“basic testing equipment” jobs in Canada – Page 32

No matching filters. Try another name.

Results

• 4d

  Vehicle Equipment Supply Service Technician I

  Drumheller, AB

  

  Alberta Health Services

  Candidates need current ACOP registration in good standing, a current BCLS certificate, and a Class 4 Alberta Operator's Licence with a clean driver's abstract. Applicants without a current EHS clinical position must also hold a recent F.A.R.E. test certificate.

  Stryker power pro, Stryker power lift, Fleet Software, Holman, FEMS

  4d

  Vehicle Equipment Supply Service Technician I

  Fort Macleod, AB

  

  Alberta Health Services

  Candidates need active registration with the Alberta College of Paramedics, current Basic Cardiac Life Support certification, and a valid Class 4 Alberta driver's licence with a clean five-year abstract. Applicants without a current EHS Alberta clinical position also need a recent F.A.R.E. test certificate, and must be fit for heavy lifting, extended standing and travel to remote areas.

  Stryker power cot, Stryker power load, suction units, Fleet Software, Holman, FEMS

  4d

  Vehicle Equipment Supply Service Technician I

  Brooks, AB

  

  Alberta Health Services

  Candidates need current Alberta College of Paramedics registration in good standing and Basic Cardiac Life Support certification. They also need a Class 4 Alberta driver's licence with a clean five-year abstract, and must be able to handle heavy lifting, long periods of standing, travel and exposure to patients and difficult conditions.

  Stryker Power Pro, Stryker power lift, Holman, FEMS, Fleet Software, power cots

  4d

  Primary Care Paramedic

  McLennan, AB

  Full Time

  

  Alberta Health Services

  Candidates need current Alberta College of Paramedics registration as a Primary Care Paramedic, BCLS certification, and a Class 4 licence with a clean driver abstract. They must pass the F.A.R.E. physical test and be ready for full operational duties on the start date.

  ambulance, BLS airway adjuncts, non-emergent transport unit

  4d

  Advanced Care Paramedic

  Alberta

  Full Time

  

  Alberta Health Services

  Candidates need a non-restricted Advanced Care Paramedic registration with the Alberta College of Paramedics, current BCLS CPR, and a valid Class 4 Alberta licence with a clean five-year driver abstract. Applicants without a current clinical position must pass the F.A.R.E. physical test.

  ambulance, advanced life support airway adjuncts, non-emergent transport vehicles

  4d

  Advanced Care Paramedic

  Beaverlodge, AB

  Full Time

  

  Alberta Health Services

  Candidates need a non-restricted Advanced Care Paramedic registration with the Alberta College of Paramedics, current BCLS CPR, and a valid Class 4 Alberta Operator's Licence with a clean five-year driver abstract. Applicants must also be fit for demanding physical work and able to work in all weather.

  Ambulance, Advanced airway adjuncts

  4d

  Nurse Practitioner

  Edmonton, AB

  

  Alberta Health Services

  3+ YOECandidates need a Master's degree from an approved Nurse Practitioner program and active CRNA registration, plus at least three years of acute or ambulatory care experience. Chronic disease management, interdisciplinary teamwork and Connect Care training are also required.

  Connect Care

• 4d

  Food Services Assistant

  Kitchener, ON

  $25.14–$26.67/hrPart Time

  

  theregio03

  Candidates need a Grade 12 education, a food services certificate or enrollment in a food program, and a current Safe Food Handling Certificate. A vulnerable sector police check, a TB test and required immunizations are also needed, along with basic knowledge of the geriatric population and the ability to work shifts and weekends.

  dishwasher, hot food wells, snack and beverage carts

• 4d

  Maintenance Tech - Millwright

  Calgary, AB

  Full Time

  RB

  Refresco Brand

  Refresco needs a millwright journeyperson or a registered 4th year millwright apprentice with strong mechanical knowledge, including power transmission, pneumatics and hydraulics. Candidates should have experience with conveyors, pumps, compressors and packaging machinery, basic computer skills, and the ability to lift heavy loads.

  CMMS, Lathes, Welding equipment, Grinders, High-speed packaging machinery

• 4d

  Technical Service Representative, ACT (Calgary, Alberta)

  Calgary, AB

  $68k–$75k/yr

  

  Getinge

  1+ YOECandidates need a biomedical engineering degree or diploma and 1 to 3 years of field service, bio-med or technical repair experience. A valid driver's licence and passport are required, along with strong troubleshooting, communication and customer skills.

  Test instruments, Microsoft Office, Telephone equipment, Company vehicle

  4d

  Technical Service Representative, ACT (Mississauga, ON)

  Mississauga, ON

  $68k–$75k/yr

  

  Getinge

  1+ YOECandidates need a biomedical engineering degree or diploma and 1 to 3 years of field service or technical repair experience. A valid driver's licence and a passport for international travel are required.

  Microsoft Office, schematics and system diagrams, test instruments

• 4d

  Hiring T4

  Hamilton, ON

  $40/hrFull Time

  RT

  Ryder Truck Rental Canada Ltd. (Employer-Payroll)

  Candidates need extensive vehicle repair experience, strong mechanical skills, and ideally ASE certifications or Ryder qualifications. Strong written and verbal communication and the ability to work independently and in a team are also required.

