

  

  BESTECH: Yet, over the years, the company has grown with its clients’ needs and has diversified to become a recognized leader in delivering an extensive…

  4+ YOECandidates need a Diploma in Mechanical Engineering Technology, 4 to 10 years of relevant experience, AutoCAD and other CAD skills, and knowledge of codes such as ASME, CSA, ASHRAE and API. Strong communication, numerical reasoning and a valid driver's licence are also required.

  AutoCAD, MicroStation, SolidWorks, Inventor, Plant3D, Microsoft Office

• 14d

  Maintenance Mechanic

  Belleville, ON

  $38–$42/hr

  

  Sofina Foods Inc

  2+ YOESofina Foods needs candidates with at least 2 years of experience as an industrial or commercial millwright, a Red Seal Millwright licence, and the ability to lift 50 pounds, stand for long periods and work in extreme heat or cold. Candidates must be legally entitled to work in Canada and communicate in English.

  hydraulic equipment, pneumatic equipment, electrical equipment

• 14d

  Millwright

  Edmonton, AB

  $47.74–$49.67/hrOn-siteFull Time

  DS

  DPC Saputo Dairy Products Canada G.P.

  Candidates need a Millwright or Journeyman certificate and experience in manufacturing, ideally food processing. They must troubleshoot well, work independently and as part of a team, and follow GMP and food safety practices. Membership in UNIFOR Local 445 is required or must be obtained within 30 days.

  CMMS

17 companies