“Punching machine” jobs in Canada – Page 4

No matching filters. Try another name.

Results

• 24d

  Brakepress Operator / General Labourer

  Burford, ON

  $20–$22/hrContract

  

  Randstad Canada

  1+ YOECandidates need 1 to 2 years of metal fabrication, machine operation, or industrial shop experience, the ability to set up brake presses and read blueprints, and skill with calipers, micrometers and tape measures. They must be able to lift up to 50 lbs, wear steel-toed boots and communicate clearly in English.

  brake press, punches, dies, calipers, micrometers, measuring tape

  26d

  Tool and Die Maker

  Concord, ON

  $38–$42/hrFull Time

  

  Randstad Canada

  3+ YOECandidates need experience maintaining progressive and transfer dies in an automotive stamping plant, or an active apprenticeship with hands-on die shop experience. They must read engineering drawings, operate mills, lathes and grinders, and lift up to 50 lbs.

  surface grinder, conventional mill, engine lathe, drill press, precision measuring instruments

  29d

  CNC Machine Operator

  Milton, ON

  $21–$23/hrContract

  

  Randstad Canada

  1+ YOECandidates need a high school diploma and at least one year of fabrication experience on shearing, punching or bending machines. They must be legally authorized to work in Canada and live within 80 km of Milton, ON.

  Shearing machine, Punching machine, Dynamic Machine Management (DMM), Enovia, Drawing vault software

  29d

  CNC Machine Operator

  Milton, ON

  $23–$24/hrContract

  

  Randstad Canada

  1+ YOECandidates need a high school diploma and at least one year of fabrication experience on shearing, punching or bending machines. They must be legally authorized to work in Canada and live within 80 km of Milton, ON.

  Shearing machine, Punching machine, Bending machine, Dynamic Machine Management (DMM), Enovia, Drawing vault software

  29d

  Skilled General Labourer

  Brantford, ON

  $23–$26/hrContract

  

  Randstad Canada

  Candidates need prior machine operating experience in metal manufacturing, strong mechanical aptitude, and solid spoken and written English for safety and technical instructions. Ability to lift up to 50 lbs and stand through full shifts is required, and a forklift licence is preferred but not required.

  brake press, CNC machine, punch press, forklift, measuring tools, hand tools

  29d

  Experience Mechanical Assembler

  Milton, ON

  $21–$23/hrContract

  

  Randstad Canada

  2+ YOECandidates need at least 2 years of mechanical assembly experience with power tools and the ability to read engineering drawings and models. They must have a high school diploma, basic English, and legal eligibility to work in Canada.

  power tools, high power torque tools, jigs/fixtures, punch press, band saw, pallet truck

  29d

  Experience Mechanical Assembler

  Milton, ON

  $21–$23/hrContract

  

  Randstad Canada

  2+ YOECandidates need at least 2 years of mechanical assembly experience using power tools, and must read and follow engineering drawings and models. They also need a high school diploma or equivalent, basic English, and legal eligibility to work in Canada without sponsorship.

  Power tools, Torque tools, Punch press, Band saw, Pallet truck, Ladder

• 25d

  CNC Set-up Operator

  Brampton, ON

  $22.44–$27.55/hrFull Time

  

  Almag Aluminum

  1+ YOEAlmag Aluminum needs candidates with 1-2 years of CNC set-up or machine operation experience and strong math and measuring skills. They must read drawings, use precision measuring tools, and train other employees in clear English.

  CNC machine, Mastercam, Epics, Punch press, Press brake, Faro CMM

• 25d

  Converting Machine Operator

  Huntsville, ON

  $24.66/hrFull Time

  ?

  3+ YOEYou perform at the highest level possible, and you appreciate a performance culture fueled by authentic caring; You want to be part of a company actively dedicated to sustainability, inclusion, wellbeing, and career…

  Good manufacturing practices, Housekeeping, UKG, SAP, Troubleshooting, Time management

• 25d

  CNC Machining Process Specialist

  Sydney, NS

  On-siteFull Time

  

  Protocase Inc./45Drives Ltd.: Leading Manufacturer of Custom Electronic Enclosures & Parts for Science, Engineering and Innovation

  3+ YOECandidates need at least 3 years of CNC machining experience, a machining or manufacturing technology diploma or equivalent hands-on experience, and working knowledge of G-code and CAM software. Strong problem-solving skills, 5-axis milling experience and clear communication are also needed.

  CNC mill, 5-axis mill, CNC lathe, Coordinate Measuring Machine (CMM), CAM software

• 25d

  Brake Press Operator

  Brampton, ON

  

  Savaria Corporation

  3+ YOESavaria Corporation needs candidates with at least 3 to 5 years as a brake press operator in a manufacturing plant, a high school diploma or specialized training, and the ability to read blueprints and use precision measurement tools. Candidates must also lift 35 pounds and stand for long periods.

  CNC brake press, Caliper, Measurement tools, Blueprints

• 25d

  Aviseur technique - Turbine/alternateur mévanique (Manic 3)

  Baie-Comeau, QC

  Full Time

  

  GE Vernova: GE Vernova is a purpose-built energy technology company on a mission to electrify to thrive and decarbonize the world.