  Diagnostic computers, Diagnostic software, Shop Management System, Manifold gauges, Charging and recovery equipment

• 4d

  Lab Technician III

  British Columbia

  $30/hrContract

  

  Agilus Work Solutions: Experts in Specialized Talent for Nearly 50 years. Canada's largest, full service, privately-owned recruiting firm.

  5+ YOECandidates need a chemistry or laboratory technology diploma or equivalent and at least 5 years of analytical and QA/QC experience. They must be local to British Columbia, pass pre-assignment drug and alcohol testing, and work well with limited direction.

  Anton Paar Densitometer/Viscometer, Automated titrator, Centrifuges, XOS X-ray fluorescence analyzer

• 5d

  Radiation Technologist, CT - Eagle Ridge Hospital

  Coquitlam, BC

  $43.24–$54.01/hr

  

  Fraser Health Authority

  1+ YOECandidates need CAMRT certification, completion of an advanced CT specialty program and one year of recent related experience. They also need CPR (BCLS) certification and must pass a physical fitness assessment for the job.

  PACS, radiology information system

  5d

  Registered Nurse, Surgical Services - Inpatient

  Abbotsford, BC

  $41.42–$59.52/hr

  

  Fraser Health Authority

  Candidates need graduation from an approved school of nursing and current RN registration with the BC College of Nurses and Midwives. Strong communication, assessment and organization skills are required, along with the physical ability to do the job.

  Continuous wave Doppler, Plethysmography equipment, Transcutaneous oxygen machine, Computer applications, Electronic health records

• 5d

  Civil Construction Surveyor - Prince Rupert (LOA Provided - BC Wide Applicants Welcome)

  Prince Rupert, BC

  $33–$42/hrFull Time

  

  Infracon Construction Inc.: With over 40-years of experience delivering innovative technology and client-focused construction services within Western and Northern Canadian…

  Candidates need previous civil construction surveying experience, a strong grasp of layout and grading, and skill with GPS, total stations and survey software. Ability to read drawings, work outdoors and travel for projects is required.

  GPS, Total station, Data collector, Level, Civil 3D, Survey software

• 5d

  Water / Wastewater Technologist (CAD Drafting)

  Edmonton, AB

  IE

  ISL Engineering & Land Services

  Candidates need drafting experience or a recent technical drafting, design or engineering education, and a meticulous, organized approach to work. Autodesk Plant 3D and Revit experience, field or industry exposure, and ASET or APEGA registration are considered assets.

  Autodesk Plant 3D, Revit, Civil 3D

• 5d

  Press Operator

  Markham, ON

  $25/hrFull Time

  

  Magna Powertrain Inc.

  1+ YOECandidates need Grade 12 education, at least one year of press environment experience, and a valid forklift and crane operator licence. Strong English and basic statistics, measuring equipment and documentation skills are also required.

  Presses, Vibra deburr machines, Part washers, Measuring equipment, Forklift, Shoplogix whiteboard

• 5d

  Service Technician

  Lively, ON

  On-siteFull Time

  CM

  CAN MOT|20900 Motion Canada Inc.

  Candidates need a high school diploma or GED, basic mechanical knowledge, and the ability to read hydraulic schematics. They must also be able to operate shop equipment safely, work with minimal supervision, communicate well, and hold a valid driver's licence.

  Shop equipment, Hydraulic schematics

• 5d

  REGISTERED PRACTICAL NURSE, CASUAL

  Windsor, ON

  $25.94/hr

  ?

  Liaisons with Residents, families, and outside agencies as required,; Completes weights and blood pressure checks as required,; Provides ongoing education to Associates to meet legislative requirements and learning…

  RPN, Personal care, Scheduling, Reporting, Documentation, Communication skills

• 5d

  Project Engineer- Centre Of Excellence

  Cambridge, ON

  A

  Aecon: (TSX: ARE) is a North American construction and infrastructure development company with global experience.

  Candidates need an engineering or related degree, or equivalent experience, with familiarity with ASME, CWB and AWS welding codes. Strong technical report writing, CAD skills in SolidWorks or Inventor, and a valid G driver's licence with a vehicle are required.

  SolidWorks, Autodesk Inventor, Microsoft Excel, Microsoft Word, robotics equipment, welding equipment

• 5d

  Business Assistant

  Estevan, SK

  S

  SaskPower

  2+ YOECandidates need a related diploma, certificate or degree, or equivalent, and two years of administrative or clerical office experience. They should have attention to detail, customer service skills, and the ability to use standard office software and work independently or in a team.

  fax machine, office equipment, databases

• 5d

  Heavy Duty Mechanic

  Edmonton, AB

  On-siteFull Time

  

  Amalgamated Mining Group

  Candidates need a Red Seal or Interprovincial Journeyman's Certificate as a HD Mechanic and experience with mining equipment such as CAT, Sandvik and Atlas Copco. Strong hydraulic and electrical troubleshooting, the ability to read schematics, basic welding, a valid driver's licence and the physical fitness for heavy lifting are also required.

  diagnostic equipment, measuring tools, hand tools, power tools

• 5d

  AOI Operator

  Toronto, ON

  Full Time

  TT

  TTM Technologies Toronto, Inc.

  1+ YOECandidates need at least one year of experience inspecting printed circuit boards, the ability to lift 15 pounds, strong visual attention to fine detail, and basic computer and English skills. A high school diploma or equivalent is preferred. Applicants must be Canadian citizens or permanent residents due to Controlled Goods Program requirements.

  Hypot, Electrical test equipment, Computer application

16 companies