“Electro-mechanical tools” jobs in Canada – Page 9

No matching filters. Try another name.

Results

• 1mo

  Sr. Associate, Manufacturing Engineering, Mechanical Projects 1

  Waterdown, ON

  

  L3Harris Technologies

  2+ YOECandidates need 2 to 4 years of manufacturing engineering experience, ideally in high-tech or high-reliability settings, with working knowledge of wire harness assembly and electro-mechanical processes. A mechanical, manufacturing or related engineering degree or diploma is required, and the ability to read mechanical drawings and electrical schematics is needed.

  SolidWorks, Composer, AutoCAD, MES

  1mo

  Project Engineering Co-Op (Waterdown, CAN)

  Waterdown, ON

  

  L3Harris Technologies

  Candidates need enrollment in an electrical or mechanical engineering program or equivalent. Experience with electro-mechanical systems, optics or lasers is an asset, along with familiarity with SolidWorks, advanced MS Office skills, and strong problem-solving and communication abilities.

  SolidWorks, MS Office

  1mo

  Opto-Mechanical Design Co-Op (Waterdown, CAN)

  Toronto, ON

  $25/hr

  

  L3Harris Technologies

  Candidates need to be enrolled in a bachelor's or advanced degree in mechanical engineering, mechatronics, engineering physics or physics. They should know mechanical design and optics basics, and ideally SolidWorks and optical design software like Zemax.

  SolidWorks, Zemax, Code V, Oslo, MATLAB

  1mo

  Systems Engineering (R&A) Co-Op (Waterdown, CAN)

  Waterdown, ON

  

  L3Harris Technologies

  Candidates need to be pursuing a bachelor's degree in an engineering, computer science, physics, mathematics or related field. They need strong report writing, advanced MS Office skills, and a good grasp of both mechanical and electrical engineering.

  MATLAB, Python, Simulink, MS Office, Database management tools

  1mo

  Specialist - Project Engineer

  Waterdown, ON

  

  L3Harris Technologies

  4+ YOECandidates need a bachelor's degree with 4 years of relevant experience, or a graduate degree with 2 years, or 8 years without a degree. Strong communication, project planning, and technical knowledge of electro-mechanical systems are required.

  JIRA, Confluence, MS Project, Microsoft Office

  1mo

  Project Engineering Co-Op (Waterdown, CAN)

  Waterdown, ON

  $25/hr

  

  L3Harris Technologies

  Candidates need enrollment in an electrical or mechanical engineering (or similar) bachelor's program in good standing with an accredited university co-op program. Experience with electro-mechanical or optical systems, SolidWorks or Cadence, and advanced MS Office skills are assets, along with strong communication and problem-solving skills.

  SolidWorks, Cadence, MS Office

  1mo

  Manager, Mechanical Engineering

  Waterdown, ON

  

  L3Harris Technologies

  9+ YOECandidates need a bachelor's degree with at least 9 years of related experience, or a graduate degree with 7 years, or 13 years of experience without a degree. They must have strong leadership, project management, opto-mechanical design and CAD (SolidWorks) skills.

  SolidWorks

• 1mo

  Senior Procurement Specialist

  Ottawa, ON

  Full Time

  

  March Networks

  7+ YOECandidates need 7+ years of strategic sourcing or procurement experience in electronics or networking, hands-on NPI and BOM analysis, complex supplier negotiation skills, and ERP proficiency. A bachelor's degree in engineering, supply chain or business is required.

  SAP, Excel, Agile PLM

• 1mo

  Manufacturing Engineer III

  Burnaby, BC

  Full Time

  V

  Verathon

  5+ YOEVerathon needs a candidate with a mechanical, electrical or manufacturing engineering degree, EIT status (P.Eng preferred), and five-plus years of experience. Strong skills in Lean and Six Sigma, tolerance analysis, design of experiments and reading drawings are required.

  PLC, Test equipment, Jigs and dies

  1mo

  Manufacturing Technologist I

  Burnaby, BC

  $23.71–$27.88/hrFull Time

  V

  Verathon

  Candidates need a technologist diploma in mechanical, electrical or manufacturing technology, and eligibility for ASTTBC registration. They also need 0 to 3 years of experience, analytical problem-solving skills, and an understanding of electrical and mechanical design and testing.

  test equipment, production tooling, jigs, dies

• 1mo

  Human Resources Business Partner

  Woodbridge, ON

  $72k–$99k/yr

  

  ATS Automation: ATS’ reputation, knowledge, global presence and standard automation technology platforms differentiate the Company and provide competitive…

  3+ YOEATS Automation needs three to five years of HR Business Partner or HR Generalist experience, ideally in manufacturing or engineering. Candidates need a post-secondary degree in human resources, CHRP designation completed or in progress, and knowledge of Ontario employment standards.

  Sales, Recruitment, Employee relations, Performance management, HR policies, Regulatory compliance

• 1mo

  Assembly Lab Lead-Hand

  Moncton, NB

  Full Time

  

  Apex Industries

  Apex Industries needs candidates with experience in mechanical, electrical or industrial equipment assembly and in coordinating a manufacturing team. Candidates also need strong communication, planning, technical drawing interpretation and problem-solving skills, plus ERP and Microsoft Office experience.

