“schematic tools” jobs in Canada – Page 19

No matching filters. Try another name.

Results

• 10d

  Journeyperson Electrician

  Saskatoon, SK

  Full Time

  

  Dynamo: Dynamo is a design-build and maintenance oriented company that specializes in power and control solutions for industrial and utility clients.

  Candidates need a valid Saskatchewan Journeymans License and a valid driver's licence with a drivers abstract. Experience with high-voltage equipment, cable management and medium/high-voltage terminations is required, and industrial, utility or substation experience is an asset.

  electrical testing devices, transformers, circuit breakers, motors, electrical panels

• 10d

  Concrete Placing Foreman

  Calgary, AB

  $45/hrFull Time

  

  Giusti Group of Companies

  5+ MgmtCandidates need proven construction management experience with concrete placement, at least 5 years of supervisory experience on large sites, OSHA knowledge, and the ability to run placing equipment. Strong communication and blueprint reading are essential.

  concrete vibrators, power screeds, construction management software

• 10d

  Design Engineer

  Regina, SK

  Full Time

  

  Brandt in Canada

  2+ YOECandidates need a Mechanical Engineering degree or equivalent and 2+ years of engineering experience. Strong 3D CAD skills (SolidWorks preferred), good written and verbal communication, and attention to detail are required.

  SolidWorks, 3D CAD, ERP systems

• 10d

  Electrical Wire Harness Assembler

  Brant, ON

  TI

  Tigercat Industries

  Candidates need good hand dexterity, attention to detail, and the ability to read electrical drawings and schematics. Basic math, mechanical aptitude with hand and power tools, and the ability to tell coloured wires apart are also required.

  hand tools, power tools, crimp press, wire twister, wire stripper, routing board

• 10d

  Assembler II

  Markham, ON

  Contract

  LR

  Leap Recruitment Partners

  1+ YOECandidates need a high school diploma or GED, at least one year of manufacturing experience, and the ability to read assembly drawings and schematics. An electrical engineering background is preferred, along with basic computer skills.

  SAP

• 10d

  Industrial Electrician

  Brantford, ON

  

  Hilton Food Group Plc

  3+ YOECandidates need a valid Ontario Industrial Electrician (442A) or Construction & Maintenance (309A) licence and an approved apprenticeship. Strong knowledge of PLCs, industrial automation and reading electrical drawings is required, with 3 to 5 years of industrial electrical experience preferred.

  PLC, HMI, CMMS, variable frequency drive, servo drive, Siemens PLC

• 10d

  Mechanical Designer

  Elmira, ON

  $35–$43/hrFull Time

  

  Tri-Mach Group Inc.

  3+ YOECandidates need a post-secondary diploma or degree in mechanical engineering or design and at least 3 years of mechanical design experience. Advanced SolidWorks and AutoCAD skills, metal fabrication knowledge and BOM experience are required, with simulation and hydraulic or pneumatic experience as assets.

  SolidWorks, AutoCAD, Autodesk, ERP system

• 10d

  EIC Technician, Int/Sr - 14/14 - New Mexico & Texas - White Tail Automation

  Calgary, AB

  On-site

  

  Crimson Group

  5+ YOECrimson Group needs a journeyman instrument technician with strong electrical knowledge and 5 to 10 years of process control experience. Candidates should be skilled at fault finding, control valve repair and reading schematics, and be able to work with minimal supervision.

  PLC, analyzers, measurement test equipment, pneumatic actuators, hydraulic actuators, company truck

• 10d

  HVAC/R Technician - Commercial & Industrial Service

  Winnipeg, MB

  Full Time

  

  Black & McDonald Limited: Black & McDonald is an integrated, multi-trade service provider that safely delivers high-quality construction, facilities management, and technical…

  Candidates need a journeyperson HVAC/R trade certification and experience in commercial or industrial HVAC/R service. They must read technical drawings and manuals, work independently, communicate well with customers, and be physically able to lift, climb and work in confined spaces.

  Service vehicle, Mobile service management platform

• 10d

  E-Lab Technician

  Whitby, ON

  $70k–$85k/yr

  

  Alstom

  Candidates need soldering and circuit board repair experience, plus the ability to read electrical schematics and diagnose AC and DC faults. Electro-mechanical repair experience and Microsoft Office and Windows skills are also essential.

  Multimeter, Oscilloscope, Insulation tester, Microsoft Office

• 10d

  Power HVAC Mechanic

  Bolton, ON

  Full Time

  UR

  United Rentals of Canada, Inc.

  1+ YOECandidates need a high school diploma or equivalent and 1 to 2 years of diesel or HVAC repair experience. They must own applicable tools, hold a valid driver's licence, and be able to frequently lift up to 45 lbs.

  Diesel engine diagnostic equipment, HVAC equipment

• 10d

  Senior Power Systems Engineer

  Fredericton, NB +2

  HybridFull Time

  

  Stantec

  15+ YOECandidates need a bachelor's degree in electrical engineering and a Professional Engineer licence in a Canadian province, eligible for licensing in NB, NS or NL. They need at least 15 years of electrical design experience, protection and control knowledge, and hands-on power system analysis software experience.

  ETAP, EasyPower, CYME, CDEGS, SKM Power*Tools, digital multifunction protection relays

• 10d

  Field Service Representative (FSR)

  Esquimalt, BC

  $53/hrContract

  

  Insight Global: Insight Global is an international talent and consulting company that delivers business outcomes in an ever-changing world.

  6+ YOECandidates need a degree in electrical engineering with 6+ years of relevant experience, or a certified communications or electronics technician with 8+ years of hands-on work. They must have strong electrical troubleshooting, wiring and test equipment skills, and a valid driver's licence and ability to obtain a passport.