  5+ YOEDiplôme d'ingénieur en mécanique, électricité ou génie civil, ou équivalent; Minimum de 5 ans d'expérience en génératrices hydroélectriques, de préférence en supervision; Minimum de 5 ans d'expérience en installation de

  MS Office, outils de précision mécaniques, outils d'usinage sur site, moyens de mesure

• 25d

  Maintenance Technician

  Abbotsford, BC

  Full Time

  

  Goldbeck Recruiting: Goldbeck Recruiting is a recruitment and executive search firm based in Vancouver, BC helping companies fill challenging positions since 1997.

  3+ YOECandidates need at least three years of mechanical, automotive or production equipment repair, two years of mobile equipment work, and forklift operator certification. A Class 5 licence with a clean driving record, WHMIS training and strong English communication are required.

  forklift, pallet jack, CNC machine, hand tools, Microsoft Outlook, Microsoft Word

• 25d

  Customer Service Representative

  Vernon, BC

  $18.25–$19/hr

  UC

  U-Haul Co. (Canada) Ltd.

  Candidates need a valid driver's licence with a good driving record and a high school diploma or equivalent. Friendly, customer-focused people who can lift equipment of at least 50 lbs and work both indoors and outdoors are preferred.

  U-Scan, forklift

• 25d

  AOI Operator

  Toronto, ON

  Full Time

  TT

  TTM Technologies Toronto, Inc.

  1+ YOECandidates need at least one year of experience inspecting printed circuit boards, the ability to lift 15 pounds, and English reading and writing skills. Basic computer and email skills and strong visual attention to fine detail are also required. A high school diploma is preferred, and applicants must be Canadian citizens or permanent residents.

  Automatic optical inspection equipment, Electrical test equipment, Hypot, computer application

• 26d

  Maintenance Technician

  Abbotsford, BC

  $30–$35/hr

  

  Phantom Screens: is North America's leading provider of retractable screens for doors, windows and large openings such as patios, porches and verandas.

  3+ YOECandidates need a Grade 12 diploma or equivalent, 3+ years of mechanical, automotive or production equipment maintenance (2+ on mobile equipment), a Class 5 licence, forklift operator certification, WHMIS, and strong English communication.

  forklift, pallet jack, CNC machines, Microsoft Office, hand tools

  26d

  Maintenance Technician

  Abbotsford, BC

  $30–$35/hr

  

  Phantom Screens: is North America's leading provider of retractable screens for doors, windows and large openings such as patios, porches and verandas.

  3+ YOECandidates need a Grade 12 diploma or equivalent, 3+ years of mechanical, automotive or production equipment maintenance (2+ on mobile equipment), a Class 5 licence, forklift operator certification, WHMIS, and strong English communication.

  forklift, pallet jack, CNC machines, Microsoft Office, hand tools

• 26d

  Tool Setter

  Calgary, AB

  

  IMT CORPORATION

  Candidates need mechanical aptitude, experience with hand tools and the ability to read blueprints and production cards. Solid math, attention to detail and comfort in a heavy industrial environment are also required.

  hand tools, angle grinder, pedestal grinder, calipers, tape measure, presses

• 26d

  Dishwasher - Kitchen - Turtlejacks West Kelowna

  West Kelowna, BC

  

  Days Hospitality Limited

  Candidates need to be organized, detail-focused and able to multitask while staying on their feet for the full shift. They must be flexible about shifts and able to follow company and brand cleanliness standards.

  industrial dishwasher

• 26d

  General worker Fabrication - NIGHT shift

  Candiac, QC

  $22.26/hr

  SI

  Stella-Jones Inc.

  Candidates need to be able to lift and move materials, use hoists and hand tools safely, and read drawings and inspection forms after training. Working nights from Sunday to Thursday is part of the role.

  hoist, hand tools, rotary grinding wheel, drill, punching machine

• 27d

  Marketing Manager - EdTech (French fluent 🇫🇷)

  Toronto, ON +1

  RemoteFull Time

  

  Paradox

  3+ YOECandidates need 3-5 years in marketing with both strategic and hands-on execution experience, plus a portfolio of shipped tests, landing pages or automations. Fluency in French and English is required, and daily use of AI tools is expected.

  Claude Code, GA4, Looker Studio

• 28d

  Senior Gameplay Software Engineer - EA SPORTS™ UFC

  Vancouver, BC

  

  Electronic Arts

  5+ YOECandidates need 5+ years of professional game development experience, advanced C++, and knowledge of physics, 3D math and performance profiling. Electronic Arts also values experience with AI tools and a bachelor's degree or equivalent experience.

  C++, Perforce, Git

• 28d

  Converting Machine Operator

  Huntsville, ON

  $24.66/hrFull Time

  ?

  3+ YOEYou perform at the highest level possible, and you appreciate a performance culture fueled by authentic caring; You want to be part of a company actively dedicated to sustainability, inclusion, wellbeing, and career…

  Good manufacturing practices, Housekeeping, UKG, SAP, Troubleshooting, Time management

• 29d

  CNC Programmer/Operator - afternoon shift

  Newmarket, ON

  $24–$27/hrFull Time

  

  Martinrea International Inc.: The company employs approximately 19,000 skilled and motivated people at more than 58 manufacturing, engineering and technical centers in Canada,…

  5+ YOECandidates need Grade 12 and either five years of automotive experience or a CNC college diploma or certificate. They must read engineering drawings, program in 2D and 3D, communicate well in English, and be competent on an overhead crane.

  Mastercam, CNC machine, mill, radial drill, surface grinder, overhead crane

16 companies