  ERP system, Microsoft Office, Syspro

• 1mo

  Service Technician

  Calgary, AB

  

  ASSA ABLOY

  Candidates need mechanical aptitude and experience repairing electro-mechanical devices, knowledge of basic electrical circuits and 120v wiring, and a valid driver's licence. Candidates must be 21 or older and obtain AAADM certification within twelve months.

  Power tools, Ladders

  1mo

  Installation Technician

  St. Laurent, MB

  

  ASSA ABLOY

  3+ YOE3 to 5 years of industry or storefront door experience; Mechanical aptitude with electro-mechanical repair; Knowledge of basic electrical circuits and 120V wiring

  power tools, ladders, low-voltage wiring tools

  1mo

  Service Technician

  Abbotsford, BC

  $35–$48/hr

  

  ASSA ABLOY

  Candidates need mechanical aptitude with electro-mechanical repair experience, basic electrical and 120v wiring knowledge, and a valid driver's licence. They must be at least 21 and able to obtain AAADM certification within one year.

  power tools, ladders

• 1mo

  Supplier Development Specialist

  Calgary, AB

  Full Time

  

  Blackline Safety

  5+ YOECandidates need an engineering bachelor's degree and at least 5 years in manufacturing process improvement and supplier quality. Experience with injection molding, die casting, stamping, coating, root-cause analysis and corrective action is required.

  Lean manufacturing, Root cause analysis, Performance management, SPC, Process improvement, Quality control

• 1mo

  Mechanical Technician

  Mississauga, ON

  $25/hr

  

  AGFA

  Candidates need a high school diploma and a technical trade certificate in electrical, mechanical, machine building or software interfaces. The posting asks for 0-5 years in a mechanical production environment and the ability to read blueprints, schematics and diagrams.

  hand tools, precision measuring instruments, calibration equipment, test instruments, electronic manufacturing tools

• 1mo

  EGS Field Technician - Caterpillar Power Systems (Gensets & Diesel Engines)

  Brampton, ON

  Full Time

  

  Toromont Cat: Established in 1993, Toromont Cat is a division of Toromont Industries (TSX: TIH), a publically traded, diversified growth company incorporated in…

  3+ YOECandidates need post-secondary education in a related field such as diesel engines, electro-mechanics or industrial mechanics. They also need at least 3 years of hands-on experience servicing generators, heavy engines or heavy equipment.

  electrical testing equipment, mechanical testing equipment, load bank

• 1mo

  Electrical Technician

  Brampton, ON

  $24–$26/hrFull Time

  

  Metro Compactor Service

  2+ YOECandidates need at least 2 years of hands-on experience with control panels and sensors, and must be able to read electrical drawings. PLC commissioning experience and hydraulic experience are assets, and forklift operation is an asset.

  PLC, HMI, voltmeter, drills, screwdrivers, hammers

• 1mo

  Maintenance Technician

  Delta, BC

  $27.98–$34.98/hrFull Time

  

  FYidoctors: Doctor-led, professionally managed, and patient focused, FYidoctors is Canada’s largest eye care provider, headquartered in Calgary, AB.

  3+ YOECandidates need a two-year technical degree or three years of related industrial experience, strong electro-mechanical problem-solving skills, and comfort working rotating shifts. Physical ability to lift 50 lbs, climb and stand for long periods, plus computer skills in MS Office, are also needed.

  CMMS, hoists, hand tools, power tools, precision measuring instruments, MS Excel

• 1mo

  Design Engineer

  Winnipeg, MB

  On-siteFull Time

  LN

  Linamar - New

  Candidates need an accredited engineering or technology diploma, eligibility for APEGM or CTTAM registration, CAD and FEA skills, and knowledge of mechanical, hydraulic and electro-mechanical systems. A farm background and hands-on machining or welding experience are valued.

  CAD system, FEA software

• 1mo

  Electrician (Journeyperson)

  Kamloops, BC

  $47.87/hrFull Time

  AC

  Armstrong Collective Brand

  3+ YOERocky Mountaineer needs a Certificate of Qualification as an Electrician with Red Seal endorsement, ideally in industrial electrical work. Candidates should have three or more years of instrumentation or industrial experience, along with PLC and automation skills such as Siemens S7 and TIA Portal, and the ability to read wiring diagrams.

  Siemens TIA Portal, Siemens SIMATIC S7-1500 PLC, Siemens SIMATIC ET200SP, electrical test equipment

• 1mo

  Technical Field Service Technician

  Edmonton, AB

  RemoteFull Time

  

  BEUMER Group: To achieve long-term success, a company needs sustainable development and reliable partnerships.

  5+ YOECandidates need 5+ years of field service or commissioning experience in mining or heavy industry, strong electrical and control system skills, and the ability to read schematics. A technical diploma or equivalent experience is required, and they must be willing to travel 50–80%.

  PLC, ServiceNow, schematics, wiring diagrams, industrial networks

• 1mo

  Manufacturing Engineering Technologist

  Vancouver, BC

  $65k–$70k/yrOn-siteFull Time

  

  Response Biomedical: develops, manufactures and markets the RAMP® system, a rapid diagnostics platform that delivers lab quality performance for efficient patient…

  5+ YOECandidates need at least 5 years of experience in electronics manufacturing or instrumentation, plus a diploma or degree in an engineering technology field. Strong electronics troubleshooting, test equipment skills and the ability to read schematics are needed, and regulated-industry experience is preferred.

  Multimeter, Oscilloscope, Power supply, Calibration devices, Microsoft Word, Microsoft Excel

15 companies