  Multimeter, Oscilloscope, Multifunction process calibrator, Hand and power tools, IPMS, DRMIS

• 10d

  Production Microscope Soldering Technician - Internal Failure Analysis Department

  Burlington, ON

  Full Time

  EM

  Evertz Microsystems Limited: Evertz Microsystems (TSX:ET) is a leading global manufacturer of broadcast equipment and solutions that deliver content to television sets,…

  Evertz Microsystems needs candidates with proven fine-pitch soldering and rework experience under a microscope, strong manual dexterity, and the ability to read blueprints, schematics, ECOs and BOMs. Candidates also need a solid understanding of PCB assembly and comfort working at a microscope for long periods.

  soldering irons, hot-air rework equipment, microscope, desoldering tools, solder removal equipment

• 10d

  Senior Instrumentation & Controls Engineer 1 - Nuclear

  Ontario

  Full Time

  

  Sargent & Lundy: Founded in 1891, the firm is a global leader in power, energy, and decarbonization with expertise in grid modernization, renewable energy, energy…

  5+ YOECandidates need an engineering degree from an accredited program, at least 5 years of process control design experience, and experience reviewing others' design drawings. Nuclear and CANDU control system experience is preferred.

  PLC, DCS, touchscreen displays, network switches

  10d

  Lead Instrumentation & Controls Engineer 1 - Nuclear

  Ontario

  Full Time

  

  Sargent & Lundy: Founded in 1891, the firm is a global leader in power, energy, and decarbonization with expertise in grid modernization, renewable energy, energy…

  10+ YOECandidates need an engineering degree from an accredited program and over 10 years of instrumentation and controls design experience. Experience with CANDU reactor control systems and reviewing design drawings is needed, and a P.Eng. is preferred.

  PLC, DCS, HSI

• 10d

  Job ID #32326: Project Manager, Hamilton Water Facilities

  Hamilton, ON

  HybridFull Time, Temporary

  

  City of Hamilton

  Candidates need a degree or diploma in engineering, facility management or a related field, plus project management and unionized municipal experience. Strong communication, leadership, knowledge of Ontario building and safety codes, CMMS (Infor EAM preferred) and Microsoft Office are required.

  Infor EAM, CMMS, Beyond Compliance Operating System, Microsoft Project, Microsoft Excel, Microsoft Word

• 10d

  Assistant Manager I

  Arnprior, ON

  $18.20/hrPart Time

  DT

  DOLLAR TREE STORES CANADA, INC.

  Dollar Tree Canada needs candidates who can read and explain operational directives and communicate clearly in writing and in person. Retail, grocery or drug store management experience is preferred, and the candidate must be able to lift up to 55 lbs. and stay on their feet for long periods.

  cash register, POS, merchandise schematics

• 10d

  4th Class Power Engineer

  Lethbridge, AB

  Per diem

  

  Covenant Health

  2+ YOECandidates need a 4th Class Power Engineer Certificate, strong mechanical and problem-solving skills, and clear communication in English. Two years of hospital or long-term care experience and familiarity with CMMS and building automation systems are preferred.

  Test instruments, CMMS/eFacilities, BCMS/BAS, Microsoft Excel, Microsoft Word, Outlook

• 10d

  Assembly Specialist – Full-Time

  Guelph, ON

  $19–$21/hrContract

  

  Randstad Canada

  1+ YOECandidates need at least one year in a manufacturing, assembly line, mechanical or warehouse setting, a strong attendance record, and the stamina to stand for 8 to 12-hour shifts and lift 30 to 50 lbs repeatedly.

  pneumatic fasteners, power equipment, manual hand tools

• 10d

  Engineering Technician

  Vancouver, BC

  $53k–$56k/yrOn-siteFull Time

  

  MineSense

  Candidates need a technician certificate in mechanical, electrical or mechatronics, 0-2 years of related experience, and hands-on assembly and fabrication skills. They must read drawings and schematics, use a PC for tests and reports, and be able to operate a sit-down forklift.

  Hand tools, Multimeter, Forklift, PC

• 10d

  Sr. Controls Programmer

  Toronto, ON

  $50–$55/hrContract

  

  Actalent: Actalent is an operating company of Allegis Group, the global leader in talent solutions.

  7+ YOECandidates need 7+ years of hands-on controls programming, strong Allen-Bradley Studio 5000 and ControlLogix skills, and experience commissioning equipment and integrating robotics, motion, safety and industrial networks. Strong electrical troubleshooting, schematic reading and willingness to travel to customer sites are also required.

  Studio 5000, ControlLogix, TIA Portal, Omron, FactoryTalk View, WinCC

  10d

  Sr. Controls Programmer

  Windsor, ON

  $50–$55/hrContract

  

  Actalent: Actalent is an operating company of Allegis Group, the global leader in talent solutions.

  7+ YOECandidates need 7+ years of hands-on controls programming experience, strong Allen-Bradley and PLC troubleshooting skills, and experience commissioning automated equipment. They must read electrical schematics and be willing to travel to customer sites.

  Studio 5000, ControlLogix, TIA Portal, Omron, FactoryTalk View, WinCC

• 10d

  Wiring Technician L2 (ECS)

  Mississauga, ON

  

  MAD Elevator Inc

  2+ YOECandidates need a college diploma in electrical or equivalent professional experience, and at least 2 years in manufacturing is preferred. Mechanical or electromechanical assembly experience is an asset, along with the ability to understand electrical and electronic components in a control panel.

  CAD schematics, Electrical measuring devices

22 companies